RIFORASE XTM0001 Phone Holder Car Instruction Manual
- June 15, 2024
- RIFORASE
Table of Contents
RIFORASE XTM0001 Phone Holder Car
Please read this manual carefully before using the product and keep it properly.
Thank you for purchasing this product
To provide you with a better user experience, please read this manual
carefully.
Product Parameter
The above parameters are measured manually, 3-5mm error is normal.
Product Description
- Clamp Arm
- Non-slip Silicone
- Foot Support
- Clamp Arm Switch
- Telescopic Adjustment Knob
- 220°Flip Button
- Pressure Valve
- Silicone Base Suction Cup
Dashboard Or Windshield Phone Mount
- Remove the nut from the phone holder.
- Put the connecting ball through the nut.
- Push the connecting ball into the round hole on the back of the phone holder
- Tighten the nut on the phone holder
Remove the protective film from the silicone base.
- Press the base of the car mount to make the suction cup stick to the dashboard or windshield.
- Press the Pressure Valve to firmly lock the suction cup on the dashboard/windshield
NOTE
Pressing the Pressure Valve of the suction cup is the last step, do not
reverse the sequence of steps 2.2 and 2.3 Adjust the car mount angle to fit
the line of sight, and the installation is complete.
Announcements
- Do not pull the clamp arm violently, otherwise it will damage the internal structure of the product.
- Before sticking the silicone base suction cup on the dashboard or windshield, you need to make sure that the sticking position is clean.
- install the car mount before driving according to your needs. It is forbidden to operate and adjust the car mount when driving.
- If the silicone suction cup becomes dusty, you can wash it with water and then let it dry naturally to restore its viscosity.
About the dashboard pad
- The dashboard pad is a backup option. Only use it if the suction cup cannot attach to the dashboard surface closely and completely.
- Make sure the surface is flat and large enough for the adhesive to attach completely.
- This dashboard pad is designed for one-time use only. Once it is installed, do not try to remove it or reuse it.
- The adhesive is too strong and it will be difficult to move it. It is important to select the placement position before use.
- If you want to remove the car mount from the dashboard pad, turn on the switch of the suction cup on the car mount, release the suction of the suction cup, and then slowly remove the suction cup from the dashboard pad.
- If you remove it too quickly, you may damage the dashboard pad or other equipment.
- The dashboard pad cannot be used on the windshield.
Air Vent Car Phone Mount
- Slide the ball of the vent clip into the nut, then slide the ball into the groove on the back of the phone holder.
- Then tighten the nut clockwise.
- Rotate the top cap of the air vent clip to open the clamp, then put the clamp into the car air vent blade, and rotate the top cap to lock.
FAQs
How to use the dashboard pad ?
The dashboard pad is spare, you can use it or not. If use, you had better press it on the dashboard for 15s and wait for 24h to use.
Whether car mount can be used on all materials surfaces?
We do not recommend it for soft/curved/leather /wood/plush fabrics/filmed glass surfaces. ln such case, please install it on the windshield or air vent instead.
Warranty and after-sales policy
We offer 24 month’s warranty and 7/24 after-service for our customers, we give priority to the purchasing expericence of our customers, and if you have any issues with our product and services, please contact us, we are alway here for you!