BSR Memor K Mobiler Industrie Scanner Owner’s Manual
- June 15, 2024
- BSR
Table of Contents
BSR Memor K Mobiler Industrie Scanner Owner's Manual
©2020-2022 Datalogic S.p.A. and/or its affiliates
• All rights reserved • Without limiting the rights under copyright, no part
of this documentation may be reproduced, stored in or introduced into a
retrieval system, or transmitted in any form or by any means, or for any
purpose, without the express written permission of Datalogic S.p.A. and/or its
affiliates • Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S. and the E.U.
See the Safety & Regulatory Addendum included with your product for additional
regulatory, safety and legal information.
www.datalogic.com
OUT OF THE BOX
The Memor K package contains:
- Memor K Device
- Rechargeable one-piece battery pack
- Quick Start Guide
- Safety & Regulatory Addendum
- Warranty Addendum
Remove all the components from their packaging; check their integrity and compare them with all the packing documents.
⚠ CAUTION: Keep the original packaging for use when sending products to the
technical assistance center.
Damage caused by improper packaging is not covered under the warranty.
GENERAL VIEW
BATTERY INSTALLATION
SD CARD INSTALLATION
We recommend the use of Single Level Cell (SLC) industrial grade micros□ or micro SDHC memory cards for maximum performance and durability. Contact the sales support team to select the memory card for your device.
NOTE: If you use your microSD/SDHC card as portable storage, format it to Fat32 before installation.
To install the memory card:
- Remove the battery cover (see “Battery Installation”, step 1 ).
- Remove the battery.
- Insert the memory card into the slot with the written part upward.
- Replace the battery and the battery cover (see “Battery Installation”, steps 3 and 4).
CHARGING INSTRUCTIONS
The battery pack is not initially fully charged. After installing the battery,
charge it with the power supply or with the single slot dock for minimum 3.5
hours.
During the charging process the charging LED positioned at the top left side
of the display glows red constantly. Once the charging process has been
completed, the charging LED glows green constantly.
Charge with the USB
Use the USB Type-C cable (sold separately, pin 94A050044) in conjunction with the power supply adapter (sold separately, pin 94ACC0316) to charge the device from a power outlet.
Charge with the Single Slot Dock
Insert the device into the dock with the screen facing front and the head facing up.
TURN ON/OFF THE DEVICE
To turn on the Merner K, press and hold the Power Button for at least 3
seconds.
To turn off the Merner K, press and hold the Power Button until the Reboot
Options Menu appears end then tap Power Off.
Force Restart
Press and hold the Power Button for at least 10 seconds to force restart.
SCANNING AND IMAGING
To scan a bar code symbol:
- Point the scan window at the bar code.
- Press one of the scan triggers. A red spot illuminates the symbol, which is captured and decoded.
If the scan has been successful:
If enabled, the good read beep plays.
If enabled, the GreenSpot projects a green spot onto the bar code image.
If enabled, the good read indicator positioned at the top left side of the
display glows solid green.
The decode results display on the screen.
Aiming Beam
The aiming beam is smaller when the device is closer to the barcode and larger
when it is farther from the barcode.
Scan symbols with smaller bars or elements (mil size) should be read closer to
the unit and those with larger bars or elements (mil size) should be read
farther from the unit.
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax+39 0513147205
©2020-2022 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of
this documentation may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means, or for any purpose,
without the express written permission of Datalogic S.p.A. and/or its
affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser’s own
internal business purposes. Purchaser shall not remove or alter any
proprietary notices, including copyright notices, contained in this
documentation and shall ensure that all notices appear on any reproductions of
the documentation.
Electronic versions of this document may be downloaded from the Datalogic
website (www.datalogic.com).
If you visit our website and would like to make comments or suggestions about
this or other Datalogic publications, please let us know via the “Contact’
page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Data logic shall not be liable for
technical or editorial erTors or omissions contained herein, nor for
incidental or consequential damages resulting from the use of this material.
Datalogic reserves the right to change any specification at any time without
prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
in many countries, including the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other trademarks and brands are property of their respective owners.
Patents
See www.patents.datalogic.com for patent
list.
REFERENCE DOCUMENTATION
For further information regarding Memor K refer to the SOK Help on-line and to
the Memor K
User’s Manual, downloadable from our website
www.datalogic.com.
SUPPORT THROUGH THE WEBSITE
Datalogic provides several services as well as technical support through
its website.
Log on to www.datalogic.com.
For quick access, from the home page click on the search icon Q . and type in
the name of the product you’re looking for. This allows you access to download
Data Sheets, Manuals, Software & Utilities. and Drawings.
Hover over the Support & Service menu for access to Services and Technical
Support.
Jak□b-Haringer-Str.3
A-5020 Salzburg
https://www.bsr.at
sales@bsr.at