Unibono YH-3301 3-in-1 Electric Razor for Women User Manual

Unibono YH-3301 3-in-1 Electric Razor for Women

PRODUCT SPECIFICATION

• Name: 3-IN-1 LADY SHAVER
• Model no.: YH-3301
• Battery capacity: 600mAh Lithium Battery
• Input: 5V/1A
• Charging Time: Approx. 120 minutes
• Running Time: Approx. 60 minutes
• Dimension:
  • 6.6 x 2.1 x 2 inch 4.8 oz. (Standard shaver)
  • 6.5 x 1 .6 x 1.5 inch 4.2 oz. (Mini shaver)
  • 6.5 x 1.6 x 1.5 inch 4.2 oz. (Detail trimmer)

PRODUCT CONFIGURATION

1. Detachable shaver
2. Shaver protective cap
3. Mini shaver
4. Mini shaver cap
5. Bikini trimmer head
6. 3mm Bikini trimmer comb
7. Storage bag
8. Lubricating Oil
9. USB cable
10. On/Off Switch
11. Cleaning brush
12. Charging port

TECHNICAL HIGHLIGHTS

• Safe Detachable Head. Special cutter head in R-shaped round corner protects your skin from scratching.
• 100% Whole Body Waterproof. Safe to use in the shower and easy to clean under running water.
• A Variety Of Replaceable Cutter Heads. There are three different cutter heads which meet the grooming requirements of different body parts.
• Low Noise And Less Vibration. Motor works in low noise make a quiet hair removal.
• Soft Glue Material And Ergonomic Design. It is comfortable to hold the shaver or trimmer to cut your body hair.
• Built-in LED Lighting.The thoughtful lighting makes the shaving/trimming clearer and safer.

INSTALLATION

HOW TO INSTALL AND REMOVE BLADE HEAD

• Align the blade connection A into the main body slot B.
• Press down firmly on the back of the cutter until a soft sound.
• To remove blade head.hold the shaver with front of blade facing away.push the blade head cartridge out.

HOW TO INSTALL AND REMOVE GUIDE COMB
Trimming with guide comb can achieve desired hair length.

• Guide comb should be aligned into the one side slot of the trimmer then the other side after a click
• Push one side of the guide comb off the slot of trimmer then the other side to pull the comb off.

Note: Turn off the shaver before installing and removing.

CLEANING AND MAINTENANCE

HOW TO CLEAN AND MAINTAIN BLADE HEAD

• Gently remove the blade cover of the shaver.
• Wipe off the accumulated hair with cleaning brush from these three cutter.
• Rinse the cutter heads with running water.
• Oil the blades in the circled position as indicated.

HOW TO CLEAN AND MAINTAIN THE MAIN BODY

• Wipe off the hair scraps in the head slots of the main body.
• Rinse the main body with running water.
• Ensure a thoroughly wiped dry after cleaning the body.

MAINTENANCE CAUTION

Make sure the shaver is off before cleaning and maintenance

• Wipe the shaver with wet cloths or neutral soap lotion, dry and install it well after every use.
• Do not remove the spring of the blade in case of a fit error or scrap.
• It is recommended to oil the blades after every cleaning.
• Do not immerse shaver in water or other liquids.
• Do not wipe the body with gasoline, alcohol, banana oil or harsh corrosive chemicals.
• The life of the blade is related to use frequency, hair quality and maintenance. Timely replacement of worn blade can effectively avoid clipping hair; If replace, please consult our after-sales service team directly for the original blade accessories.
• It may be slightly hot when the blades or shaver heads work.it is normal.

Warning: The white ceramic blade is easily broken, please handle with care in the operation.

HOW TO SHAVE

• This 3-IN-1 electric shaver is suitable for arms, legs, under-arms, bikini area etc.
• Use the trimmer to cut hair short then use the flexible foils for a closer shave.
• Trimming with guide comb can achieve desired hair length, also good for edge and shape.
• We advise you to apply a mild and alcohol-free moisturizing cream after shaving.

Shaving Long Hair

• Remove the foil shaver protective cap.
• Turn the shaver on.
• Hold the shaver with the side trimming blade slightly tilted (approximately at a 45° angle), move the shaver against the direction of the hair growth.
• After trimming, move the foils over the same area for a smooth, closer shave.

Trimming And shaping

• Attach the trimming head and turn it on.
• Hold the trimmer approximately at 45° angle to your skin.
• Move the trimmer slowly against the direction of the hair growth.
• Attach the guide comb with the trimmer for your desire length or shape.

Dry and wet shaving

• This 3-IN-1 lady shaver is designed to be used both wet and dry.
• For dry shave please make sure skin is clean and completely dry before use.
• For wet shave it is good to lather your skin with soap or shaving cream.

Note:

• Dry the hair when trimming, if the hair is too wet, it may effect the cut performance and the sharpness of the blade.
• Please do not use any deodorants or alcohol-based lotions immediately before or after the shave.

WHERE TO SHAVE

• Use the shaving head to trim arms. underarms, legs, back etc.
• Use the mini shaving head for precision shaving with greater maneuverability or small areas of your body such as the bikini area and underarms.
• Use the bikini trimmer head to trim the hard-to-reach area in the bikini zone.
• For better effect, trim your bikini area when your skin and the appliance are dry.

HOW TO CHARGE

Shaver must be turned off before Charging. Make sure the current is 1A before charging the 5V charger.

• Insert the charging cable into the rear port of the shaver.
• Plug into power through USB adapter or power bank, computer etc.
• Switch off and charge the shaver fully before its first use.
• Two hours fully charge provides 60 minutes of use.

WARNING

• Supervision is necessary if this shaver is used by children or persons with disabilities.
• Use this shaver only for its intended use as described in this manual.
• Do not use attachments not recommended by the manufacturer.
• Do not operate this shaver if it is not working properly or damaged in case of injury.
• Do not disassemble this shaver by yourself.
• Do not charge at temperatures above 40°C or below 0°C, as this will reduce battery capacity and shorten its lifespan.
• Please unplug the charger in time after fully charge to lengthen the battery’s life.
• This shaver may heat up during use and charging, this is normal.
• Never operate this shaver with a damaged cord or plug.
• Keep the shaver away from wet area.
• Do not expose this shaver directly to the sun.
• Follow the regulations of your country/region regarding recycling of electrical or electronic products and batteries.

TROUBLESHOOTING

If the blades of your lady shaver are not removing your body hair properly, please read on the below advice on how to troubleshoot this problem to achieve a smooth shave.

Shaver cutters do not move:

• The cutting unit may be dirty and clogged. Clean it as directed in Cleaning section.
• Always clean and oil the shaver and trimmer head before store.

Shaver does not hold charge:

• Fully discharge battery by running shaver until it stops then follow charging instructions.
• Make sure the current is 1A before charging the 5V charger.
• Charge the shaver fully before its first use.
• Shaver must be charged for a full 2 hours.

Shaver pulls your hair:

• It may be low power. Try to charge fully.
• Oil the blade evenly before hair cut.

Can’t remove guide comb:

• Do not separate the guide comb from trimming head forcefully, remove the guide comb as the user manual indicates, then pull the comb off.

Not shaving properly

• It is very important to use proper shaving technique to achieve desired results.
• We suggest pulling your skin tight with one hand and slowly moving the shaver along the skin.

Skin irritation

• Using shaver on very sensitive skin may cause a little bit of irritation,don’t worry it will disappears very quickly. If the irritation lasts longer than 3 days, we advise you to consult a doctor.
• Using shaver on dirty or oily skin may cause irritation.make sure your skin is clean, entirely dry and free from grease before shaving.
• Using shaver incorrectly may cause skin irritation. Make sure that you move the lady shave in the right direction (against the direction of hair growth) and that you hold it at the right angle.
• The shaving head or trimmer head should be in full contact with the skin. Do not press the appliance too firmly on your skin, be gentle.

Shaving head is broken or damaged

• A broken or damaged shaving head can be harmful to your skin.
• Please check if any part of the shaving head (or trimming head, if available) is broken or damaged.

Limited One Year Warranty

Unibono will repair or replace shaver (at our option) free of charge within 12 months from the date of purchase if the clipper is defective in workmanship or materials. For more information, please refer to the after-sales card.

Warranty excludes:

• The blades are not included in the limited one year warranty. This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product.
• Servicing by unauthorized persons.
• Use with unauthorized accessories.
• Connecting it to incorrect current and voltage.
• Wrapping cord around appliance causing premature wear and breakage.
• Any other conditions beyond our control.

No responsibility, obligation, or liability is assumed for the installation or maintenance of this product.

Manufacturer: Ningbo Unibono Appliance Co., Ltd
Address: 29 Xinyi Rd, Daxie Dvpt,Beilun, Ningbo,Zhejiang,China 315812
Tel: 008675527225145
E-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>