Lychico 1200M-U10 WiFi Extender Booster Installation Guide
- June 15, 2024
- Lychico
Table of Contents
Lychico 1200M-U10 WiFi Extender Booster Installation Guide
1. Product Overview
The Urant Wireless Router is connected to your router wirelessly,
strengthening its signal and expanding its coverage into areas that could not
otherwise be reached. The device also reduces signal interference to ensure
reliable Wi-Fi coverage throughout your home or office.
Easy Installation & Quick Position. The extender works with any standard
wireless router. Follow the Quick Setup instructions on the extender’s web
management page. Once the extender is connected to a router, you can relocate
it to your preferred location with no further configuration required. The
intelligent signal light can help to find the best location.
2. Appearance
3.LED Explanation
You can check the Wireless Router’s working status by following the LED Explanation table.
4.Port and Button Description
Repeater Mode
- Power On
Plug the Repeater into an electrical outlet next to your host router, and then wait until the 2.4G wireless and 5G wireless LED is on.
2) Set Up
Router Mode
Frequently Asked Questions(FAQ)
Q1. What can I do if the login window does not appear?
• If the computer is set to a static or fixed IP address, change the setting
to obtain an IP address automatically .
• Verify if http:/1192.168.168.1 is correctly entered
I in the web browser.
• Make sure your computer is connected to the Mini Router’s network.
• Use another web browser and try again.
• Reboot your router and try again.
• Disable the network adapter used currently and then enable it again.
Q2. What can I do if I cannot access the Internet?
• Check if the internet is working properly by connecting a computer directly
to the modem via Ethernet cable. If not,
connect your internet provider.
■ Reboot your router and try again.
Q3. How do I restore the router to its factory default setting?
■ While the router is powered on, press and hold the reset button on the rear
panel of the router for approximately
5 seconds.
Q4. Why set the repeater mode is unsuccessfully?
• You may have typed in the router’s wireless password incorrectly, please log
in and check the wireless password.
• The Mini router may be out of range, please move it closer to the router.
• Please reset the Mini Router and go through the configuration again.
A.If you need reset the extender. You need press and hold the reset button inside the tiny hole for 10 seconds .