BOSCH SMH8ZCX01E Dishwasher User Guide

BOSCH SMH8ZCX01E Dishwasher

Product Information

Specifications:

• Product: Dishwasher
• Model: SMH8ZCX01E
• Water Hardness Range:
  • Soft: 0 – 1.1 mmol/l or 0 – 8 setting value
  • Medium Soft: 1.2 – 1.4 mmol/l or 9 – 10 setting value
  • Medium: 1.5 – 1.8 mmol/l or 11 – 12 setting value
  • Medium Hard: 1.9 – 2.1 mmol/l or 13 – 15 setting value
  • Hard: 2.2 – 2.9 mmol/l or 16 – 20 setting value
  • Very Hard: 3.0 – 8.9 mmol/l or 21 – 62 setting value

Product Usage Instructions

Setting up Home Connect

Tip:
Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Adding Special Salt
To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the program starts.

1. Unscrew the lid of the dispenser for special salt and remove it.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
4. Place the lid back on the dispenser and turn to close.

Adding Rinse Aid

1. Press the catch on the lid of the dispenser for rinse aid and lift.
2. Add rinse aid up to the max mark.
3. Close the lid of the dispenser for rinse aid. The lid clicks into position.

Setting the Water Softening System

1. Press the power button.
2. To open the basic settings, press for approximately 3 seconds.
3. Press repeatedly until the display shows Water hardness.
4. Press or repeatedly until the right water hardness has been set.
5. To save the settings, press for approximately 3 seconds.

Programmes
The program data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the program and additional function selected. The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

How to Use Your Appliance

1. Load the tableware.
2. Add detergent. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware.
3. Switch on the appliance.
4. Select the program.
5. Start the program.
6. Remove the tableware at the end of the program.

FAQ

• Q: How do I connect my appliance to the Home Connect app?
  A: To connect your appliance to the Home Connect app, install the app on your mobile device and follow the instructions provided. Scan the QR code with the Home Connect app to establish a connection.

• Q: When should I add a special salt to the dishwasher?
  A: Add special salt to the dispenser just before starting the program to avoid damage to the appliance. Unscrew the lid of the dispenser, fill it with water on initial start-up, add the special salt, and close the lid.

• Q: How much rinse aid should I add?
  A: Add rinse aid up to the max mark on the dispenser. Close the lid of the dispenser until it clicks into position.

Before using it for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip:
Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

• Install the Home Connect app on your mobile device and follow the instructions.
• Scan the QR code with the Home Connect app.

Overview of water hardness settings

• You can find an overview of the water hardness values that can be selected here.
• A table of country-specific units can be found in the instruction manual.

Setting the water softening system

1. Press .
2. To open the basic settings, press for approx. 3 seconds.
3. Press repeatedly until the display shows “Water hardness”.
4. Press – or + repeatedly until the right water hardness has been set.
5. To save the settings, press for approx. 3 seconds.

Programmes

The program data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the program and additional function selected. The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

Overview

Adding special salt

To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the program starts.

1. Unscrew the lid of the dispenser for special salt and remove it.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid 1 and lift ⁠2.
2. Add rinse aid up to the max mark.
3. Close the lid of the dispenser for rinse aid.
   • The lid clicks into position.

Adding detergent

1. Add the detergent to the dry detergent dispenser.
2. Close the lid of the detergent dispenser.
   • The lid clicks into position.

How to use your appliance

1. Load the tableware.
   • Only clean tableware that is suitable for dishwashers.
   • Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.
2. Add detergent.
3. Switch on the appliance .
4. Select the program.
5. Start the program ⁠Start.
6. Remove the tableware at the end of the program.
7. To cancel the program, press Reset 4sec. for approx. 4 seconds. The program is canceled and ends after approx. 1 minute.

Cleaning filters

1. After each wash check the filters for residue.
2. Turn the coarse filter anticlockwise 1 and remove the filter system ⁠2.
3. Pull down the microfilter to remove it.
4. Press the locking catches 1 together and lift the coarse filter out ⁠2.
5. Clean the filter elements under running water.
6. Re-assemble the filter system.
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arms 1 and pull down to remove 2.
2. Pull up the lower spray arm to remove it.
3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
4. Insert the lower spray arm.
   • The spray arm clicks into position.
5. Insert the upper spray arms and screw firmly in place.

Clean wastewater pump

1. Disconnect the appliance from the power supply.
2. Remove the filter system.
3. Scoop out any water.
4. Prise off the pump cover using a spoon and grip it by the crosspiece.
5. Lift the pump cover inwards at an angle and remove it.
6. Remove any remnants of food and foreign bodies in the area of the impeller.
7. Insert the pump cover 1 and press down 2⁠.
   • The pump cover clicks into position.
8. Install the filter system.

Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>