Gjlrgear STG6954KB LED Wireless Speaker Instruction Manual

Gjlrgear STG6954KB LED Wireless Speaker

Product Information

Specifications

• Dimensions: 102x130mm, 204x130mm
• Weight: 80g++

Product Usage Instructions

1. Unboxing

When you receive your product, carefully remove it from the packaging. Check for any visible damage and ensure all included accessories are present.

2. Powering On

To power on the product, locate the power button usually located on the front or side panel. Press and hold the power button until you see the indicator lights turn on or hear a startup sound.

3. Setting Up

Follow these steps to set up the product:

1. Connect any necessary cables to the appropriate ports on the product and your device.
2. If applicable, insert batteries into the product.
3. Place the product in a stable and suitable location.
4. Adjust any settings or preferences using the control panel or included remote control.

4. Basic Operation

Once the product is powered on and set up, you can perform basic operations:

• Use the buttons or touchpad on the product to navigate menus and select options.
• If provided, use the remote control for convenient operation.
• Refer to the user manual for specific instructions on using different features and functions of the product.

5. Maintenance and Care

To ensure your product remains in good condition and prolong its lifespan, follow these maintenance tips:

• Regularly clean the product’s exterior using a soft, lint-free cloth.
• Avoid using harsh chemicals or abrasive materials that may damage the product.
• Keep the product away from direct sunlight, extreme temperatures, and excessive moisture.
• Refer to the user manual for any additional maintenance instructions specific to your product.

FAQ

Q: How do I change the settings on the product?

A: To change settings, navigate to the “Settings” menu using the control panel or remote control. From there, you can adjust various options such as display settings, sound settings, and connectivity preferences.

Q: Can I use the product with batteries only?

A: It depends on the specific product model. Some products are designed to be powered by batteries only, while others require a power adapter or a combination of both. Refer to the user manual or product specifications for information on power sources.

Q: How do I clean the product’s screen?

A: To clean the product’s screen, use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution specifically designed for electronic screens. Gently wipe the screen in a circular motion, avoiding excessive pressure or spraying liquids directly onto the screen. Dry the screen completely before powering on the product.

Sound Reactive LED

• Press and hold light button to turn RGB LED light On/Off.
• Short press light button to change light mode.
• 4 color changing light modes display 8 LED colors.
• Sound reactive LED mode changes colors to the beat of the music.

Care Tip: Periodically wipe clean with soft cloth. Never use abrasive cleaning agent or get wet.

WARNING! IMPORTANT CARE AND SAFEGUARDS

Failure to follow safety instructions can lead to fire, shock, personal injury or property damage and damage to product.

• The product contains small parts and is not suitable for children
• Do not use this product for anything other than its intended use
• Device must be Bluetooth® enabled to connect wirelessly
• Device must be compatible with 3.5mm AUX cable for wired connection
• The product is not waterproof
• Do not expose this product to rain, water or excessive humidity
• Do not store this product next to heat sources or in direct sunlight
• Do not handle this product with wet hands
• Extreme hot and/or cold weather may damage this product
• Always use this product in operating temperatures of 32°F(0°C) – 95°F(35°C)
• Never take this device apart and always get repaired by a qualified technician
• Do not use this product if it has been damaged in any way
• This product contains one or more internal batteries, please dispose responsibly

FCC Disclaimer

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including I CAN TO RIED MODIFICATIONS TO THIS EQUIPMENT. SUCH’ MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT. The Bluetoothe word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

Charging Speaker

• Connect USB charging cable to Type-C port on speaker and USB power source (Included).
• LED indicator light is red while charging and will turn off when complete.

Pair and Connect

• Press and hold power button to turn On/Off.
• Speaker default is Bluetooth® pairing mode.
• Open Bluetooth® menu on your smartphone and search for new devices.
• Connect to LED SPEAKER. An alert will sound indicating speaker is connected.
• Speaker will reconnect to smartphone automatically after initial pairing. If auto-reconnect does not occur then repeat the steps above.

Music Playback / Voice Calls

• Control music playback and volume with your smartphone in Bluetooth® mode.
• Use music control buttons to play/pause, adjust volume and select track.
• Short press to select next or last track.
• Long press to increase or decrease volume.
• Built-in microphone for calls. Short press Play/Pause button to answer and end calls. Long press button to reject call or double press redial last number.
• Connect 3.5mm audio cable (not included) to AUX port for wired connection.
• Insert TF memory card (not included) that is already loaded with music playlist into TF card slot. TF playback will start automatically.

Specification

Bluetooth® 5.3

• Range: 30 Ft. (10 Meters)
• Power Input: USB 5V/1A
• Power Output : 5 Watts
• Max Volume : 115dB
• Battery Type: Lithium
• Battery Capacity : 500 mAh
• Playback Time : Up to 3-4 Hours*
• Charging Time: Approx. 2-3 Hours 3.5mm AUX IN Port TF Card Slot

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. RF Exposure Information The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>