Rack Buddy RB-09-0003-47 John Kiefer shelf Instructions
- June 4, 2024
- Rack Buddy
Table of Contents
Rack Buddy RB-09-0003-47 John Kiefer shelf
INSTRUCTIONS
Mark the holes in the “Flanges” on which surface the shelf should be placed.
Use a spirit level to keep the shelf hanging straight.
Depending on the surface; holes must be pre-drilled for plugs and /or
“Flanges” fastened with screws
Collect “shelf-carry-arms”.
Place the shelf in the desired position and mark the holes with a pencil.
Check if shelf is level with spirit level – if not, adjust the flanges
accordingly.
Pre-drill the holes in the shelf, with a 3,5 or 3 mm drill.
Be careful not to drill through!!
Mount the shelf with the screws.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>