GLOBO LIGHTING 48917-24RGB TINI Ceiling Light Instruction Manual
- June 15, 2024
- GLOBO LIGHTING
Table of Contents
GLOBO LIGHTING 48917-24RGB TINI Ceiling Light
Product Information
Specifications
- Model : 48917-24RGB
- Light Source : LED
- Color Temperature: 6000K, 4000K, 2700K
- Maximum Length: 5m
- Power: 24W LED, 36V, 3W RGB LED
- Input Voltage : 220-240V~, 50/60Hz
Product Usage Instructions
Installation
To install the product, follow these steps
- Ensure that the power is turned off before installation.
- Select the desired location for installation.
- Clean the surface where the product will be installed.
- Peel off the adhesive backing from the product.
- Stick the product firmly to the desired surface.
- Connect the product to a power source.
- Turn on the power and test the product.
Changing Color Temperature
The product offers three different color temperatures: 6000K, 4000K, and
2700K. To change the color temperature, follow these steps
- Ensure that the power is turned off.
- Locate the color temperature switch on the product.
- Use a small tool to slide the switch to the desired color temperature.
- Turn on the power to activate the new color temperature.
Using Night Light Mode
The product also features a night light mode. To use the night light mode,
follow these steps
- Ensure that the power is turned on.
- Locate the night light switch on the product.
- Toggle the switch to activate the night light mode.
- The product will emit a soft, dim light suitable for nighttime use.
Cleaning and Maintenance
To clean and maintain the product, follow these guidelines:
- Ensure that the power is turned off before cleaning.
- Use a soft, damp cloth to wipe the product’s surface.
- Avoid using harsh chemicals or abrasive materials that may damage the product.
- Regularly inspect the product for any signs of damage or wear.
- If any issues are found, contact customer support for assistance.
Frequently Asked Questions (FAQ)
-
Q: Can I replace the LED light source?
A: No, the LED light source in this product is not replaceable due to its design. -
Q: Can I replace the control gear or driver unit?
A: No, the control gear or driver unit cannot be replaced.
Assembely
Instruction
Light Source
Light source
The light source is not interchangeable because it is determined by the
surrounding product design. This product contains a light source of energy
efficiency class
The control gear cannot be replaced.
The LED – light source cannot be replaced.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>