trafag 8236 FPT Flush Membrane Transmitter Instruction Manual
- June 15, 2024
- trafag
Table of Contents
**trafag 8236 FPT Flush Membrane Transmitter Instruction Manual
**
Instructions
Warning: Before installation, commissioning, and operation, ensure that the pressure transmitter is suitable for the application in terms of measuring range, design and environmental conditions. Non-observance can result in serious injury and/ or damage to equipment.
Intended use: This instrument converts pressure into an electrical signal.
The instrument has been designed and built solely for the intended use described here and may only be used accordingly. If the equipment is used in a different manner, the protection provided by the equipment may be impaired and Trefah shall not be liable for any claims at all.
Datasheets
Type label description (Example)
Electrical connections
**Designation| ** EN175301-803A (DIN43650-A)| Cable (PVC) (PUR)4 x
0.25mm2| ** M12x15–pol.| Packard Metri Pack 3–pol.
---|---|---|---|---
Type code| 8236.XX.XXXX .05| 8236.XX.XXXX .08/22/24|
8236.XX.XXXX .35| 8236.XX.XXXX .51
****Pin configuration| **| ****| |
Output| Load resistance| I SUPPLY| U SUPPLY
---|---|---|---
4 … 20 mA| (USupply-9V)/ 20mA| (=Signal output)| 9 … 32 VDC
0 … 5 VDC| > 2.5 kΩ| ≤ 20 mA| 9 … 32 VDC
1 … 6 VDC| > 5.0 kΩ| ≤ 20 mA| 9 … 32 VDC
0 … 10 VDC| > 5.0 kΩ| ≤ 20 mA| 15 … 32 VDC
0.5 4.5 VDC ratiom.| ≥ 5.0 kΩ| ≤ 20 mA| 5 (4.75… 5.25) VDC
Connection of the measuring equipment
Current output 2-wires
**Voltage output 3-wires
**
Pressure connection
**Mounting thread G1/2“ DIN EN ISO 1179-1
**
Adjustment of connector EN 175301-803 A
Only versions without Loctite securing of housing nut
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>