CooLFire CSB110 Bluetooth Sweatband Vibrating Alarm Watch User Guide

CooLFire CSB110 Bluetooth Sweatband Vibrating Alarm Watch User Guide

‘Thank you for purchasing CoolFire!

Comfortable. Your CoolFire Bluetooth Vibrating sweatband is comfortable to wear on your wrist and it wakes you up with strong haptic vibrations.

Easy to set. Set itself automatically once connected. You can set multiple vibrating alarms easily on the App

Rechargeable. It is powered by a lithium rechargeable battery that runs the watch for 4 weeks with a single full charge.

CoolFireSB App

Install the App

CoolFireSB

Icon of the App

Support iPhone iOS 13 and above.

Scan this QR code with your f it the devi TIME AND CALENDAR DISPLAY IPhone to install the App.

Or, ) search CoolFireSB on the How to charge the watch? 14 App Store to install the App.

Support Android OS 7 and above.

Scan this QR code with your Android phone to install the App.

Or, search CoolFireSB on the Google Play to install the App.

How to pair your watch?

Step1
Open the CoolFireSB App and tap the connect button to start a connection

Step2
Tap this icon to make a connection. Follow prompts to pair the device

Wake up your watch

WAKE UP YOUR WATCH

To wake up your watch.hold the BIG button on your sweatband watch for 3 seconds.

You can release the button when the time shows up.

Auto Time and Calendar Setting

Time and Calendar will be set automatically by the CoolFireSB app once connected.

Just connect the watch with the app and it will set up the time and calendar by itself.

TIME AND CALENDAR DISPLAY

Press the BIG button one after another to show time and calendar on the watch.

Sync time with your phone while you sleep

Your watch is still working while you are sleeping The watch syncs time with your phone at midnight to keep the time accurate. This syncs the DST time with your phone as well while you sleep.

Keep the CoolFireSB App running in the background

How to add and edit alarms? Maximum 4 alarms

Connect the watch with the CoolFireSB app. Then, add, edit and On/Off alarms like how you do it on your smartphone.

Tips: This watch is not designed for heary sleepers. You can try setting up more than 1 alarm to wake you up if you are a heavy sleeper.

How to check alarm settings on my watch?

Alarms can only easily be set on your phone. You can check alarms settings on the CoolFireSB App and on your watch.

TO CHECK ALARM SETTINGS ON YOUR WATCH

Press the BIG button one after another until you see AL 1 (this means Alarm 1) then press the same button again to show the alarm time settings of Alarm 1.

Continue to press the same button one after another to show alarm 2 to 4.

How to Snooze or Stop the alarm?

Snooze the alarm

When the alarm goes off, press the BIG button once| to put the alarm to snooze with the SNZ flashing (the alarm comes back after a few minutes)

EXIT FROM SNOOZE

You can exit the snooze mode by holding the BIG button for more than 2 seconds until the SNZ icon disappears.

Stop the alarm

When the alarm goes off, press and hold the BIG button for 2 seconds to stop the alarm.

How to wash the sweatband?

The sweatband watch is not water resistant. Avoid contact with liquids.

Detach the watch before washing the sweatband.

You need to detach the watch from the sweatband by following the directions marked on the Locking Ring to release or lock the watch. Then, push out the watch from the sweatband for washing.

How to charge the watch?

The watch can run for more than 4 weeks after a full charge.

Connect the USB cable (provided) to any USB adaptor. Plug it in to the Charging Socket of the watch for 8 hours for a full charge.

**** It is recommended to charge up the watch every month to prolong the battery life. Never allow the battery drain out (drop to OV) or the battery dead and a new battery needs to be replaced.

MAINTENANCE

• DO NOT wash the sweat band before detaching the watch.
• Charge your watch every 4 weeks to avoid battery drain off to dead.
• This is NOT a toy, keep away from baby and children.
• DO NOT place or store the product near heat or open flame.
• DO NOT place or store the product in moist, dust place or the place with corrosive gas.
• Avoid heavy strike.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfu Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

1 Year Limited Warranty
supports@daveecom.com

SUPPORT CENTER

www.daveecom.com/setuphelp
(To watch the Setup Video)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>