ROFAVEZCO EZ-EX70H2A HDMI Extender Over Ethernet User Manual
- June 15, 2024
- ROFAVEZCO
Table of Contents
ROFAVEZCO EZ-EX70H2A HDMI Extender Over Ethernet
OVERVIEW
HDBT Extender EZ-EX70H2A supports uncompressed HDMI 2.0 4K@60Hz 4:4:4 8bit, HDR, HDCP2.2; Supports bi-directional PoE, bi-directional IR, bi-directional RS232 and EDID management, CEC pass through. It provides distribution of uncompressed 3840 x 2160@60Hz 4:4:4 video, and Two-way IR up to 40m/130ft over a single Cat6a/7 cable; For 1080p@60Hz, it reaches up to 70/230ft over a single Cat6a/7 cable.
FEATURES
- Extend UHD HDMI signal to remote HDMI display up to 230ft/70m.
- Supports HDMI 2.0 4K@60Hz 4:4:4 8bit, HDR,HDCP 2.2
- EDID management. Easy to configure 4K/2K/pass-through
- CEC pass through.
- Supports HDMI 4K@60Hz 4:4:4 8bit, HDR up to 130ft/40m, 1080P@60Hz up to 230ft/70m via Cat5e/6a/7 cable.
- Support 3D, Support deep color 30bit, 36bit
- Supports Blue-Ray 24/50/60fs/HD-DVD/xvYCC
- Supports HDMI signal re-timing, never lose quality
- Supports HDMI input up to 10 meters AWG26 HDMI 2.0 standard cable length, output up to 15metres AWG24 cable length.
- Supports bi-directional PoE, one power adapter powers on TX and RX; Either TX powers on RX, or RX powers on TX .
- Supports bi-directional IR, either TV controls Blue-ray DVD, or DVD controls TV via IR remote; So easy to set up control system.
- Supports bi-directional RS232, easy to connect to control system.
- Dolby Digital Audio format, HDMI ports support Dolby Digital 7.1CH Audio; DTS-HD Master Audio/Dolby-AC3/DSD/LPCM, DTS:X, Atoms
- Multiple easy installations, include metal mounting ear, HOOK&LOOP
- Plug and Play; No driver required; Installs in minutes
SPECIFICATIONS
- HDMI version: Uncompressed HDMI 2.0
- HDCP version: HDCP2.2
- HDMI resolution: 4K*2K/1080p/1080i/720p/576p/576i/480p/480i
- Support video format: 4bit/30bit,36bit deep color
- Support audio format: Dolby true HD/DTS-HD/LPCM7.1/Dolby-AC3/DSD/DTS:X, Atoms
- Max bandwidth: 600MHz Max baud rate: 18Gbps
- Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL)
- Input/Output DDC signal: 5Volts p-p (TTL)
- Input cable distance: ≤10m AWG26, HDMI 2.0 standard cable
- Output cable distance: ≤15m AWG26, HDMI 2.0 standard cable
- Max working current: 200mA
- Power adapter format: Input AC 100V-240V/ 50HZ,60HZ; Output: DC24V/0.7A
- Operating Temperature range: -15 to +55℃
- Operating Humidity range: 5 to 90%RH (No Condensation)
- Dimension (L x W x H): 1206518(mm)
- Weight: 380g
INSTALLATION
- Connect HDMI cable from HDMI source devices to HDMI Extender input.
- Connect network/Ethernet cable from HDBaseT out (Transmitter) to HDBaseT input (Receiver).
- Connect HDMI cable from HDMI output (Receiver) to HDMI input on your display.
TROUBLESHOOTING
- POWER: Make sure all devices are powered on.
- INDICATOR: Check LED indicators of HDMI Extender Transmitter and Receiver are on. Please refer to below LED indicators description.
- DEVICES: Make sure picture can be shown normally when connecting HDMI source to display devices directly.
- HDMI CABLE: Plug in and out the HDMI 2.0 cable or change another HDMI cable. When transmitting HDMI 4K@60Hz (4:4:4) signal,HDMI 2.0 certificated cables is required.
- NETWORK CABLE:
- Please use Cat5e/6a/7 cable, dot suggests using Cat5.
- Make sure the CatX cable is less than 230ft for 1080p, 130ft for 4K.
- Make sure the two connectors of one CatX cable are the same standard (EIA/TIA 568B).
- COMPATIBILITY: Please test other sources and display devices to determine whether it is a compatibility issue.
- IR SIGNAL: Make sure the IR cables are correctly installed according to the diagram above. (IR Bi-direction Control)
- Check if the IR emitter head is secured over the center of the IR window of source device. This position maybe discrepant if you use different sources, try to adjust the position if the signal is weak. (or you can refer to the user manual of your source device to confirm the exact position of IR window)
- Pay attention to the control angle and distance as below: The control signal will be better when your controller is pointed at the IR receiver head directly.
PACKING LIST
- HDMI Extender Transmitter x1
- HDMI Extender Receiver x1
- Power Adapter x1
- IR Emitter x1
- IR Receiver x1
- Mounting Ear x2
- HOOK&LOOP x2
- Reusable Cable Tie x2
- User Manual x1
CONTACTS
When you need any technical assistance, please send an e-mail to
NOTES
Please use this machine based on the below instructions to keep a longer
lifetime.
- The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant environment.
- All parts will be free from the strong shake, hit, and fall.
- Touching the device with wet hands is prohibited.
- Please turn the power off when the machine is not used for a long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- Before power on, please check the connection cable carefully. And make sure that all interfaces are normally connected.
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any infringement of patents or other rights of third parties which may result from its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies that may be contained in this document. EZCOO TECHNOLOGY INC. also makes no commitment to update or to keep current the information contained in this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to this document and/or product at any time and without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>