dyson SV12 Purifier Big Quiet Formaldehyde User Guide

dyson SV12 Purifier Big Quiet Formaldehyde

Product Information

Specifications

• Model: SV12 JN.00000 PN.000000-00-00
• Version: 01

Getting Started

To assemble your machine, follow these steps:

1. Use both hands to lift your machine out of the box by its base.
2. Your machine comes with a HEPA filter, carbon filter, and permanent catalytic filter already installed. No additional installation is required.
3. Lift the conic amplifier out of the box and place it on the top of your machine.
4. Rotate the conic amplifier until it clicks securely into place.
5. Plug in the machine and press the power button on the screen or remote control.

Positioning Your Machine

To ensure effective purification, position your machine as follows:

• Place your machine on a level floor.
• Position your machine on the edge of the room at least 1 meter from the wall.
• The conic amplifier should point to the furthest point along the wall.
• You can also position your machine diagonally across the room.

Connecting to the MyDysonTMapp
To connect your machine to the MyDysonTMapp, please follow these steps:

1. Download the MyDysonTMapp from the App Store or Google Play.
2. Open the app and follow the on-screen instructions to create a new account.

Connecting to Your Smart Home
To connect your machine to your smart home, please follow the instructions specific to your AndroidTM device.

Power On/Off
To turn your machine on or off, press the Stand-by on/off button on your Dyson air purifier or remote control. Your machine will continue to monitor the air quality.

Continuous Monitoring
Continuous monitoring is turned off by default. To activate it and view your historic AQ (air quality) data, follow these steps:

1. Activate continuous monitoring in the settings of MyDysonTMapp.
2. Your Dyson air purifier will gather air quality and temperature information, displaying it on the LCD screen and in the MyDysonTMapp.

Getting started

Assembling And Positioning your machine

Assembling your machine

• Use both hands to lift your machine out of the box, by its base.
• Your machine comes with a HEPA filter, carbon filter and permanent catalytic filter. These are already installed in your machine.
• Lift the conic amplifier out of the box and place it on the top of your machine.
• Rotate the conic amplifier until it clicks securely into place.
• Plug in and press the power button on the screen or remote control.
• Place the remote control on the front of your machine with the buttons facing down.

Positioning your machine

• Your machine is fitted with wheels to make it easier to move.
• Position your machine on a level floor.
• For the most effective purification, position your machine on the edge of the room at least 1 metre from the wall, with the conic amplifier pointing to the furthest point, along the wall.
• You can also position your machine facing diagonally across the room.

Connecting to the app And smart home

Connecting to the MyDyson™ app

• Take full control with the MyDyson™ app and access step-by-step setup and support, control how and when your Dyson air purifier operates, monitor air quality with visual updates and automatically keep up to date with the latest software updates.
• Download the MyDyson™ app from the App Store or Google Play.
• Open the app and follow the on-screen instructions to create a new account.
• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
• App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
• Google Play and the Google Play logo are trademarks of Google Inc.
• The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.

Connecting to your smart home

Using Amazon Alexa

• Ask Alexa to enable the Dyson skill – to help control your air purifier.
• Set a routine that automates how your machine works with other devices in your home.

Using Google Assistant

• Control all of your connected purifiers with Google or set a routine to automate how your machine works with other devices in your home. Just say “Hey Google” to get started.

Using Siri

• Connect your Dyson machine to Siri Shortcuts to control it by voice on your Apple device.

Power on/off
Press the Stand-by on/off button on your Dyson air purifier or remote control to start/stop your machine. It will continue to monitor the air quality.

Continuous monitoring

• Continuous monitoring is turned off by default. You’ll need to activate it to see your historic AQ data.
• With continuous monitoring active, your Dyson air purifier will gather air quality and temperature information, displaying it on the LCD screen and in the MyDyson™ app.

Continuous monitoring on/off

• You’ll be prompted to activate Continuous monitoring on the MyDyson™ app. To turn it on or off using the remote control, press and hold the Auto mode button for five seconds. The LCD screen will indicate the Continuous monitoring status.

Wi-Fi connectivity

• Wi-Fi is turned on by default. To turn the Wi-Fi on or off, press and hold the Stand-by on/off button on your machine for five seconds.

Information menu

• Press this button to scroll through information monitored by your Dyson air purifier.

• Information about air quality, temperature, humidity and filter levels is shown on the LCD screen.

• When a particular type of pollutant causes air quality to decrease, a symbol for the pollutant will show on the LCD screen.

• Indoor air quality

  • The air quality graph shows the last 12 seconds of data.

• Particulate matter (PM10)

  • Larger microscopic particles up to 10 microns in size, are suspended in the air we breathe. These include dust, mold and pollen.

• Nitrogen dioxide and other oxidizing gases

  • Potentially harmful gases are released into the air by combustion from cooking and vehicle exhaust emissions.

• Indoor humidity

  • The amount of water vapor in the air, is shown as a percentage.

• Formaldehyde (HCHO)

  • A common indoor pollutant released for many years from furnishings, floorings and glue.

• Carbon dioxide (CO2)

  • CO2 can build up indoors without adequate ventilation, which can impact cognitive function.

• Particulate matter (PM2.5)

  • Microscopic particles up to 2.5 microns in size, are suspended in the air we breathe. These include smoke, bacteria, and allergens.

• Volatile organic compounds

  • VOCs are potentially harmful odors found in cleaning products, paints, and furnishings.

• Indoor temperature

  • Monitor the ambient temperature of the room.

• Filters

  • The remaining filter life on the LCD screen indicates when filters need replacing.

• Wi-Fi

  • The current status of connection to the Wi-Fi network.

Auto purify

• Set your air purifier to Auto mode and the onboard sensors will intelligently adjust the settings of the machine according to the air quality.
• Air quality: your machine will pause when the target air quality has been reached, switching on again when the air quality levels drop.
• Airflow speed: the airflow speed will increase to its maximum until the target air quality has been reached.

Set airflow speed and direction

• Increase or decrease the airflow speed and change air direction from 0° to 50° using the remote or MyDyson™ app.
• Select Breeze mode by repeatedly pressing down on the airflow direction button until it activates or by using the MyDyson™ app.

Night mode and Sleep timer

• In Night mode, your Dyson air purifier will continue to clean the air quietly, in a lower airflow speed with its LCD screen dimmed.
• Press the Night mode and Sleep timer button to scroll through the timer options.

Changing your HEPA filter

The MyDyson™ app and the LCD screen will alert you when your filter life is running low. Replacement filters are available to buy on www.dyson.com

Remove the conic amplifier

• Slide the Release button on the back of the conic amplifier to unlock.
• Lift the conic amplifier off your machine.
• Lift the outer cover off the base of your machine.

Remove the filter
The HEPA filter is located in the outer cover. Press the filter release buttons located on the inner rim and lift the outer cover off the filter.

Dispose of the filter

• Install a new filter
  • Remove your replacement filter from any packaging. Place the filter on the base of your machine.
  • Place the outer cover over the filter and press down until it clicks securely into position.
  • Place the conic amplifier on your machine and rotate until it clicks securely in position.
  • Plug in, switch on and reset your filter life.

Reset your HEPA filter life

• It’s important to reset the filter life after replacing your filter.
• Press and hold the Night mode button on the remote control.
• The LCD screen on your machine will count down from five, until a tick appears on the screen.
• The filter life has been reset and your machine is ready to use.

**Changing your carbon filter

**

The MyDyson™ app and the LCD screen will alert you when your filter life is running low. Replacements are available to buy on www.dyson.com

Remove the conic amplifier

• Slide the Release button on the back of the conic amplifier to unlock.

• Lift the conic amplifier off your machine.

• Lift the outer cover off the base of your machine.

• Remove the filter
  The carbon filter is wrapped around the central body of your machine. Pull each of the four clips towards you to release the filter.

• Dispose of the filter.

Install a new filter

• Remove your replacement filter from any packaging.
• Wrap the filter around the base of your machine, fit the clips in position, and push each one to secure the filter.
• Place the outer cover and HEPA filter back in position on the base of your machine.
• Place the conic amplifier on your machine and rotate until it clicks securely in position.
• Plug in the switch on, and reset your filter life.

Reset your carbon filter life

• It’s important to reset your filter life after you have replaced your filter.
• Press and hold the down airflow direction button on the remote control.
• The LCD screen on your machine will count down from five, until a tick appears on the screen.
• The filter life has been reset and your machine is ready to use.

Looking after your machine

To always get the best performance from your Dyson air purifier, it’s important to regularly clean it and check for blockages.

Cleaning your machine: If your machine is dusty, wipe with damp, lint- free cloth.

• Check the sensor inlets on the left hand side of the conic amplifier for dust and debris.
• Look for dust and debris in the outer cover and in the conic amplifier. Use a soft brush to remove dust and debris.
• Don’t use detergents or polishes to clean your machine.

FAQ

• Q: What does the LCD screen display?
  • A: The LCD screen reports indoor air quality in real-time.
• Q: How does the integrated sensor system work?
  • A: The integrated sensor system detects pollutants across a whole room.
• Q: What is the purpose of the MyDysonTMapp?
  • A: The MyDysonTMapp allows you to track current and historical data, control your machine remotely, set schedules, and track filter life.
• Q: Where can I find the remote control?
  • A: The remote control can be magnetically stored on the front of the machine for easy access.
• Q: What filters are included with the machine?
  • A: The machine comes with a HEPA filter, carbon filter, and permanent catalytic filter already installed.
• Q: How do I change the HEPA filter?
  • A: To change the HEPA filter, please refer to the instructions provided in the user manual.
• Q: How do I reset the filter life?
  • A: To reset the filter life for both the HEPA and carbon filters, please refer to the instructions provided in the user manual.
• Q: How do I take care of my machine?
  • A: Proper care and maintenance instructions for your machine can be found in the user manual.
• Q: How do I download the MyDysonTM app?
  • A: You can download the MyDysonTMapp from the App Store or Google Play.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>