MAYTAG E7EM Electric Furnace Owner’s Manual

MAYTAG E7EM Electric Furnace

Product Information

Technical Specifications

E7 Series Electric Furnaces
The E7 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free-standing in a utility room or enclosed in an alcove or closet. E7 Series furnaces are A/C ready, with 16 blower speeds to meet any cooling requirement.

Features and Benefits
E7EM Upflow/Downflow Electric Furnace

Model Identification

• E – Electric Furnace
• 7 – Seventh Series
• E – Constant Torque 16 Speed ECM Blower
• M – Upflow/Downflow
• 010 H – Primary Capacity: 10 kw
• 1 – Electrical Code: 240-1-60

Furnace Parts Identification

• 2 Pole Relay
• Transformer
• Control Board
• Circuit Breaker
• Limits
• Grounding Lug

Unit Specifications

Furnace Models| E7 Rated Heating Output, Btuh (see note 1)| Watts (Total kw, Heating Elements & Blower)| Supply Voltage| Heating Elements, No. (Total kw)| Motor Speed, H.P. Rating, Amps| Test ESP, in. w.c.| Optional Cooling| Optional Heat Pump| Air Filter (Standard)
---|---|---|---|---|---|---|---|---|---
010H| 35,000| 10.4| 240 Volts/60Hz/1-Phase| 2 (10.0)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
012H| 41,000| 12.0| 240 Volts/60Hz/1-Phase| 2 (11.6)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
015H| 53,000| 15.4| 240 Volts/60Hz/1-Phase| 3 (15.0)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
017H| 57,000| 16.6| 240 Volts/60Hz/1-Phase| 3 (16.2)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
020H| 70,000| 20.4| 240 Volts/60Hz/1-Phase| 4 (20.0)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
023H| 75,000| 22.0| 240 Volts/60Hz/1-Phase| 4 (21.6)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)

Electrical Specifications

Model Number| Supply Total Circuit Amperes| Maximum Over-Current Rating| Minimum Circuit Ampacity
---|---|---|---
E7E010H1| Single: 45.3
Dual A: 27.8
Dual B: 24.2| 60
35
35| 57
35
30
E7E012H1| Single: 51.6
Dual A: 45.3
Dual B: 20.8| 70
60
30| 65
57
26
E7E015H1| Single: 71.1
Dual A: 45.0
Dual B: 26.1| 90
60
35| 83
57
26
E7E017H1| Single: 86.9
Dual A: 45.3
Dual B: 41.7| 110
60
52| 109
57
52
E7E*020H1| Single: 93.6
Dual A: 45.3
Dual B: 48.0| 125
60
60| 117
57
60

Frequently Asked Questions (FAQ)

1. Can the E7 Series furnace be installed in a utility room?
   Yes, the E7 Series furnace can be installed free-standing in a utility room.

2. Can the E7 Series furnace be enclosed in an alcove or closet?
   Yes, the E7 Series furnace can be enclosed in an alcove or closet.

3. Are E7 Series furnaces A/C ready?
   Yes, the E7 Series furnaces are A/C ready.

4. What are the primary capacities available for the E7 Series furnace?
   The primary capacities available for the E7 Series furnace are 10 kw, 12 kw, 15 kw, 17 kw, 20 kw, and 23 kw.

5. What are the electrical specifications for each model of the E7 Series furnace?
   The electrical specifications for each model of the E7 Series furnace can be found in the table above.

Models

E7 Series Electric Furnaces
The E7 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free-standing in a utility room or enclosed in an alcove or closet. E7 Series furnaces are A/C ready, with 16 blower speeds to meet any cooling requirement.

FEATURES AND BENEFITS

• Choice of Air Conditioning Options: From 1.5 to 5 tons A/C ready.
• Easy Open Door: Secures the door firmly for transit, yet allows easy removal for access.
• Effective Air Filter: A universal disposable filter is readily available and simple to replace.
• Nichrome Heating Elements: Provide long-lasting, efficient heating.
• Appliance Quality Door: Protects against rust and other corrosion. The baked enamel finish allows for easy cleaning.
• Fully Insulated Furnace Cabinet: Insures minimized heat loss and quiet operation.
• Safety and Dependability: Auto reset controls protect the unit’s electrical circuitry and help ensure trouble-free performance. Built-in circuit breakers for extra safety.
• Adaptable: The unit can be adapted to provide dependable heating in either downflow or upflow mode.
• Versatile: Works with self-contained or split system air conditioners or heat pumps.
• Heating Relays: Provide quiet operation.
• Control Board: Allows for 16 blower speeds to create ideal comfort in the home.
• 7 Segment LED Display: Shows furnace mode and simplifies service.
• Upflow/Downflow Furnace (E7EM): Available to meet any application.
• Upflow (E7EU) and Downflow (E7ED) Furnace: Comes with a factory-installed coil box and all necessary filters.
• Full line of accessories to meet many difficult applications.

MODEL IDENTIFICATION

FURNACE PARTS IDENTIFICATION

UNIT SPECIFICATIONS

FURNACE MODELS E7-| 010H| 012H| 015H| 017H| 020H| 023H
---|---|---|---|---|---|---
Rated Heating Output, Btuh (see note 1)| 35,000| 41,000| 53,000| 57,000| 70,000| 75,000
Watts (Total kw, Heating Elements & Blower)| 10.4| 12.0| 15.4| 16.6| 20.4| 22.0
Supply Voltage| 240 Volts/60Hz/1-Phase
Heating Elements, No. (Total kw)| 2 (10.0)| 2 (11.6)| 3 (15.0)| 3 (16.2)| 4 (20.0)| 4 (21.6)
Motor Speed, H.P. Rating, Amps| 16 Speed, 1/2 HP, 3.6 A
Test ESP, in. w.c. Max| 0.3
Optional Cooling is Available with factory factory-installed blower| 2.0 – 4.0 Ton
Optional Heat Pump Available with factory-installed blower| 2.0 – 4.0 Ton
Air Filter (Standard)| 18″ x 20″ x 1″ (nominal)

Furnace Dimensions

| Multi-Poise| Width-20″ (508mm), Height-29″ (737mm), Depth-24 1/2″ (623mm)
Upflow/ Downflow| Width-20” (508mm), Height-60 5/8” (1546mm), Depth-24 1/2” (623mm)

1. Heating output rated at listed voltage. For outputs at voltages other than 240V, multiply the Btuh rating by the following factors: x 0.92 (230V), x 0.84 (220V), x 0.75 (208V)

ELECTRICAL SPECIFICATIONS

*MODEL NUMBER E7E-| **

SUPPLY CIRCUIT

| ****

TOTAL AMPERES

| MAXIMUM OVER- CURRENT RATING| MINIMUM CIRCUIT AMPACITY
---|---|---|---|---
010H1| Single| 45.3| 60| 57

012H1

| Single| 51.6| 70| 65
Dual “A”| 27.8| 35| 35
Dual “B”| 24.2| 35| 30

015H1

| Single| 66.1| 90| 83
Dual “A”| 45.3| 60| 57
Dual “B”| 20.8| 30| 26

017H1

| Single| 71.1| 90| 89
Dual “A”| 45.0| 60| 56
Dual “B”| 26.1| 35| 33

020H1

| Single| 86.9| 110| 109
Dual “A”| 45.3| 60| 57
Dual “B”| 41.7| 60| 52

023H1

| Single| 93.6| 125| 117
Dual “A”| 45.3| 60| 57
Dual “B”| 48.0| 60| 60

NOTE:
Wire size must be in accordance to the applicable revision of the NEC and all other applicable codes.

Anticipator Settings

Clearances

• Service Clearance
• For upflow application using an upflow stand, 1″ minimum per side.

Dimensions

Optional Accessories

Coil Box| Dimension A Width (mm)| Dimension B Depth (mm)| Dimension C Height (mm)
---|---|---|---
1006730| 20″ (508mm)| 24″ (610mm)| 31.5″ (802mm)
1006731| 20″ (508mm)| 24″ (610mm)| 31.5″ (802mm)
904067| 20″ (508mm)| 24″ (610mm)| 27″ (686mm)
902976| 20″ (508mm)| 24″ (610mm)| 29″ (736mm)

AIRFLOW DATA

AIRFLOW (CFM)

MODEL NUMBER

| MOTOR SWITCH SETTINGS (0=OFF, 1=ON)| EXTERNAL STATIC PRESSURE (IN. W.C.)
0.1| 0.2| 0.3| 0.4| 0.5| 0.6
1/5| 2/6| 3/7| 4/8| CFM| CFM| CFM| CFM| CFM| CFM

E7E*-0**H1

| 0| 0| 0| 0| 685| 640| 606| 560| 513| 460
1| 0| 0| 0| 770| 727| 692| 648| 599| 552
0| 1| 0| 0| 854| 815| 779| 737| 685| 645
1| 1| 0| 0| 939| 902| 865| 825| 771| 737
0| 0| 1| 0| 1,012| 974| 938| 899| 850| 813
1| 0| 1| 0| 1,084| 1,047| 1,011| 973| 930| 888
0| 1| 1| 0| 1,157| 1,119| 1,084| 1,047| 1,009| 964
1| 1| 1| 0| 1,197| 1,166| 1,130| 1,093| 1,056| 1,017
0| 0| 0| 1| 1,245| 1,215| 1,178| 1,143| 1,105| 1,066
1| 0| 0| 1| 1,293| 1,263| 1,225| 1,192| 1,154| 1,114
0| 1| 0| 1| 1,344| 1,312| 1,278| 1,242| 1,206| 1,169
1| 1| 0| 1| 1,394| 1,361| 1,330| 1,291| 1,257| 1,223
0| 0| 1| 1| 1,434| 1,401| 1,369| 1,332| 1,299| 1,267
1| 0| 1| 1| 1,473| 1,441| 1,408| 1,373| 1,340| 1,311
0| 1| 1| 1| 1,514| 1,483| 1,451| 1,417| 1,386| 1,355
1| 1| 1| 1| 1,555| 1,525| 1,494| 1,460| 1,431| 1,398

NOTES:

1. Motor switch settings for heating speeds use HEAT switches 1, 2, 3, and 4. For cooling speeds use COOL switches 5, 6, 7, and 8.
2. Data is shown with filter

E7 Airflow Data

*E7E- 0H1

| MAXIMUM HEATING AIRFLOW SETTING
---|---
E7EM| E7ED| E7EU
DOWNFLOW| UPFLOW| DOWNFLOW| UPFLOW
MH| RES| MH| RES| MH| RES| MH| RES
10| ****

0001

| 0101| 0001| ****

0101

| ****

0101

| ****

0101

| ****

0101

| ****

0101

12| 0011| ****

0101

15| ****

0101

17
20
23| 0011| 0001| 0011| 0001| 0011

NOTES:

1. MH and Res represent Manufactured Housing and Residential (modular home) applications, respectively
2. To comply with government-mandated efficiency standards, speed settings with higher CFM values than listed in this table are not allowed in HEAT mode

ACCESSORIES

ACCESSORY KITS

GENERAL TERMS OF LIMITED WARRANTY

For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the Nortek Global HVAC, LLC warranty department for a copy. Before purchasing this appliance, read important energy cost and efficiency information available from your retailer. Specifications and illustrations are subject to change without notice and without incurring obligations. Printed in U.S.A. (10/22)

®/TM/© Maytag. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, Missouri, USA. Limited warranty provided by the manufacturer. © Nortek Global HVAC, LLC. All rights reserved. www.maytaghvac.com.

492F-1022 (Replaces 492F-0122)

References

• TCPDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>