JIGATONEDA Self Powered Wireless Doorbell User Manual
- June 15, 2024
- JIGATONEDA
Table of Contents
JIGATONEDA Self-Powered Wireless Doorbell User Manual
Model: 2301SF1 TlR
(Door Chime) (Push Button)
Important Installation Instructions
- The door chime is designed for indoor use only.
- Avoid mounting the push button on metal frames, and make sure the mounting surface is smooth.
- Avoid mounting the chime above heat sources such as radiators, or in humid circumstances such as a kitchen or bathroom.
- Please do not open and repair the device without a professional guide in order to avoid any breakdown of components.
- Please do not expose it to the sun and rain for a long time and keep it away from metallic objects when the device is in use.
- The transmitting range of the doorbell depends on the installation location and signal attenuation of the wall or floor.
- If not using the doorbell for long periods, unplug the chime from a socket.
Mount Door Chime
Just plug the door chime into the standard outlet in a room, then it will work.
Mount Push Button
- Mount Push Button without Waterproof Cover
- Use either screws or double-sided tape to mount push button.
- To mount with screws, remove back of case by pushing tab on bottom with a small screwdriver.
- Use screws to attach back of case to door jamb or wall, then lock the front of push button on it.
- doorjamb or wall is clean and smooth.
- Mount Push Button with Waterproof Cover
- Use double-sided tape or screws to attach the waterproof cover to the wall.
- Use double-sided tape to attach the back of the push button.
- Mount the push button inside the waterproof cover.
Function Key Description
- SET volume level: Press the volume button to control the volume of the melody. There are 4 adjustable volume levels.
- Change melodies: Press the melody button to select the melody you like. There are 50 different melodies.
- Reset: Press and hold the Melody button for 3 seconds, the melody will be reset to the default one.
Working Modes
-
This doorbell comes with a memory function in case of unexpected power down.
-
Change working modes for the doorbell:
Press the mode button to select -
LED light flashing only
-
Sound only
-
LED light flashing and sound
How to match more devices
-
Code Learning Function:
This unit comes with a code learning function, which allows you to expand your unit with more push button or door chimes. -
Plug the chime into the socket and power on.
-
Press the Mode button for 3 seconds to enter the code learning mode.
-
Press the push button, if a melody is heard, then code learning is successful. If not, repeat the above step to learn the code again.
Frequently Asked Questions (FAQ)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or
an experienced radio/ TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Contact us: If you need any assistance, please contact us.
Service online time (weekdays) Monday to Friday 9:00-18:00
Address: Room 208, Building 2, COFCO Chuangzhi Factory, District67,
Xingdong Community, Xin’an Street, Bao’an District
Email: service@jigatoneda.shop
Official Website: www.jigatoneda.shop
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>