Interpet Aqua Cube Glass Fish Tank Aquarium Instructions
- June 15, 2024
- Interpet
Table of Contents
Interpet Aqua Cube Glass Fish Tank Aquarium
Product Information
Specifications
- Product: LED Aquarium Light
- Model: [Insert Model Number]
- Manufacturer: Interpet Ltd.
- Contact Information:
- Consumer Advice Department
- Vincent Lane, Dorking, Surrey RH4 3YX
- Fax: 01306 876712
- Email: customercare@interpet.co.uk
Product Usage Instructions
Step 1: Unpacking and Placement
- Remove the LED unit from its packaging.
- Place the LED unit onto the top of the aquarium.
- Ensure that the LED unit is centrally located.
- The LED unit should be positioned in a way that allows the two slide flaps to be hinged on either side, as shown in the line drawing below.
Step 2: Power Connection
- Locate the power cord attached to the LED unit.
- Plug the power cord into a suitable power outlet.
- Ensure that the power outlet is compatible with the voltage requirements specified in the product manual.
Step 3: Adjusting Light Settings
The LED Aquarium Light offers different light settings to suit your needs. To adjust the light settings, follow these steps:
- Locate the control buttons on the LED unit.
- Press the “Power” button to turn on the light.
- Use the “+” and “-” buttons to increase or decrease the brightness level.
- Press the “Mode” button to cycle through different lighting modes, such as daylight, moonlight, and custom colours.
- Refer to the product manual for specific instructions on customizing colours or setting timers, if applicable.
Frequently Asked Questions (FAQ)
- Q: How do I clean the LED unit?
- A: Before cleaning the LED unit, always disconnect it from the power outlet. Use a soft, damp cloth to wipe the surface of the LED unit. Avoid using harsh chemicals or abrasive materials that may damage the product.
- Q: Can I use the LED Aquarium Light for saltwater tanks?
- A: Yes, the LED Aquarium Light is suitable for both freshwater and saltwater tanks. However, please ensure that the light unit is properly sealed and protected from saltwater splashes to prevent any damage.
- Q: What should I do if the LED unit malfunctions?
- A: If you experience any issues with the LED unit, please refer to the troubleshooting section in the product manual. If the problem persists, please contact our Consumer Advice Department for further assistance using the provided contact details.
- Q: How can I dispose of non-working electrical equipment?
- A: To protect the environment and comply with local regulations, please hand in non-working electrical equipment, including the LED Aquarium Light, to an appropriate waste disposal centre. For more information, you can contact our Consumer Advice Department using the provided contact details.
How to install your LED light
- The power supply/transformer is not waterproof – this must be mounted such that it cannot fall into the aquarium or be splashed by water. The cable must be installed with a drip loop to prevent any water running down the cable into the plug socket.
- Unpack and place the LED unit onto the top of the aquarium; centrally locate it so the two slide flaps can be hinged on either side as per the line drawing below;
Maintenance
- Switch the LED off and remove from the aquarium – wipe off any dirt, and salt mineral deposits with a damp cloth.
- Do not use cleaning agents that could enter the aquarium and harm your livestock.
Important information
- This unit is for indoor use only – do not use outside.
- Do not use this unit if the cable or transformer plug is damaged or appears to be malfunctioning.
- Do not use this unit if the transformer plug gets wet.
- Dispose of responsibly following instructions from your local authority.
Guarantee
This product is guaranteed against defects in material and workmanship for 12
months from the date of purchase, under normal usage.
The GUARANTEE DOES NOT APPLY in case of improper use, negligence, lack of
maintenance or accidental damage. If the LED fails due to a manufacturing
fault within this period it will either be replaced free of charge or
repaired. Liability is limited to the replacement of the faulty product only
no other costs will be reimbursed. This guarantee is not transferable and does
not affect your statutory rights. This guarantee does not confer any rights
other than those expressly set out above. Never place polystyrene under the
bottom frame. Your aquarium must be sited on a surface that is flat and level
and able to withstand the weight of the aquarium when filled with water,
gravel etc. Note: 1 litre of water weighs 1kg. Wrought iron and angle iron
stands, together with video, Hifi, TV cabinets, articles of furniture and
self-assembly furniture are NOT suitable for use with Aqua Cube LED aquariums,
doing so will automatically invalidate this guarantee. You must use the
correct Interpet stand so as not to invalidate your guarantee. All
aquarium/stand locations should take into account the position of
floorboards/joists etc., bearing in mind the weight to be supported. The
sealant on the aquarium must not come into contact with any chemicals (i.e.
Household bleach etc.) or sharp objects such as rocks and razor edged algae
scrapers. Normal aquarium treatments and fish medications used for fishkeeping
do not affect the aquarium silicone.
IMPORTANT SAFETY ADVICE: Never site your aquarium over electrical
appliances and never lift the aquarium by the top
frame (if fitted) or by any part of the bracing system.
DO NOT try to lift or move the aquarium when it contains water.
This guarantee covers leakages arising from either faulty materials or
workmanship. We cannot be responsible for breakages of glass. This guarantee
does not apply to any unauthorized or misuse, improper or inadequate
maintenance, or operations outside the product specifications. In case of a
defect within the stated guarantee period, the products should be returned,
with proof of purchase, to the point of purchase.
This guarantee does not affect your statutory rights. Guarantee service
includes repair or replacement of the aquarium or LED unit at Internet Ltd.’s
discretion. Neither Interpet nor the manufacturer are liable for any direct,
indirect, special, incidental or consequential damages, including loss of
livestock, arising from a defect in this product.
You can help protect the environment. Please remember to respect the local
regulations: hand in non-working electrical equipment to an appropriate waste
disposal centre.
CONTACT
- Consumer Advice contact details
- Interpet Ltd.
- Consumer Advice Department
- Vincent Lane, Dorking, Surrey RH4 3YX
- Fax: 01306 876712 E-mail: customercare@interpet.co.uk.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>