MAYTAG COMMERCIAL W11681276A Commercial Gas Dryer Instruction Manual
- June 15, 2024
- MAYTAG COMMERCIAL
Table of Contents
MAYTAG COMMERCIAL W11681276A Commercial Gas Dryer
Product Information
Specifications
- Product: Commercial Gas Dryer
- Model: W11681276A
Product Usage Instructions
Safety
Your safety and the safety of others are very important. Always read and obey
all safety messages provided in the manual and on the appliance.
The safety alert symbol is used to indicate potential hazards that can cause
harm or injury.
There are two types of safety messages:
- DANGER: Immediate action is required to prevent serious injury or death.
- WARNING: Failure to follow instructions can result in serious injury or death.
All safety messages will describe the hazard, provide instructions to reduce the risk of injury and explain the consequences of not following the instructions.
Install Labels
NOTE: The Label Kit is only required for installations in Greece, Italy, or Hungary.
WARNING: To prevent electrical shock, disconnect power before servicing. Replace all parts and panels before operating.
- Locate the part number printed on the individual Labels provided in the Label Kit.
- Refer to the diagrams on page 8 of the instructions to determine where the replacement Labels need to be applied.
Additional Safety Information
This section provides safety information on different languages:
- English: Potential hazards that could cause serious injury are indicated by this alert symbol. Specific instructions are provided to reduce the risk of accidents.
- Español: This contains important safety messages in this manual and the device. Always leave and remember all safety messages.
FAQ (Frequently Asked Questions)
Q: When is the Label Kit required?
- A: The Label Kit is only needed if the Dryer is installed in Greece, Italy, or Hungary.
Q: What should I do before servicing the dryer?
- A: To prevent electrical shock, disconnect power before servicing. Replace all parts and panels before operating.
Q: How do I install the replacement Labels?
A: Follow these steps to install the replacement Labels:
- Locate the part number printed on the individual Labels provided in the Label Kit.
- Refer to the diagrams on page 8 of the instructions to determine where the replacement Labels need to be applied.
DRYER SAFETY
- Your safety and the safety of others are very important.
- We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
- This is the safety alert symbol.
- This symbol alerts you to potential hazards that can kill or hurt you and others.
- All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
- DANGER You can be killed or seriously injured if you don’t immediately follow instructions.
- WARNING You can be killed or seriously injured if you don’t follow You can be killed or seriously injured if you don’t follow
- All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury and tell you what can happen if the instructions are not followed.
INSTALL LABELS
- NOTE: The Label Kit is only needed if the Dryer is installed in Greece, Italy, or Hungary.
- IMPORTANT: Apply all Labels supplied in the Label Kit as instructed.
WARNING Electrical Shock Hazard
- Disconnect power before servicing.
- Replace all parts and panels before operating.
- Failure to do so can result in death or electrical shock.
- Locate the part number printed on the individual Labels provided in the Label Kit.
- Reference the diagrams shown in these instructions on page 8 to locate where the replacement Labels need to be installed on the Dryer.
- NOTE: In some instances, multiples of the same Label are supplied due to multiple locations on the Dryer for the same label.
- Locate the existing Label on the Dryer that the replacement Label will be installed over.
- Wipe the surface of the existing Label to remove any dust or oils, using a clean cloth.
- Remove the Label from the backer and install on top of the existing Label.
NOTE: The replacement Label will be the same size and shape as the existing Label it will be installed over.
DIAGRAM
©2023 All rights reserved
Documents / Resources
|
MAYTAG COMMERCIAL W11681276A Commercial Gas
Dryer
[pdf] Instruction Manual
W11681276A Commercial Gas Dryer, W11681276A, Commercial Gas Dryer, Gas Dryer,
Dryer
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>