SENCOR Scooter TWO LONG RANGE 2021 User Manual

June 6, 2024
SENCOR

SENCOR LOGO Electric scooter
Scooter TWO LONG RANGE 2021
USER’S MANUAL

Contents of the package and scooter description

Supply content

1x Electric scooter SCOOTER TWO LONG RANGE 2021
1x Charging adapter
1x Hex key set
4x Handlebar fastening screw
1x User’s manual

SCOOTER TWO LONG RANGE 2021 description

SENCOR Scooter TWO LONG RANGE 2021

1. Speed control
2. LED light
3.  Mechanical brake and bell
4.  Folding mechanism release lever
5.  Electric motor / front electric brake
6.  Power on/off/control panel
7.  Transport mode lock hook| 8.  Charging connector
9. Stand
10. Battery compartment
11. Rear swingarm
12. Notch to retain the handlebar in folded mode
13. The rear LED light/brake light
14. Mechanical disc brake
---|---

Operation

Control panel and application

SENCOR Scooter TWO LONG RANGE 2021- Operation| ➊ Bluetooth connected device indicator
➋ STANDARD (green indication), SPORT (red indication) mode selected
➌ Flashlight on
➍ Current speed
➎ Battery level
➏ Multifunction button
---|---

While using your SCOOTER TWO LONG RANGE 2021, you can also use the “SENCOR SCOOTER” mobile app available for download at Google Play and Apple APP Store.
This app offers users for example number of kilometers ridden, the cruise control setting function, and many others.
For more information about the app / user’s manual, please refer to www.sencor.cz website.

Multifunction button

CAUTION:
The adjustment of riding properties should always be performed before starting the ride.

  1. Short press the multifunction button while the power is off to turn the SCOOTER TWO LONG RANGE 2021 on.
  2.  Hold down the multifunction button for 2 seconds while the power is on to turn the SCOOTER TWO LONG RANGE 2021 off.
  3.  Short press the multifunction button while the power is on to turn on the LED fl ashlight.
  4.  Double-tap the multifunction button while the power is on to switch the mode between STANDARD/SPORT.

Assembling the SCOOTER TWO LONG RANGE 2021

  1. Unfold the handlebar rod and secure it fi only with the lock lever.SENCOR Scooter TWO LONG RANGE 2021- Assembling

  2. Make sure that the control unit connectors are connected to the control panel.
    The connector with the cords must be connected properly to avoid losing later on.SENCOR Scooter TWO LONG RANGE 2021- control panel

  3. Carefully connect the handlebar with the handlebar tube. Take care to avoid damage to the connecting wire while it’s being inserted into the steering tube. The LED fl ashlight must point in the ride direction.

  4.  Screw the handlebar and the handlebar tube together. Insert two hex screws from the front and two hex screws from the opposite side as shown. Tighten the screws fi rmly. Regularly check if the screws don’t get loose while using the product.SENCOR Scooter TWO LONG RANGE 2021- Carefully connect

  5. Turn on the SCOOTER TWO LONG RANGE 2021

Charging

Check if the battery is fully charged before starting your ride. Turn on the control panel and check the battery level.
The charging is performed with the supplied charging adapter. First, remove the rubber cap of the charging connector in the SCOOTER TWO LONG RANGE 2021 and connect the charging adapter. Then connect the adapter to your power outlet. When the charging process is fi nished and the charging adapter is disconnected, cover the charging connector opening again with the rubber cap. Regularly check if the protective cap covers the charging connector whenever the charging does not take place.

SENCOR Scooter TWO LONG RANGE 2021- ChargingThe charging indicator is located on the charging adapter and shows 2 statuses as follows:

  1. Red LED: Indicates the battery charging process
  2. Green LED: Indicates the battery is fully charged

CAUTION:
For charging, use only the original accessories supplied with the appliance. When the battery operating time becomes very short, the battery life has been used up; we recommend that you have the battery replaced at your authorized center.

Recommendation:
If the unit is not to be used for an extended period of time, we recommend fully charging the battery once every two to three months. We do not recommend storing the unit with a fl at the battery to prevent irreparable damage to the battery (loss of capacity).

Protecting the battery against excessive discharging

The electric scooter is equipped with the protection of each component against damage due to operational overload and lower battery charging level.

  1. If the scooter is subject to a higher load for example due to frequent riding uphill or riding up a steep hill, the control unit/battery overheating protection will be enabled, limiting the power for a necessary period of time. The speed will be reduced to a maximum of 15km/h.
  2.  If the battery level drops below 30%, the maximum scooter speed will be limited to 15km/h. If the battery level drops below 25%, the maximum speed will be limited to 10km/h.

CAUTION:
Do not repair and/or tamper with the electric scooter (SCOOTER TWO LONG RANGE 2021) protection mechanisms. This will prevent damage to the individual components of the electric scooter (SCOOTER TWO LONG RANGE 2021).

 Folding and transport

  1.  The scooter must be turned off. Hold the scooter, unlock the folding mechanism release lever at the bottom of the handlebar tube and push the released level in the ride direction.SENCOR Scooter TWO LONG RANGE 2021- transport
  2. Fold the released handlebar tube towards the rear mudguard and lock it using the hook on the handlebar and notch on the rear mudguard. Correct transport mode folding
  3. To carry the scooter, hold the SCOOTER TWO LONG RANGE 2021’s handlebar tube. For more convenient transport, we recommend holding the handlebar tube in one-third of its length on the side near the front wheel.SENCOR Scooter TWO LONG RANGE 2021- front wheel

 Steering the SCOOTER TWO LONG RANGE 2021

CAUTION:

  • Before each ride, use a helmet and protectors to prevent injury in case of falling.
  • Before each ride, please check if the mechanical brake is fully functional.
  1. Place one foot on the scooter tread and gently bounce off the ground with the other foot.SENCOR Scooter TWO LONG RANGE 2021- ground with the

  2. Once the scooter is in motion, press the speed control lever to start the motor.
    As soon as the scooter starts on its own, place the other foot on the scooter surface.
    Note:
    Motor starting and speed control of your electric scooter can be performed when 5km/h speed is reached.SENCOR Scooter TWO LONG RANGE 2021- speed is
reached

  3. Stopping is essential for safe driving. First, release the speed control and then push the mechanical hand brake on the left side of the handlebar.

  4.  Try the fi first turns on a fl at the surface and at slow speed. To turn, move your center of gravity slightly by tilting gently to the desired direction of travel and slowly turning the handlebars.

 Safety instructions

This electric SCOOTER TWO LONG RANGE 2021 is designed for entertainment and recreational use. This is not a means of transport. Observe the safety of everyone in both private and public areas, follow the instructions below as well as local traffi c regulations.
When meeting pedestrians, pay close attention to your ride and make sure pedestrians are aware of your presence. If you are outside their
the angle of view, ring the bell,  low down, and overtake (overtake from the left in case of right-hand traffic).
Higher driving speed means automatically a longer braking path. Keep safe speed in case of an unexpected need to stop and keep a safe distance from others.  Even on flat at the surface, you may encounter situations or terrain that cause you to lose balance, skidor other unexpected situations that can cause you to fall.  Always pay close attention to driving. Check the mechanical brake, battery charge status, wear of components, and wheels before each ride. In case of loose parts or unusual noises, carry out a thorough check and contact an authorized service center if necessary.

Neither the manufacturer nor the distributor is liable for any lat nancial damages, injuries, accidents, legal disputes, or conflicts resulting from non- observance of the safety instructions.

  • Do not drive in the rain and avoid slippery surfaces.

  • If you encounter an obstacle on your way, stop and carry the scooter over the obstacle.

  • Exercise caution when passing through low-ceilinged areas.

  • Do not accelerate downhill and always brake well in advance.
    If you encounter a steep descent (e.g. a steep hill), stop and guide your scooter.

  • Do not add speed while pushing the scooter.

  • Always avoid obstacles.

  • Avoid carrying heavy luggage on the handlebar.

  • Always keep both feet on the scooter tread while riding.

  • Operate SCOOTER TWO LONG RANGE 2021 in designated driving areas. Observe the local regulations of the regions, parks, cities, and states where you want to operate the scooter.

  • Do not turn sharply at high speeds.

  • Do not ride through puddles, water, or in rain.

  • Do not ride with another person even in the case of children.

  • Do not step on the mudguards.

  • Do not touch the brake components.

  • Always hold on to the handlebar.

  • Do not try to ride up the stairs, down the stairs, or jump with your scooter.

Maintenance and adjustment

The brake mechanism must be adjusted before the fi rst ride. Contact a specialized provider (e.g. a bike service) for proper adjustment. Adjustments cannot be made under warranty or post-warranty service at the manufacturer or distributor.
If the brakes are too tight or too loose, use a 4mm hex key and loosen the brake screw anticlockwise to adjust the brake cable length. Then tighten the screw fi rmly.
To fine tune, adjust the brake cable tension by turning the nut on the mechanical brake attached to the handlebar.

SENCOR Scooter TWO LONG RANGE 2021- Maintenance and
adjustment

In the transport mode, there is a screw (4mm Allen) accessible in the handlebar tube joint to tighten its fastening. Before tightening the hex screw in the handlebar tube joint, the hex screws in the joint socket must be loosened first as shown by the arrows on the figure.

SENCOR Scooter TWO LONG RANGE 2021- rows on the fi
gure

Technical specifications

SCOOTER TWO LONG-RANGE 2021

Key features
Maximum speed up to 25km/h
Travel range up to 45km
Rear-wheel suspension
Aluminum framework
SENCOR SCOOTER app available at Google Play and APP Store
LED lighting
LED display (mode, speed, battery, lighting, Bluetooth)
Drive
Engine power| 400W
Speed| SPORT mode up to 25km/h
STANDARD mode up to 20km/h
Range| up to 45km (a 55kg weight
up to 37km fd 90kg weight
Cruise control| Yes
Maximum climb angle| up to 15°
10-inch front and rear perforated tires
Dual braking system – electrical and mechanical
Disc brake
SENCOR SCOOTER app
Available at Apple App Store and Google Play
Using application security lock
Range, distance ridden, running time, speed, battery level, etc.
Bluetooth 4.1
Technical specifications|
Maximum load| 120kg
Dimensions| 112 x44 x 118cm (unfolded)
112 x44 x 51cm (folded)
Weight:| 16kg
Working temperature| 0 to 40°C
Storage temperature| 0 to 45°C
Adapter
Input voltage| 100-240V AC 50/60 Hz
Input current| 2A
Output voltage| 42V
Connector| 0 5.5 x 10mm
Battery|
---|---
Capacity| 15Ah Li-ion
Charging time| max. 9 hours
Number of cells| 50
Protection against| short-circuit, overvoltage, overcharging, overheating
Battery protection against| excessive discharge
Input charging voltage| 42V
Rated voltage| 37V

Charging adapter Value and accuracy Unit
Manufacturer’s name or trademark, company ID, and address MN XIN YU POWER (SH

ENZH EN) SUPPLY CO.. LTD
XVE
No.38, yuanxin road, tongue Longgang area, Shenzhen, Guandong
914403003601080704W| –
Model identification code| XVE083-4200200| –
Input voltage| AC 110-240| V
Input frequency| 50/60″| Hz
Output voltage| DC 42.0| V
Output current| 2.0| A
Output power| 84.0| W
Avenge efficiency in active mode| 86| 86
Efficiency at low load (10%)| 85.7| 86.
No-load power consumption| 0.18| W

Bluetooth

Version| 4.1
Maximum Transmitter Power| 100mW @ 2.4GHz – 2.4835GHz

INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING MATERIALS
Take the packaging material to a designated municipal waste facility.

DISPOSING OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used electric or electronic products must not be added to standard municipal waste. For proper disposal and recycling, take these products to designated collection points. Or in some European Union states or other European countries, the products can be returned to the local retailer when buying an equivalent new product. Correct disposal of this product helps save valuable natural resources and prevents damage to the environment caused by improper waste disposal. Ask your local authorities or collection facility for more details. In accordance with national regulations penalties may be imposed for the incorrect disposal of this type of waste.

For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your retailer or supplier for the necessary information.

Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from the local council or from your retailer.
FAST ČR, a.s. hereby declares that the radio device type SCOOTER TWO LONG RANGE 2021 conforms to the 2014/53/EU directive.
Changes in the text, design and technical specifications may be made without prior notice and we reserve the right to make such changes.

SENCOR Scooter TWO LONG RANGE 2021- LOGO

EU DECLARATION OF CONFORMITY

Product/brand: ELECTRIC SCOOTER / SENCOR

Type/model: SCOOTER TWO LONG RANGE 2021 as factory model E9 MAX
DC 37,0V (Li-ion battery 15Ah), IPX4, Class III
Adapter Input AC 100-240; 50/60 Hz; 2,0A; Class II; IP20 Output DC 42,0V; 2,0A; 84,0W

Manufacturer: FAST CR, a.s.

Cernokostelecka 2111, 100 00 Praha 10, Czech Republic VAT no: CZ26726548

The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

Directive MD 2006/42/EC Directive LVD 2014/35/EU
Directive RED 2014/53/EU Directive EMC 2014/30/EU
Directive Noise 2000/14/EC Directive RoHS 2011/65/EU

The relevant harmonized standards and the other technical specifications:

EN 60335-1:2012+AC+A11 EN 60950-1: 2006+A11+A1+A12+A2
EN 62233:2008 EN IEC 61000-6-1:2019
EN 55014-1:2017 EN 61000-6-3:2007+A1+AC
EN 55014-2:2015 EN 14619:2015
EN IEC 61000-3-2:2019 EN ISO 12100:2010
EN 61000-3-3:2013+A1 EN 60204-1:2006+A1+AC
EN 62479:2010 EN 300 328 V2.1.1
EN 301 489-1 V2.2.0 EN 301 489-17 V3.2.0

Place of issuance: Prague
Date of issuance: 11.1.2021
Name: Ing. Zdenek Pech Chairman of the Board
Signature:

SENCOR Scooter TWO LONG RANGE 2021- SIGNETURE

Documents / Resources

| SENCOR Scooter TWO LONG RANGE 2021 [pdf] User Manual
SENCOR, Electric scooter, Scooter, TWO, LONG, RANGE, 2021
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals