Unibono YH-7269 Mens Body Hair Trimmer Kit User Manual

User Manual
YH-7269 2 in 1 Electric Grooming Kit

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING

PARTS IDENTIFICATION

1. YH-7269 Trimmer
2. T-Blade Guide Comb
3. Vertical Cutter Head
4. Blde Oil
5. Clean Brush
6. Vertical Blade Guide Comb
7. USB Charging Cable

PRODUCT FEATURES

Safety Replacement Heads
Special cutter head in R-shaped round corner protects the skin from scratching.
100% Waterproof
Safe to use in the shower, and easily cleaned under running water.
Replaceable Blades
T Blade and vertical balde, meets the needs of life.
Low Noise and Low Vibration
Low noise motor, quiet and comfortable.
With Guide Comb’s Help
Adjustable with 15 length guide combs for easy trimming of various lengths of hair。

CUTTER HEAD

T-Blade Cutter Head
Suitable for trimming hair and beard,close to zero gap trimming without guide comb. The shaver has strong power and will not get stuck during shaving.
Vertical Cutter Head
Suitable for trimming the hair of smooth parts, such as chest hair, neck hair, armpit hair, leg hair, etc. The special shape and structure make the trimming smoother and the angle more controllable.

HOW TO ASSEMBLY AND DISASSEMBLY

Assembly of T-Blade Cutter Head

1. Align the blade A with the slot B of the blade head, and press the back of the blade firmly until you hear a “click”.
2. Put the assembled cutter head connection C into the body slot D, and slide it down.

Assembly of Vertical Cutter Head

1. Align the blade A with the slot B of the blade head, and press the back of the blade firmly until you hear a “click”.
2. Put the assembled cutter head connection C into the body slot D, and slide it down.

Disassembly of Cutter Head

1. Pull the cutter head C away from the body B in the opposite direction.
2. Press the tooth part of the cutter head with your thumb and push it out in the direction indicated by the arrow to remove the cutter head.
3. To prevent the blade from falling and breaking, please hold the blade when disassembly.

GUIDE COMBS

By using the guide comb, you can trim the corresponding fixed length of hair, which can avoid overcut hair caused by your mistakes and effectively control the overall length.       Attach Adjustable Guide Comb
Align the guide comb with the slot on the edge of the cutter head, rotate the adjustment button to lock it.
Adjust Guide Comb
Twist the adjustment button to change the length of the guide comb.
Remove Guide Comb
Before installation and removal, the adjustment button must be rotated to the arrow and aligned with the arrow on the guide comb.
Note: Before remove the guide comb,it is necessary to adjust the comb to the maximum size.

CLEANING AND MAINTENANCE

1. After the blade is disassembled(refer to “how to assembly and disassembly”),use cleaning brush to remove the hair on the blade.
2. Please do not forcibly disassemble the cutter head, otherwise the cutter head may not be recovered and be scrapped.
3. After each use, please clean the broken hair in the cutter head so as not to affect the sharpness of the blade.
4. After cleaning with water, please dry it in time to prevent the spring in the cutter head from rusting. After each cleaning, please drop in lubricating oil for maintenance.

1. Drop a small amount of lubricating oil between blades as indicated in the picture.
2. Please use the oil that included in the package and do not use other oil.
Note:
The service life of the cutter head is related to the frequency of use, capillary and maintenance.
Replacing worn blades in time can avoid pulling hair during the timing process, and don’t use blades that other manufacturers can’t match. During use, there may be a slight fever, which is normal.

1. Use a cleaning brush to remove the broken hair in the installation slot of the blade head of the trimmer, which can be washed directly with water.
2. After cleaning, please dry the body with a dry cloth, then install the cutter head, and then store it in a dry place.

TRIMMING SKILLS

1. According to the hairstyle to be trimmed, choose a positioning comb with an appropriate length; the remaining length of the hair after trimming without a positioning comb is about 1mm.

Hold the trimmer so that the cutter head is facing up, let the flat surface of the comb cover lightly touch the trimmed part, and push forward against the direction of hair growth.
The hair can be cut short by running the trimmer slowly and smoothly through the area to be trimmed.

• If the clipper is reversed to trim the hair, it my over-cut or scratch the skin.
• The hair must be dried when trimming. it will increase the difficulty of the haircut and reduce the sharpness of the blade if the hair is wet.
• Do not press the blade hard on the skin during trimming, otherwise the skin may be injured.

1. Using T Blade cutter head and adjustable positioning comb can trim hair of multiple lengths, which is suitable for hair trimming;
2. Use vertical blade cutter head to remove body hair, suitable for trimming armpit hair, leg hair, etc
3. If you are using electric clippers for the first time, please install a guide comb to avoid the consequences of short and untidy hair.

CORD/CORDLESS USE

Tips：Please charge the trimmer before the first time using.

1. Insert the USB charging cable power interface into the body.
2. Confirm that the machine is turned off, and plug the USB charger into the power socket. (USB charging cable can be plugged into the socket with USB interface, such as mobile phone charger, computer, mobile power, etc.)

CORD/CORDLESS USE

1. Do not wipe the trimmer with gasoline, alcohol, banana oil or other oily corrosive chemicals.
2. Do not disassemble or repair this product without authorization.
3. Do not plug in the power when your hands are wet, otherwise there may be power leakage.
4. Do not damage the power cable by pulling hard, otherwise it may cause power leakage, short circut or fires.
5. Use close supervision when the appliance is used by children and people with disabilities.
6. Use the appliance only for the purposes described in this manual.
7. Use only attachments recommended by the manufacturer.
8. Do not operate the appliance if it is not working properly or is damaged,as this may cause injury.
9. Do not charge at temperatures above 40°C or below 0°C, as this will reduce battery capacity and shorten its lifespan.
10. Please unplug the charger in time after the appliance is fully charged, otherwise it may shorten the life of the battery.
11. This product may heat up during use and charging, this is normal.
12. The service life of the cutter head is related to the service frequency, hair quality and maintenance.please replace the worn blade in time to avoid pulling the hair.

LIMITED ONE-YEAR WARRANTY

Unibono will repair or replace your appliance (at our option) free of charge within 12 months from the date of purchase if the appliance is defective in workmanship or materials.
For more information, please refer to the after-sales card.

SAVE THIS MANUAL FOR FUTURE REFERENCE
for more information or Product Registration,
visit unibonoshop.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>