Royce Water Technologies BXD17 Single Input Controller Instructions
- June 15, 2024
- Royce Water Technologies
Table of Contents
BXD17
Single Input Controller
Measuring: pH / ORP(Redox) /
Conductivity /
Salinity / TDS / Dissolved Oxygen /
Total Suspended Solids (MLSS) / Turbidity Transmitter
BXD17 Single Input Controller
The BXD17 is a microprocessor controlled instrument range offering individual
controllers for the measurement parameters Electrodeless (Inductive) and
Contact Conductivity, pH/Redox and Dissolved Oxygen.
To achieve this the instrument utilises a clear multifunction LCD to display
the primary reading and temperature, show operational status and to provide an
intuitive user interface.
As standard the instrument is simple to install with a new custom 144x144mm
IP66 rated Wall-mount instrument, however with the addition of a suitable
mounting kit it can either be installed as a Panelmount or Pipe-mount
instrument.
The instrument has two onboard volt-free normally open-relays with adjustable
setpoint value and hysteresis. Either one can be set to activate on a High,
Low or Band operation allowing the instrument to be used in a variety of
dosing and or control applications. Additional setpoint functions include
delayed activation and dose alarm timer, whilst the status of the relays can
be seen via the main screen of the instrument.
The set points relays may also be given the function as a clean initiator to
provide automatic sensor cleaning, the clean duration, recovery time and
interval period all programmable.
Additionally, the instrument features one industry standard, isolated,
0/4-20mA current output that features adjustable scaling and selectable
onerror states, allowing the instrument to transmit the primary reading for
remote monitoring purposes.
Also fitted are two digital inputs operating on either closed or open contact
which allow the instrument to be triggered by No Flow, Low Tank Level,
Interlock or Off-line functions that forces the relays to deactivate and the
current output to a pre-defined state.
Depending upon version purchased the instrument may be powered by either
85-265V AC or 12-30V DC.
Features
- Power supply 85-265vAC (24vDC option)
- 2 off Independent digital inputs
- Accurate at zero DO
- Measurement and Temperature input
- 2 off Programmable relay outputs
- 2 off Isolated scaleable 0/4-20mA output
- Software Upgrade via Micro(SD) Card
- Available for Galvanic Dissolved Oxygen
(BGD17) and pH (BPD17)
Technical specifications
Enclosure| Front panel: 144 x 144mm
Panel cut out: 138 x 138mm
Depth behind panel: 77mm maximum
---|---
Cable Glands/Connectors| Maximum of 5, 2 x M20, 3 x M16
Material| ABS – Coloured Pantone 281C
Protection| IP66 using BS EN 60529: 1992
Equipment Safety| 2006/95/EC using BS EN 61010-1: 2010
Ambient temperature| 20 +55°C Relative Humidity 5 to 95%, non-condensing.
Power Supply| 85-265v, maximum 15 Watts. Low voltage option available –
12-30vDC
Modes| High, Low, Band, Delay, Hysteresis, Dose Alarm, Initial Charge
10 Royce Water Technologies Product Catalogue
Documents / Resources
|
Royce Water Technologies BXD17 Single Input
Controller
[pdf] Instructions
BXD17, BXD17 Single Input Controller, Single Input Controller, Input
Controller, Controller
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>