MAYTAG NAW120P Commercial Washer Instruction Manual

MAYTAG NAW120P Commercial Washer

Product Information

Specifications

• Approval Type: NAW120P
• Usage: Household and similar use (only for Europe)

Product Usage Instructions

Washer Safety
Your safety and the safety of others are very important. Please read and obey all safety messages provided in this manual and on your appliance. The safety alert symbol is used to alert you to potential hazards that can cause harm. All safety messages will be accompanied by the words DANGER or WARNING.

DANGER
You can be killed or seriously injured if you don’t immediately follow instructions.

WARNING

• You can be killed or seriously injured if you don’t follow instructions.
• All safety messages will provide information about potential hazards, how to reduce the chance of injury, and what can happen if the instructions are not followed.

Install Labels
NOTE: The Label Kit is only needed if the Washer is installed in Greece, Italy, or Hungary. Apply all Labels supplied in the Label Kit as instructed.

WARNING: Electrical Shock Hazard
Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock.

1. Locate the part number printed on the individual Labels provided in the Label Kit.

2. Reference the diagrams shown in these instructions on pages 8 to locate where the replacement Labels need to be installed on the Washer.
   NOTE: In some instances, multiples of the same Label are supplied due to multiple locations on the Washer for the same label.

3. Locate the existing Label on the Washer that the replacement Label will be installed over.

4. Wipe the surface of the existing Label to remove any dust or oils, using a clean cloth.

5. Remove the Label from the backer and install on top of the existing Label.
   NOTE: The replacement Label will be the same size and shape as the existing Label it will be installed over.

FAQ

• Q: When should I apply the Label Kit?
  A: The Label Kit is only needed if the Washer is installed in Greece, Italy, or Hungary. Apply all Labels supplied in the Label Kit as instructed.

• Q: What should I do to prevent electrical shock?
  A: Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock.

LABEL INSTALLATION INSTRUCTIONS

(ORIGINAL INSTRUCTIONS)

• COMMERCIAL WASHER (HOUSEHOLD AND SIMILAR USE ONLY FOR EUROPE)
• Approval Type: NAW120P

WASHER SAFETY

• Your safety and the safety of others are very important.
• We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

• This symbol alerts you to potential hazards that can kill or hurt you and others.
• All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:
  • DANGER You can be killed or seriously injured if you don’t immediately follow instructions.
  • WARNING You can be killed or seriously injured if you don’t follow instructions.
• All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

INSTALL LABELS

• NOTE: The Label Kit is only needed if the Washer is installed in Greece, Italy, or Hungary.
• IMPORTANT: Apply all Labels supplied in the Label Kit as instructed.

WARNING

• Electrical Shock Hazard
• Disconnect power before servicing.
• Replace all parts and panels before operating. Failure to do so can result in death or electrical shock.

1. Locate the part number printed on the individual Labels provided in the Label Kit.

2.  Reference the diagrams shown in these instructions on pages 8 to locate where the replacement Labels need to be installed on the Washer.
   NOTE: In some instances, multiples of the same Label are supplied due to multiple locations on the Washer for the same label.

3. Locate the existing Label on the Washer that the replacement Label will be installed over.

4. Wipe the surface of the existing Label to remove any dust or oils, using a clean cloth.

5. Remove the Label from the backer and install on top of the existing Label.
   NOTE: The replacement Label will be the same size and shape as the existing Label it will be installed over.

DIAGRAMS

• Located Inside Meter case (on models with meter case)
• W11559573 – Located Inside Cabinet on Drive Cover

©2023 All rights reserved.

Documents / Resources

| MAYTAG NAW120P Commercial Washer [pdf] Instruction Manual
NAW120P Commercial Washer, NAW120P, Commercial Washer, Washer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>