Halla 60-S Lina Interior LED luminaires Instruction Manual

Halla 60-S Lina Interior LED luminaires

Product Information

Specifications

• Model: Lina60-S
• Dimensions:
  • 04S-200-10G L = 561mm
  • 04S-200-15G L = 842mm
  • 04S-200-20G L = 1122mm
  • 04S-200-25G L = 1403mm
  • 04S-200-30G L = 1683mm
  • 04S-200-35G L = 1964mm
  • 04S-200-40G L = 2244mm
  • 04S-200-60G L = 3366mm
  • 04S-200-80G L = 4488mm

Product Usage Instructions

Installation

1. Open the packaging and remove all contents.
2. Carefully position the luminaire at the desired location.

Mounting

• Ensure that there is a minimum distance of 3cm between the luminaire and any other objects.
• Use the provided screws to secure the luminaire to the mounting surface. Tighten the screws to a torque of 0.7 Nm.

Electrical Connection

1. Connect the wires according to the electrical diagram provided in the user manual.
2. Ensure that the electrical connections are secure and insulated.

Maintenance

1. Do not touch the LED lights directly. Always handle them with care.
2. Clean the luminaire regularly using a soft cloth and mild detergent.

FAQ

• Q: Can I replace the light source in this luminaire?
• A: The light source in this luminaire may only be replaced by the manufacturer its authorized service technician or a similarly qualified person.
• Q: Can I cover the luminaire with insulating material?
• A: No, the luminaire must not be covered with insulating material.

Features

Dimensions

Parts And Tools

Installation Instructions

• Luminaire must not be covered with insulating material!

• The light source in this luminaire may be replaced only by the manufacturer or its contractual service technician or a similarly qualified person!

• The installation may only be carried by authorised specialist. Always switch off the power supply before carrying out any maintenance.

• The manufacturer is not responsible for the incorrect use and assembly of its products.

• Luminaire must not be covered with insulating material!

• The light source in this luminaire may be replaced only by the manufacturer its contractual service technician or a similarly qualified person!

• The installation may only be carried out by authorised specialists. Always switch off the power supply before carrying out any maintenance.

• The manufacturer is not responsible for the incorrect use and assembly of its products.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>