VIGOR DR1500DQ Rear Suspension Enhancement System Kit Installation Guide
- June 15, 2024
- VIGOR
Table of Contents
**VIGOR DR1500DQ Rear Suspension Enhancement System Kit Installation Guide
**
INSTRUCTION
- A. HOLLOW RUBBER SPRING (2)
- B. AEON LCOATOR 3.15 ODx V THK (2)
- C. HCS M10x50x 1.5 F/T GR &8 Z (2)
- D. NYLOCK LOCKNUT MIO 1.5GR 8.0 Z (2)
Clearance Instructions
Rear SES Kits for Pick-Ups and Vans should have a 1/2″ to 1-1/2″ gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact. Medium and Heavy-Duty Trucks, Trailers and Motorhomes wHI be in constant contact, and have no gap.
-
Raise vehicle allowing the axle to hang freely.
-
Remove existing bump stop by prying out of bump stop cup.
-
Position spring assembly into bump stop cup.
-
Use soapy water and position spring assembly into bump stop cup. Push and twist simultaneously.
-
Ensure assembly is properly seated in bump stop cup.
-
To ensure that the assembly is property seated in the cup, it will help to place a temporary spacer such as a short piece of 2×4 wood between the axle and the assembly.
Customer Services
If you have any questions about this product, please contact us below:
Phone : + 1-604-636-8654 (Monday–
Friday, 8 am – 6 pm PST)
Email:support@vigorairride.com
Thank you very much!
Documents / Resources
|
VIGOR DR1500DQ Rear Suspension Enhancement System
Kit
[pdf] Installation Guide
DR1500DQ Rear Suspension Enhancement System Kit, DR1500DQ, Rear Suspension
Enhancement System Kit, Suspension Enhancement System Kit, Enhancement System
Kit, System Kit, Kit
---|---
|
VIGOR DR1500DQ Rear Suspension Enhancement System
Kit
[pdf] Installation Guide
DR1500DQ, GMRCK25D, Air Suspension Kits, DR1500DQ Rear Suspension Enhancement
System Kit, Rear Suspension Enhancement System Kit, Suspension Enhancement
System Kit, Enhancement System Kit, Kit