KARUIKEV KRK-30D Home Safe Box Fireproof Waterproof Instruction Manual

KARUIKEV KRK-30D Home Safe Box Fireproof Waterproof

SKU: KRK-30D Instruction Manual

NOTICE

1. Do not lock the emergency key or emergency battery box into your safe.
2. If the safe box is not used for a long time,the battery should be removed to prevent leakage of liquid from damaging in the electronic system.
3. Purchase 4 AA batteries in advance,this safe does not contain batteries.
4. Factory default password:123456

BOX CONTENTS

1. Knob
2. Emergency Keyhole
3. Correct Indicator Light
4. Error Indicator Light
5. Confirm Button
6. Emergency Power Jack
7. Battery Compartment
8. Bolts
9. LED Light
10. Setting Button
11. Instruction Manual
12. Emergency Keys*2
13. Expansion Screws*2
14. Foot Mats*4

NOTICE: Please don’t put the emergency keys and the emergency battery box inside the safe.

Step 1:Open The Safe For The First Time

1. Expose the emergency keyhole by pressing the right side of the emergency key cover.
2. Insert the emergency key and turn it counterclockwise,then rotate the knob clockwise to open the door.

Step 2:Install Battery

1. After first opening, prepare 4 brand-new AA 1.5 Volt alkaline batteries (not included).
2. Remove the internal battery case cover and install the 4 AA batteries by matching the +& – electrode.

NOTICE:

1. Rechargeable battery is not recommended as it may destroy the internal electronic components of your safe.
2. Please use brand-new batteries, do not mix used batteries with new batteries.

Step3: Set Up The Code
The user can set two independent codes for the safe box.

1. Registered The First Password:
2. Step ①：Open the safe and keep the safe opening
3. Step ②：Press setting button(on the inner side of the door) for 1 second (Quickly press,do not press for a long time),buzzer “beep” will sound and Correct indicator on. Step ③：Input new code(3-12digits) and press the “#” button to confirm.
4. Registered The Second Password:
5. Step ①：Open the safe and keep it opening
6. Step ②：Press “#” to wake up the screen
7. Step ③：Press“0”twice
8. Step ④：Press setting button(on the inner side of the door) for 1 second(Quickly press,do not press for a long time),buzzer “beep” will sound and Correct indicator on. Step ⑤：Input new code(3-12digits) and press the “#” button to confirm.

THREE WAYS TO OPEN THE DOOR

1. The first way to open: Use the emergency key—Insert the emergency key into the right keyhole turned counterclockwise to the limit, then rotate the knob clockwise to open the safe (Suitable for the first opening, forgot code, or weak battery).
2. The second way to open: Use the code (Suitable for quick access and daily use).
3. The third way to open: Use the emergency battery box + code (Suitable for the battery is out of power and the key can not be found).

REMOVABLE SHELF

This safe box has a removable shelf,with the shelf,you could place password, jewelry,watches.

MOUNTING INSTRUCTIONS

NOTE:Please make sure to mount the safe box on the wall .Mark the drilling spots on the wall from the inside pre-drilled holes, then remove safe box and drill the holes. Drill the appropriate diameter and depth of pilot holes depending on the type of hardware.

Put the expansion bolts into the drilled holes,take the expansion bolt out of the sleeves,then place the safe box and align the pre-drilled holes with drilled holes, and insert the expansion bolts into its sleeves from inside of the safe.

DUAL ALARM SYSTEM

1. 3 consecutive wrong password, the alarm will sound and stop it by entering correct password .the alarm will sound for 30 seconds.
2. In the sleep state, press “#” to wake up the screen, and then press “*” to hear the sound of “Di”, the key light is off, indicating that it has entered the alert state. When the safe is shaken, it will alarm, at this time entering the correct password , the alarm state is deactivated. If no action is taken, the alarm will automatically stop after 30 seconds.

EMERGENCY BATTERY BOX
If the battery is low to open the the door, insert 4AA 1.5V batteries in the emergency battery box, plug the emergency power cord into the emergency jack on the bottom edge of the panel, then enter the correct password to open the door.

RESET THE SYSTEM

1. Press and hold the setting button for about 5 seconds, prompt sound comes up, indicating the reset successful.(All stored codes will be deleted,please use the initial password to unlock).
2. The initial password is 123456. You are advised to change it.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>