WARMTUYO Night Vision Goggles 4K Binoculars with Camera Instructions

WARMTUYO Night Vision Goggles 4K Binoculars with Camera

Product Information: Intelligent Infrared Night Vision Binoculars

Specifications

• Key Light Switch
• Menu Key
• Shutter/OK Button
• Power Key
• Playback
• Mode
• Zoom In/Infrared Increase
• Zoom Out/Infrared Decrease
• Screen
• Infrared Light
• Lens
• Focusing Gear
• Bracket hole
• Main Power Switch
• TF Card slot
• USB Port
• Lanyard Hole

Product Usage Instructions

Power On/Off & Charging

• The power master switch at the bottom of the product is at the OFF position when leaving the factory. To turn on the device, press the product button for 3-5 seconds. Press the same button for 3-5 seconds to turn it off. Do not turn off the power master switch after normal use, as it will reset the system settings and time to factory default. However, please turn off the power master switch when not using the product for a long time.
• Insert the TF card into the card slot according to the indicated direction. When using it for the first time, format the TF card.
• To charge the device for the first use, connect the power cord to a charger of 5V/1A or above. The red indicator light will be on during charging. After 6-8 hours, the red indicator light will turn off, indicating that the device is fully charged. The charging time may vary depending on the power output of the charger.

Function Keys

Power On/Off Button
To power on/off the device, press and hold the Power Button for 3 seconds. Upon powering on, it will default to video recording mode. Note: The power switch at the bottom of the product should be in the ON position.

Infrared Light Control
The two buttons have the following four functions: Starlight Mode, Infrared Brightness Adjustment, Zoom In, and Zoom Out. The default mode is daytime color.

When using at night

• Short press once to enter Starlight mode.
• Short press again to enter Infrared Light On mode.
• Continuously short press this button to increase the infrared light brightness in 9 levels, with the corresponding brightness level displayed on the screen.
• To decrease the brightness level, short press to step down the infrared brightness.

Notes

1. In the evening or at dusk in the city, it is recommended to use the daytime full-color mode for better clarity.
2. In outdoor low-light conditions at night, you can use the Starlight Mode.
3. In completely dark outdoor or indoor environments, use the Infrared Light On mode.
4. Adjust the infrared light brightness according to the distance. To save power, try not to use the highest brightness level for extended periods.

Zoom In/Out
To zoom in the image, press and hold the Zoom In/Infrared Increase button for 3 seconds. Continue holding the button to rapidly zoom in. To zoom out the image, press and hold the Zoom Out/Infrared Decrease button for 3 seconds. Continue holding the button to rapidly zoom out the image.

Photo / Video / OK Button
After powering on, the default mode is video recording mode. To start recording (in photo mode, to take a photo), simply press the Photo/Video/OK button. Press and hold the same button to zoom in or out on the image. The zoom level can be adjusted by continuing to hold the button.

FAQ

• Q: How do I turn on/off the device?
  A: To turn on the device, press and hold the Power Button for 3 seconds. To turn it off, press and hold the same button for 3 seconds.

• Q: How do I adjust the infrared light brightness?
  A: Short press the Infrared Light Control button to increase the brightness level. To decrease the brightness level, short press it again.

• Q: Can I use the device in low-light conditions?
  A: Yes, you can use the device in low-light conditions. It is recommended to use the Starlight Mode for outdoor low-light conditions at night.

• Q: How do I zoom in/out on the image?
  A: Press and hold the Zoom In/Out buttons for 3 seconds to progressively zoom in or out on the image. Continue holding the buttons to rapidly zoom in or out.

 Product Appearance and Keys Function

1. Key Light Switch
2. Menu Key
3. Shutter/OK Button
4. Power Key
5. Playback
6. Mode
7. Zoom In/Infrared Increase
8. Zoom Out/Infrared Decrease
9. Screen
10. Infrared Light
11. Lens
12. Focusing Gear
13. Bracket hole
14. Main Power Switch
15. TF Card slot
16. USB Port
17. Lanyard Hole

 Screen Icon Guide

Power on/off &Charging guidelines

1. Power Master Switch : The power master switch at the bottom of the product is at the “OFF” position when leaving the factory, and it is turned to “ON” when it is used for the first time. And at this time, the machine will not be turned on. Please press the product button for 3-5 seconds to turn on or off .
   Notes

   • Do not turn off the power master switch after normal use; if it is turned off manually, the system setting and time will both change to the factory default settings.
   • But please turn off the power master switch when you don’t use this product for a long time.

2. TF card : Please insert the TF into the card slot according to the direction indicated. When using it for the first time, format the TF card first.

3. USB charging port : For the first use, please connect the power cord to a charger of 5V/1A or above, and the red indicator light will be on; After 6-8 hours, the red indicator light will be off that means it is fully charged; The charging time will vary depending on the power output of the charger.

 Function keys

Power On/Off Button
Press and hold the Power Button for 3 seconds to power on/off. Upon powering on, it will default to video recording mode
Note : The power switch at the bottom of the product should be in the “ON” position

Infrared Light Control
These two buttons have a total of the following four functions: Starlight Mode/Infrared Brightness Adjustment/Zoom In /Zoom Out The default mode is daytime color.
When using at night : Short press once to enter Starlight mode, short press it again to enter Infrared Light On mode, and continue short pressing this button to increase the infrared light brightness in 9 levels, with corresponding brightness level displayed on the screen. To decrease the brightness level, short press to step down the infrared brightness.

Note :

1. In the evening or at dusk in the city, it is recommended to use the daytime full-color mode for better clarity.
2. In outdoor low-light conditions at night, you can use the Starlight Mode.
3. In completely dark outdoor or indoor environments, use the Infrared Light On mode.
4. Adjust the infrared light brightness according to the distance; to save power, try not to use the highest brightness level for extended periods

Zoom In/Out : Press and hold   for 3 seconds to progressively zoom in the image. Continue holding this button to rapidly zoom in. Press and hold for 3 seconds to progressively zoom out the image. Continue holding this button to rapidly zoom out the image .

Photo / Video / OK button

1. After powering on, the default mode is video recording mode. Once in video recording mode, to start recording (in photo mode, to take a photo), simply press the ****
2. Press and hold the to zoom in or out on the image. The zoom level will be displayed on the screen. Adjust the focus by rotating the focus wheel to achieve the clearest image on the screen.

MENU : Menu Key

Short press the MENU button: The system will display a menu. Use the buttons to navigate and select, then press ****button to the confirm and proceed to the next submenu .

: Key Light Button

Short press this button to turn on or off the key backlight

: Playback Button

Short press this button to enter playback mode, where you can view recorded videos and photos. Use and to select files. When you select a video file and want to watch it, press to start playback and press again to stop playback. In playback mode, you can also use the MENU button to access functions like file deletion and file locking.

MODE: ：Video/Photo Mode

Short press this button to switch between photo mode and video mode

1. After powering on, the default mode is video recording. Short press the MODE button to enter photo mode. In photo mode, press and hold the to zoom in or out on the image. The zoom level will be displayed on the screen. Adjust the focus by rotating the focus wheel to achieve the clearest image on the screen.
2. To start recording or taking a photo, align the lens with your target and adjust the focus for clarity. Press the ****button to begin recording, and press it again briefly  to stop recording.
3. When using at night, short press the button to enter Starlight Mode. Press it again to switch to Infrared mode. You can adjust the infrared brightness from level 1 to level 9, and press to decrease the brightness from high to low levels
4. Note : During video recording, audio is recorded simultaneously. However, when playing back video files using the device, there will be no sound. You can also set the screen protection time during video recording. When the memory is full, the device will automatically overwrite older recordings in a loop

Screen Brightness Display : You can adjust the screen brightness level using the MENU to your desired setting

 File download

1. Remove the TF card and use a card reader (Not Included) to connect it to your computer for file downloads.
2. To download and play files, connect the device to your computer using a USB cable.

 Menu Bar Setting

•   Video Resolution : 4K / 1080 FHD / 720P
• Resolution : 6M / 9M / 14M / 24M / 36M
• Language : Multilingual Support
• Time Setting : 2023-05-20 12:30:30
• Screen saver : off / 30s / 1 min / 2 min
• Screen Brightness : 7 Levels
• Auto Power Off : off / 1 min / 3 min / 5 min / 10 min
• Day Tag : on / off
• Frequency : 50 HZ / 60 HZ
• Night Vision Sensitivity : High / Med / Low
• Audio : on / off
• Default Setting : Cancel / OK
• Format : Cancel / OK
• Version :

 Important Notices

1. For the initial use of this product, please toggle the main power switch located inside the bottom silicone cover to ‘ON’ and leave it in the ‘ON’ position. For subsequent power on/off operations, please use the button on the top of the product.
2. Do not turn on the infrared light during daytime use.
3. After each use, please check if the device is powered off.
4. Regularly clean the surface of the display screen.
5. This product should not be submerged in water and should be protected from exposure to rain as much as possible.

 Product Specifications

hours
Infrared Light Power| 3.8W . 850nm. 9 levels
Power| 5V/1.0A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>