Hosanwell PS5WMC2C Wall Mount with Controller Charging Dock User Manual
- June 15, 2024
- Hosanwell
Table of Contents
PS5WMC2C Wall Mount with Controller Charging Dock
User Manual
PS5WMC2C Wall Mount with Controller Charging Dock
Product Introduction
This Hosanwell wall mount is a stylish and functional solution for storing your PS5 console (Disc & Digital), two controllers (Dual Sense & Dual Sense Edge), and a pair of headphones. The controller charging station provides both charging and storage capabilities. It is also compatible with both PS5 Dual Sense and Edge controllers. The charging status of the controllers would show through the indicator light. Orange light means charging and blue light means charging finished. The charging station is equipped with colorful RGB lights that can be adjust via buttons or a mobile app.
Product Feature
Model：PS5WMC2C
Working Voltage and Current： DC5V/3A
Output Voltage and Current： DC5V/2.5A
Charging time： 2.5-3H
Weight：1000g
Size：35412195mm
*When using a charger block (not included) for the controller charging station, make sure the power standard must be 5V2A or higher in order to avoid any impact on the charging function and lighting effect of the station.
Installation
Step 1: Make sure the wall mount is level and place it against the wall. Mark
5 screw points on the wall, aligning each point with a corresponding screw
hole on the mount.
Step 2: Use a drill to make 5 holes on the wall at the marked points and
insert 5 expansion bolts into the holes.
Step 3: Place the wall mount against the wall, aligning the screws with the 5
screw holes, and tighten the screws with a screwdriver to secure the wall
mount to the wall.
Step 4: Place the PS5 console on the mount and use the bottom screws(included)
to secure it to the mount. (The metal mount supports both front and back
installation of the PS5 console, you may choose according to your needs)
Step 5: Hang the PS5 controller charging station on the hook of the mount and
connect the PS5 console and the station using the TYPE-C to TYPE-C cable
(included).
Step 6: Hang the headphone hook on the PS5 console, place the controllers and
headphones on the mount, and done!
Attention
- Make sure the product has been correctly installed on the wall before putting your PS5 on the mount.
- The mount is compatible with both the disc and digital versions of the PS5 console and can be placed in both orientations. Please ensure it is aligned with the corresponding holes when placing the console .
Atmosphere Light Function
- Button Mode: Short press once to switch to a different lighting effect. Long press for 3 seconds to turn off the light. There are seven single-color lighting modes: red, green, blue, yellow, cyan, purple, and white. There are also six dynamic lighting modes: gradient, tailing, flowing, chasing, stacking, and flashing. In addition, there are five sound control modes.
- Mobile App Mode: Users can choose from various RGB light sequences, customize lighting modes, adjust brightness and speed, and change the sound sensitivity settings, among other features.
http://url.szszjkj.com/79810915950
- Scan the QR code above to download “LED LAMP” or search for “LED LAMP” in the iPhone App Store or Google Play Store to download it. (Note: Android phone users need to turn on location services and allow permissions.)
- Make sure your phone’s Bluetooth is turned on, open the app, and power on the station then pressing the lighting button. On the home page of the app, swipe down to automatically search for nearby devices. Once the device is found, click on the device icon to enter the lighting control interface. Alternatively, click the “⊕” button in the upper right corner, select the device, and enter the lighting control interface. (Select device “LED DMX 00-XXXX”).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>