neakasa S1 Pro Dog Grooming Kits User Guide

neakasa S1 Pro Dog Grooming Kits

Neakasa S1 Pro Pet Grooming System

Specifications

• Smart Electric Control Design
• 55 dB wind noise at the lowest speed
• Removable hose
• Crevice tool
• Hair remover roller
• Handle of replaceable electric clipper
• Pin   Brush: All hair types, fine, dense, hard, bent metal filaments
• Deshedding Tool: Most hair types, dense notched blade
• Dematting Tool: Long hairs/double coats, the part between teeth are edged

Product Usage Instructions

Desensitization Tips

1. Connect the hose to the main unit and the nozzle (or the hair remover roller).
2. Power on the product and set it to the lowest speed.
3. Keep the fan running at the lowest speed for a while to minimize noise.
4. Your pets may approach out of curiosity and gradually become accustomed to the noise.
5. Stretch the suction hose to its maximum length to create distance between the main unit and your pets.
6. This will further minimize the impact from the noise while grooming your pets.
7. Offer your pets some of their favorite snacks as a distraction before and after combing or grooming.
8. Repeat this process patiently several times to help your pets become accustomed to and fall in love with their home spa.

Accessories Tray Instructions

1. Rotate the handle to the correct angle and insert it into the hole in the middle of the base.
2. Align the two rods with the corresponding holes, insert them downward directly. To remove them, grasp the rods and pull them upward.
3. Flip the base over, hold the bottom of the handle, and rotate it counterclockwise 90 degrees to secure it, as shown in the diagram. To disassemble, rotate it in the opposite direction, clockwise 90 degrees, and pull it out.

Please place accessories on the tray as illustrated, and hang deseeding and demitting combs as shown below.

Inner Box Transformation

1. After taking out the machine, unfold all four sides of the packaging top.
2. Cut out the entrance/exit for pets along the trim marks.
3. Fold the four corners upward to expose the four tongue locks, and then fold the handle part downward along the fold line.
4. Insert the four locks into the four securing mounts.
5. Attach and secure the handle ring on both sides of the handles, and place an old T-shirt with the owner’s scent as a cushion to make your furry baby more comfortable!
6. Use the provided needle to punch holes in the cardboard box.
7. Gather the clumps of fur into a ball, then thread the needle and thread through to secure them.
8. Hang it through the hole inside your pet’s bed. Mission accomplished!

Frequently Asked Questions (FAQ)

• Q: What is the noise level of the Neakasa S1 Pro Pet Grooming System?
  A: The Neakasa S1 Pro Pet Grooming System produces only 55 dB of wind noise at the lowest speed, reducing the impact on your pets to a minimum during grooming.

• Q: Can I use the deshedding tool on any hair type?
  A: The deshedding tool is suitable for most hair types. It has a dense notched blade that clears loose hair, thinning, and loose undercoat, especially applicable when the season changes. However, it is recommended to use it gently.

Q: How do I assemble the accessories tray?
A: To assemble the accessories tray, follow these steps

1. Rotate the handle to the correct angle and insert it into the hole in the middle of the base.
2. Align the two rods with the corresponding holes, insert them downward directly. To remove them, grasp the rods and pull them upward.
3. Flip the base over, hold the bottom of the handle, and rotate it counterclockwise 90 degrees to secure it, as shown in the diagram. To disassemble, rotate it in the opposite direction, clockwise 90 degrees, and pull it out.

Desensitization instructions

• The Neakasa S1 Pro Pet Grooming System has been upgraded in every aspect. Our exclusive Smart Electric Control Design and 55 dB wind noise at the lowest speed reduce the impact on your pets to a minimum during grooming.
• For pets that are extremely sensitive to noise, please refer to the following desensitization tips to help your beloved pets adapt to the grooming kit:

1. Connect the hose to the main unit and the nozzle (or the hair remover roller). Power on the product and set it to the lowest speed. Keep the fan running at the lowest speed for a while, and your pets approach out of curiosity and gradually become accustomed to the noise.
2. Stretch the suction hose to its maximum length to create a distance between the main unit and your pets, thus minimizing the impact from the noise while grooming your pets.
3. Offer your pets some of their favorite snacks as a distraction before and after combing or grooming. By repeating this process patiently several times, your pets will become accustomed to and fall in love with their home spa.

Accessories tray

1. 1: Align the two rods with the corresponding holes, insert them downward directly. To remove them, grasp the rods and pull them upward.
2. Rotate the handle to the correct angle and insert it into the hole in the middle of the base.
3. Flip the base over, hold the bottom of the handle, and rotate it counterclockwise 90 degrees to secure it, as shown in the diagram. To disassemble, rotate it in the opposite direction, clockwise 90 degrees, and pull it out.

Please place accessories on the tray as illustrated, and hang deseeding and demitting combs as shown below.

Inner box transformation

1. After taking out the machine, unfold all four sides of the packaging top
2. Cut out the entrance/exit for pets along the trim marks.
3. Fold the four corners upward as illustrated to expose the four tongue locks, and then fold the handle part downward along the fold line.
4. Insert the four locks into the four securing mounts.
5. Attach and secure the handle ring on both sides of the handles, and place an old T-shirt with the owner’s scent as a cushion to make your furry baby more comfortable!
6. Use the provided needle to punch holes in the cardboard box. Gather the clumps of fur into a ball, then thread the needle and thread through to secure them. Hang it through the hole inside your pet’s bed. Mission accomplished!

Know your S1 Pro

Use your S1 Pro

1. Key Description A single press of the on/off switch will turn on the machine. Adjust the mode by pressing the mode button. The indicator lights for low, medium, and high modes respectively display white, cyan, and purple. After powering on, the device will default to the mode that was memorized before the last shutdown.

2. No attachment connected
   The fan will remain on standby.

3. Connected to the replaceable brush
   Press the button on the handle to simultaneously eject and suck the hair into the dustbin. Release the button, and the fan will remain on standby.

4. Connected to the replaceable electric clipper
   Press the On/Off switch of the electric clipper once, and both the clipper and the main unit vacuum will start running, cutting hair and sucking it into the grooming kit. Press the clipper switch again, and both the clipper and the fan will shut down, returning the main unit to standby mode.

5. Removing the dust cup:
   Press the PUSH button on the side of the machine while turning the dustbin upwards from the side of the button, and lift and

6. Fitting back the dust cup:
   Insert the dustbin with the side with dentation into the decoration ring slot of the main unit. Push it down to secure it in place. Once you hear a “click,” the cup is properly positioned.

7. Dumping hair waste and fitting back bottom cover:
   Turn the dustbin upside down, with the handle pointing down. Grab the circle- like handle and pull the bottom cover of the cup upwards, then you can dump the waste inside. Reverse the steps above to place the bottom cover back to it’s place. Push it inwards to make sure it’s fully fitted.

Special attention

• Only use the product  when your pets’ hair is dry. Never let the  product suction wet  hair or liquids. To avoid electrical faults  and shocks, never operate or unplug the product with wet hands.
• Please always ensure proper installation of the HEPA filter prior to using the grooming vacuum, otherwise the product will be damaged. The HEPA filter should be regularly cleaned and replaced. After cleaning the HEPA filter, please wait for it to dry completely before reinserting it, otherwise it could result in electrical shocks and faults.
• The electric clipper’s body should never be cleaned with water. However, it is okay for the blades and nail grinder. Please always completely dry the attachments with a cloth or air-dry before reattaching them to the clipper, as failing to do so could damage or impair the motor.

Notes: Please consult the user manual of the S1 Pro Multifunctional Pet Grooming Vacuum for detailed instructions and more information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>