GAMESIR T4k Kaleid Transparent PC Controller User Manual

GAMESIR T4k Kaleid Transparent PC Controller

PACKAGE CONTENTS

GameSir-T4k 1
2m USB-C Cable 1
User Manual 1
Thank You & After-sale Service Card 1
Certification *1

REQUIREMENTS

• Switch
• Windows 10 or above
• Android 8.0 or above

DEVICE LAYOUT

AUTO-SLEEP AND WAKE-UP

1. When the controller is On, it will go to sleep automatically after 10 minutes of inactivity.
2. When the controller is On, it will go to sleep after the Home button is held for 5s.
3. When the controller goes to sleep mode, you can weak up the controller with either of thefollowing methods:

• press the Home/A/B/X/Y button.
• enable “Pick up to wake” setting in the “GameSir T4k App” software and pick up thecontroller.

MODE SWITCH

After the controller is connected to the device, the Home button will show the current modecolor when the M button is held.

A+Home = Android ( Blue) B+Home = DInput ( Purple)

X+Home = XInput ( Green) Y+Home = Switch ( Red)

CONNECT TO YOUR SWITCH VIA USB CABLE

1. Go to Switch’s HOME Menu, tap System Settings>Controller and Sensors>Pro Controller WiredConnection and set it to “On”. Insert the console into the Switch dock and power on.
2. Use the included USB-C cable to connect the controller to the Switch dock.
3. The Home button and LED strips flash red twice and turn to the user-set light effect, indicatinga successful connection.

*Normally, it will be automatically recognized as Switch mode (the Home button and LED strips flash red twice) when the controller is connected to the Switch dock. If they flash in other colors when connecting, you can change to the Switch mode by holding the Y+Home buttons for 2s.

CONNECT TO YOUR PC VIA USB CABLE

1. Use the included USB-C cable to connect the controller to the PC.
2. The Home button and LED strips flash green twice and turn to the user-set light effect, indicating a successful connection.

*Normally, it will be automatically recognized as PC mode (the Home button and LED strips flashgreen twice) when the controller is connected to the PC. If they flash in other colors when connecting, you can change to the PC mode by holding the X+Home buttons for 2s.

CONNECT TO YOUR ANDROID TV BOX VIA USB CABLE

1. Use the included USB-C cable to connect the controller to the Android TV box.
2. Hold the A+Home buttons for 2s. The Home button and LED strips flash blue twice and turntothe user-set light effect, indicating a successful connection.

Note: If you cannot control the Android TV box in Android mode, you can try holding the B+Homebuttons for 2s to switch to DInput mode. At this time, the Home button and LED strips flashpurple twice and turn to the user-set light effect, indicating a successful switch to DInput modeand connection.

BACK BUTTONS SETTINGS

No preset button values Programmable as single or multi-button (up to 12) Can be programmed to A/B/X/Y/LB/RB/LT/RT/L3/R3/BACK/START/Home/D-pad/Left Stick/Right Stick.

1. Set the L4/R4 button value: Hold the M+L4/R4 buttons simultaneously until the left/right LEDstrip flashes white slowly. Tap the button(s) you want to program to L4/R4 (single/multi-buttonsupported), then press the L4/R4 button. When the left/right LED strip returns to the user-set light effect, the L4/R4 button value is set.
   *For multi-button, the interval time of each button will be triggered according to the operationtime when programming.
2. Cancel the L4/R4 button value: Hold the M+L4/R4 buttons simultaneously until the left/right LED strip flashes white slowly, then press the L4/R4 button. When the left/right LED strip returns to the user-set light effect, the L4/R4 button value is canceled.
   *After 10s of inactivity within 10s when setting, the controller will automatically exit the settingmode and the button value will remain the same.

TURBO FUNCTION

4 gears in total, Slow 12Hz/Middle 20Hz/Fast 30Hz/Off Configurable buttons: A/B/X/Y/LB/RB/LT/RT

1. Turbo setup: Hold the M button, then press the button that needs a Turbo setup to enable theSlow gear Turbo. Repeat this operation to cycle through the Turbo gear (Slow, Medium, Fast, Off).
2. Clear all Turbo buttons: Double tap the M button.

BUTTON COMBINATIONS

After hair trigger mode is on,

1. The left/right LED strip will automatically light up when the LT/RT button is pressed.
2. Press M+LT/RT again to disable the hair trigger.

*The setup will still be saved after restart

M+D-pad’s Up/Down| Vibration intensity increase/decrease

5 gears, 1st gear vibration Off, 2nd 25%, 3rd 50%, 4th 75% (default), 5th 100%

*The setup will still be saved after restart

M+Left Stick’s Left/Right| Switch among 4 light effects

*The setup will still be saved after restart

M+Left Stick’s Up/Down| LED brightness increase/decrease

5 levels, default is the brightest

*The setup will not be saved after restart

Hold the M+A buttons for 3s| Interchange A-B, X-Y

*The setup will still be saved after restart

STICKS & TRIGGERS CALIBRATION

1. When the controller is off, hold the BACK+Home+START buttons until the USB-C cable is inserted into the PC’s USB port. The Home button will flash white slowly.
2. Ensure that LT & RT and the sticks are not touched. Then Press the A button. The Home buttonlight will go out.
3. Press LT & RT to their maximum travel 3 times.
4. Rotate the sticks at their maximum angles 3 times. Press the A button. The Home button light becomes solid white to indicate the calibration is over.
5. After the calibration is over, it’s required to unplug and replug the controller before using.

CUSTOMIZATION VIA “GAMESIR T4K APP” SOFTWARE

Download “GameSir T4k App” software at Microsoft Store or gamesir.hk on PC. Use the “GameSir T4k App” software to upgrade firmware and create 3 customprofiles. Theprofile includes button mapping, stick & trigger zones adjustment, vibration level control, light effects, etc.

*If the setting in the software is different from the manual one, the latest setting shall prevail andthe former will be directly overwritten.

References

• GameSir | The Global Leading Game Peripheral Brand – GameSir Official Store

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>