Govee H605C TV Backlight T2 User Manual

Govee H605C TV Backlight T2

Safety Instructions

Read and follow all the safety instructions:

• Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
• When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s lifespan.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the strip lights, as it may cause short-circuiting.
• Do not install the strip lights near any heat sources.
• Do not allow children to install the strip lights alone.
• Avoid installing the strip lights near potentially dangerous sources (e.g., candles,liquid-filled objects).

Introduction

Thanks for choosing Govee TV Backlight. This product will significantly improve your watching experience with the specially designed two cameras installed on the top center of the monitor that captures the screen color and synchronizes it to the light bars behind the TV in real time, bringing you an extraordinary watching atmosphere.

What You Get

At a Glance

Installing Your Device

1. Preparation Before Installing:
   • Unbox the strip lights and check all items listed in the packing list.
   • Power on the strip lights and check whether they light up.
2. Installing Steps:
   • Wipe the installation surface to ensure it is dry and clean.
   • Stick the strip lights to the back of the TV. Press them firmly and then reinforce them with the provided clips.
   • Position the camera to the top-center of the TV.
   • Insert the cable of the strip lights and the camera into the control box. (Type-C/DC)
   • Ensure that the control box is in a proper position near your TV.
   • Power on the strip lights and try connecting them with the Govee Home app.

Pairing Your Device with the Govee Home App

What you need:

A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Turn on the Bluetooth in your smartphone.
3. Open the app, tap the”+” icon in the top right corner and search “H605C”.
4. Tap the device icon and follow the onscreen instructions to complete pairing.

Calibrating the Camera with the Govee Home App

1. Mount the camera to the center of the screen.
2. Stick the form stickers to the 7 calibration points on the screen.
3. Open Govee Home App and click to enter the page of H605C. Enter the settings page and click “Calibration”. Follow the in-app instructions to complete the calibration.

Tips:
Drag the calibration points on the app screen to the locations of corresponding orange foam stickers.
The red calibration points are the same one orange foam sticker in two different cameras.

The picture will distort under the fish-eye camera. Ensure the calibration points are chosen correctly and the calibration lines do not overlap or cross each other.

Controlling the Device with Your Voice

1. Open the app, then tap the device icon to enter detail page.
2. Tap the setting icon in the top right corner.
3. Select Using Guidance and follow on-screen instructions to control the device using your voice.

Specifications

Troubleshooting

1. The strip lights do not light up.
   • Check all wired connections. Unplug and Re-plug the power adapter and the DC port to ensure the control box powers on correctly. The strip lights will light up 1 Os after being powered on.
   • Ensure the strip lights are plugged into the LED port before they are powered on.
   • If you unplugged the strip lights, reboot the power adapter after the lights are working correctly.
2. Calibration failed.
   • Calibrate the strip lights again.
   • Ensure no other strong lights are affecting the camera.
   • Calibration points must be chosen correctly. For example, the top calibration point on your TV cannot be dragged to the bottom. The calibration lines cannot overlap or cross each other.
   • Calibration can only begin after the strip lights are successfully connected to Wi-Fi.
3. The provided adhesives don’t stick well.
   • Wipe the installation surface to ensure it is dry and clean.
   • When attaching the strip lights, ensure you press down firmly.
   • Reinforce the strip lights with the provided clips or other strong adhesives.
4. Calibration and picture upload failure
   • With your smartphone, check whether the Wi-Fi connection is stable.
5. Wi-Fi connection failure
   • Do not skip the Wi-Fi connecting step during setup. Ensure you input the correct Wi-Fi name and password according to the app instructions.
   • 5GHz Wi-Fi is not supported. Connect the strip lights to a 2.4G Wi-Fi band then reboot your router.
   • With your smartphone, check whether the Wi-Fi connection is stable.
   • The strip lights are not compatible with the Wi-Fi name or password. Please change the Wi-Fi name and password.
   • The strip lights are not compatible with your router. Please try to connect your strip lights to a smartphone hotspot.

Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Cli) Official Website: www.govee.com
CEJ @Govee II @govee_official  @govee.official rJ @Goveeofficial @Govee.smarthome

Compliance Information
EU Compliance Statement:
Shenzhen lntellirocks Tech. Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.govee.com/
EU contact address:
SUNRISE MOMENTS LIMITED (E-mail: info@sunrisemoments.com)1 st Floor Newmarket House, Newmarket Square, The Coombe, Dublin 8, DUBLIN, Ireland, D08VAP9

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points.With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

For ambiance lighting only. Not for illumination.

• This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced.
• The light source or separate control gear is not intended for use in other applications.
• Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
• Do not use the rope light when covered or recessed into a surface;
• Do not open or cut the rope light.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1 S of the FCC Rule
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This Class B digital apparatus complies with Canadian ICES-005.

Responsible party:
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support

FOR INDOOR USE ONLY
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license.
Govee is a trademark of Shenzhen lntellirocks Tech. Co., Ltd.
Copyright ©2021 Shenzhen lntellirocks Tech. Co., Ltd. All Rights Reserved.

Govee Home App
For FAQs and more information,please visit: www.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>