GoSurround 350 Bluetooth Soundbar User Manual

GoSurround 350 Bluetooth Soundbar

Product Information

The GoSurround 350 is a Bluetooth soundbar that provides an immersive audio experience. With its sleek design and powerful drivers, it delivers high- quality sound for your entertainment needs.

• Specifications
  • Model: GoSurround 350
  • Drivers size: 2 x 52 mm
  • Frequency Range: 100Hz – 20kHz
  • Product Sensitivity: 80dB
  • Battery Capacity: 2,000 mAh
  • Total Playtime: Up to 14 hours
  • Charging Port: Type C
  • Input Voltage: 5VDC, 1A
  • Product Dimensions: 425 x 80 x 70mm
  • Transmission Distance: 10m
  • Charging Time: 3-4 hours
  • Bluetooth Version: V5.3

Product Usage Instructions

• Power On/Off
  • To power on the GoSurround 350, slide the button to the right to the ON position. To power off, slide the button to the left to the OFF position.
• Music Play/Pause
  • To play or pause music, short press the button once.
• Answer/End Call
  • To answer or end a call, short-press the button once.
• Reject Call
  • To reject an incoming call, long press the button.
• Next Song
  • To play the next song, short press the + button once.
• Previous Song
  • To play the previous song, short press the – button once.
• Volume Up
  • To increase the volume, press the + button once.
• Volume Down
  • To decrease the volume, press the – button once.
  • Mode Change Key: Power Saving Mode
  • To switch between BT/USB/TF modes, short-press the M button.
• TWS Function
  • You can connect 2 GoSurround 350 soundbars at the same time to enhance your audio experience.
  • Make sure both soundbars are in proximity and Bluetooth mode.
  • Long press the Play button on the main soundbar until you hear a beep sound. This indicates that the 2 soundbars are connected in TWS mode.
• Led Light
  • To turn off the RGB lights or switch to green light, short press or long press the button while in BT mode.
  • Note: The GoSurround 350 can also be used while it is being charged.
• FAQ
  • Why do I hear a ‘pop’ noise between songs?
  • Some terminal music players do not have an automatic switching play function, which can result in a ‘pop’ noise between songs.
  • I am unable to connect wirelessly to my mobile device. What should I do?
  • If you are unable to connect wirelessly to your mobile device, try removing the speaker from your mobile device’s list of saved devices and try again.
  • The sound performance is not optimal. What could be the issue?
  • A weak connection between the mobile device and the speaker can affect the sound performance. To improve the connection, move the mobile device closer to the speaker or remove any obstacles between the two devices. Additionally, low battery power can also affect the speaker’s sound performance, so ensure that the speaker is fully charged.
• Safety Instructions
  • Read these instructions before using the product.
  • Read all warnings carefully.
  • Follow all instructions carefully.
  • Do not use this apparatus near water.
  • Clean only with a dry cloth.
• Package Contents
  • 1 x GoSurround 350
  • 1 x Type C charging cable
  • 1 x Aux cable
  • 1 x User manual
  • 1 x Warranty card

HOW TO USE

Note: The product can also work while it is being charged.

INTEGRATED CONTROL PANEL

MULTIPLE CONNECTIVITY

TWS FUNCTION

• Connect 2 GoSurround 350 at the same time to level up your party game.
• Make sure that both your soundbars are in proximity add in Bluetooth mode.
• Long press the Play button on the main soundbar till you hear the beep sound.
• Then your 2 soundbars are connected in TWS mode.

TROUBLESHOOTING

• Some terminal music players do not have an automatic switching play function, which may result in a ‘pop’ noise between songs.
• If you are unable to connect wirelessly to your mobile device, try removing the Speaker from your mobile device’s list of saved devices.
• A weak connection between the mobile device and the speaker can affect the sound performance.
• To improve the connection, move the mobile device closer to the speaker or remove any obstacles between the two devices.
• Low battery power can also affect the speaker’s sound performance.
• Please ensure that the speaker is fully charged to resolve this issue.

SAFETY INSTRUCTIONS

1. Read these instructions before using the product.
2. Read all warnings carefully.
3. Follow all instructions carefully.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.

Get ready for MORE, for a LIFE of WOW with your all-new GoSurround 350. We strongly recommend you go through this manual completely before beginning to use the product as it contains important technical information to ensure you have a seamless audio experience. It can also be referred to in times of difficulty.

PACKAGE CONTENTS

• 1 x GoSurround 350
• 1 x Type C charging cable
• 1 x Aux cable
• 1 x User manual
• 1 x Warranty card

SPECIFICATIONS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>