DOLBY ATMOS HDMI2.0 Matrix 4×2 with Audio User Manual
- June 6, 2024
- DOLBY ATMOS
Table of Contents
HDMI2.0 Matrix 4×2 with Audio
User Manual
OVERVIEW
This Matrix 4×2 is 4 IN 2 OUT HDMI Matrix with Ultra HD up to 4K@60Hz 4:4:4 8bit HDR and HDCP2.2, support Dolby Vision and Dolby Atmos. It reliably distributes four HDMI source signals to two HDMI display devices, ideally uses for offices, schools, conference rooms, shopping malls, hotels, and museums, which require to distribution and switching multiple HDMI source signals to two HDMI display devices.
FEATURES
- Distributes four HDMI sources signal to two HDMI display devices. It supports 4K and 1080P output simultaneously.
- Supports HDMI 2.0 4K@60Hz 4:4:4 8bit HDR, HDCP 2.2
- Supports Dolby vision
- Supports EDID copy, multiple EDID settings for compatibility
- Supports 3D, Support deep color 30bit, 36bit
- Supports Blue-Ray 24/50/60fs/HD-DVD/xvYCC
- Supports HDMI signal re-timing, never lose quality
- support Dolby Atmos,Dolby HD Audio, and DTS HD audio;
- Plug and Play; No driver required; Installs in minutes
- Support remote control, button control
Remote control
The remote control can be used to turn on and off the matrix and switch the HDMI source for each output.
- Please remove the insulation slice before use.
- Please make sure the remote is pointed directly at the IR receiver window.
EDIT SETTING
SCALER SETTING
SPECIFICATIONS
- HDMI version: HDMI 2.0
- HDCP version: HDCP2.2
- HDMI resolution: 4K*2K/1080p/1080i/720p/576p/576i/480p/480i
- Support video format: 24bit/30bit,36bit deep color
- Support audio format: Dolby Atmos/Dolby true HD/DTSHD/LPCM7.1/Dolby-AC3/DSD
- Max bandwidth: 600MHz Max baud rate: 6Gbps
- Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL)
- Input/Output DDC signal: 5Volts p-p (TTL)
- Max working current: 1.5A
- Power adapter format: Input AC 100V-240V/ 50HZ,60HZ; Output: DC5V/2A
- Operating Temperature range: -15 to +55℃
- Operating Humidity range: 5 to 90%RH (No Condensation)
- Dimension (L x W x H): 1808416(mm)
- Weight: 380g
INSTALLATION
- Connect one cable from HDMI source devices to HDMI Matrix input.
- Connect one cable from each display (monitor or projector) to the HDMI Matrix outputs.
Note: To solve the HDCP issue, please press the output1 button for 3 seconds and the output1 LEDs flash 3 times.
Update
Please download Firmware Upgrade Tool at easycoolav.com, then refer to the
below Firmware Upgrade Instruction.
Baud Rate=57600bps, Data=8bit, Parity=None, Stop=1bit
Double click the UartAssist.exe. Set the correct parameters and click
Send a command <ISP 32 1> +Enter, then click
Running < STM Flash Loader Demo>
Select correct port and click
Select 128K and
Finish and re-start matrix
PACKING LIST
- HDMI Matrix x1
- Power Adapter x1
- Mounting Ear x2
- HOOK&LOOP x2
- Reusable Cable Tie x2
- User Manual x1
Trouble-shooting
-
Does not support HDMI 2.1 4K 120Hz, supports HDMI 2.0 1080P 120Hz.
-
To get UHD 4K60Hz/ HDR/ HDR Dolby Vision signal, please use 3~5 meter qualified HDMI2.0 AWG26 cable
-
Regarding flicking, blank picture issue, please press HDMI OUT 1 button for 3 seconds wait led flash 3 times to reset matrix.
-
HDMI matrix two outputs can down-scale 4K 60/50/30Hz to 1080P 60Hz ONLY separately, down-scale 4K to 1080P 60Hz ONLY, no another option.
DO NOT down-scale HDR Dolby Vision (4K60 4:2:2), VRR, otherwise SCREEN WASH out. -
Does not support converting HDR to SDR signal.
4K@60 4:4:4 8bit HDR, Scaler Output
Dolby Vision, Dolby Atmos
EZ-MX42HS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>