SOUND TOWN ZETHUS-218SPW DUAL 18 Inch Powered Line Array Subwoofer User Manual
- June 15, 2024
- Sound Town
Table of Contents
DUAL 18″ Powered Line Array Subwoofer
(Built in Class D amplifier with DSP)
ZETHUS-218SPW
PRODUCT MANUAL
IMPORTANT SAFETY INSTRUCTIONS
-
Read all safety and operating instructions before using this product.
-
All safety and operating instructions should be kept for future reference.
-
Read and understand all warnings listed on the operating instructions.
-
Follow all operating instructions to operate this product.
-
This product should not be used near water, i.e. Bathtub, sink, swimming pool, web basement etc.
-
Only use dry cloth to clean this product.
-
Do not block any ventilation openings, it should not be placed flat against a wall or placed in a built-in enclosure that will impede the flow of cooling air.
-
Do not install this product near any heat sources, such as, radiators, heat registers, stove or other apparatus (including heat producing amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The side blade or the third prong are provided for your safety if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord being walked on or pinched particularly at Plugs, convenience receptacles and the point where they exit from the apparatus. Do not break the ground pin of the power supply cord.
-
Only use attachments specified by the manufacturer.
-
Use only the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus.
When a cart is used use caution when moving cart/apparatus combination to avoid injury from tip-over. -
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Care should be taken so that objects do not fall and liquids are not spilled into the unit through the ventilation ports or any other openings.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way; such as, power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
-
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
-
When the MAINS plug, or an appliance coupler is used as the disconnect device, the disconnect device should remain readily operable.
-
Protective Ground Terminal: The apparatus shall be connected to an AC main socket with a protective earth ground connection.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CHASSIS. NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
FEATURES
-
The SOUND TOWN ZETHUS series powered subwoofer has a built-in high power Class-D amplifier with digital signal processor (DSP). The Bi-Amp solution provides more powerful bass while ensuring stability.
-
The DSP features dynamic bass enhancement, RMS dynamic processor and 2nd order IIR filter. Digital EQ presets available.
Full range or high pass signal outputs switchable, ideal for use together with other speakers either subwoofer or full range tops. -
Customized 4″ voice coil high power low frequency driver provide powerful and strong bass sound.
In the package
- ZETHUS subwoofer
- Power cable
- 1 User Manual
- 1 Warranty Card
How can we help you?
CONTACT OUR US-BASED SUPPORT TEAM
Simple or complex, your questions are important to us. For service, support or
more information, please contact the Sound Town support team:
Email: support@soundtown.com
Rear Panel Instruction
A. Combo Inputs:Two balanced 1/4″/XLR combo jack (L/R) are provided. This
allows for stereo input from two separate feeds. The subwoofer will work with
only one input connected.
B. XLR Outputs:
Two balanced XLR (L/R) are provided for signal output.
C. Master Volume Control: volume of the subwoofer. Standard usage is setting
this control at 50%.
This controls the gain of the input signal. It will raise and lower the
D. Polarity Switch: position of other speakers (or subwoofers) relative to it.
Press this switch to reverse the polarity (phase) of subwoofer. It depends on
the
Press to select the 4 presetting modes. The default setting are:
E. EQ Presets:
MODE 1: 90Hz low pass;
MODE 2: 120Hz low pass;
MODE 3: 180Hz low pass;
MODE 4: 300Hz low pass;
This does not add bass to the signal, it determines how much high frequency is
cut out of the signal.
This controls the 2 XLR (‘B’) outputs frequency range: switch to ‘FULL RANGE’
F. OUTPUT MODE: to control the XLR to output passthrough full range signal,
switch to ‘HIGH PASS’ to control the XLR to output 80Hz high pass signal.
G. Power LED:
This indicator will light when the subwoofer is turned on.
H. Signal LED:
Flashing when there is signal input.
This indicator lights up when the amplifier is near clipping. An occasional
flickering is
I. Limit LED: acceptable. If LED is lit continuously, adjust the level control
and reduce the output level of connected sources. Failure to do so may lead to
premature failure of your speaker.
J. USB Interface: DO NOT charge.
The USB socket is an interface for manufacturer to adjust the EQ presets,
please
K. Power Switch:
To turn/off the speaker.
L. AC Input:
the proper AC line voltage to the unit. Do not connect to intermittent or
faulty power.
Neutral PowerCon (A) receptacle for power input (115V 60Hz). It is important
to supply
Sound Town Inc.
Los Angeles, California, USA
www.soundtown.com
© 2023 SOUNDTOWN // Features and specifications are subject to change and or
improvement without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>