Principal LED Street Wrap Flex Pod Installation Guide

Principal LED Street Wrap Flex Pod

CUTTING AND CONNECTION

Installation Tools

1. Silicone Insert

2. Silicone End Cap

3. Silicone Glue

4. Pipe Cutter

Instructions for Cutting and Connection

1. Cut on the designated cut mark.
   

2. Clean cut end before next steps.
   

3. Install silicone insert after cut.
   

4. Apply silicone glue to silicone end cap, making sure that the cut section is completely sealed.
   

Install Instructions

Mounting Accessories

1. 3.28 ft. aluminum extrusion
   

2. Back Bend Flexible Chain
   

Notes: There are no pre-drilled holes in the aluminum extrusion, please drill holes  ccordingly to meet field requirements, using the appropriate screw.

Installation and Warning

Flex Pod only bends as shown above.

For specs visit: P-LED.com/product/families/street-wrap- flex

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>