NINO TRADING 2BDOH-NBC Outputs Marine Bluetooth Controller Instructions

NINO TRADING 2BDOH-NBC Outputs Marine Bluetooth Controller

Product Information

Specifications:

Product Usage Instructions

Bluetooth Mode:

1. When the input device is playing music, press the button to pause. Press it again to resume playback.

AUX Mode:

1. In this mode, when you are playing music from an input device, press the button to mute the sound. Press it again to control the volume.

Bluetooth Mode / AUX Mode:

1. When the input device is playing music, press Key 1 to play the last song. Press Key 2 to play the next song.

Power Supply and Bluetooth / AUX Switch:

1. After powering on, press Key 3 for 2 seconds to switch between Bluetooth and AUX modes.
2. By default, the device enters Bluetooth mode after booting up. The background light will start flashing.
3. Double-click the button to switch to AUX mode. This will automatically disconnect Bluetooth and change the background light color.

Main Volume Control / Mute:

1. The knob can control the volume of any output interface (RCA 1 / RCA 2) in any mode (Bluetooth / AUX).
2. In any mode, press the knob button to mute the sound. Press it again to remove the mute.

SUB Volume Control:

1. Key 5 controls the volume of SUB output.
2. Key 6 increases the volume of SUB output.

FAQ

• Q: Is this device compliant with FCC regulations?
  A: Yes, this device complies with Part 15 of the FCC Rules. It does not cause harmful interference and accepts any interference received.

• Q: Can I modify this device?
  A: No, any changes or modifications to this unit not expressly approved by the responsible party may void the user’s authority to operate the equipment.

• Q: Can I use this device with other antennas or transmitters?
  A: No, this device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

• Q: What is the recommended distance to maintain from the body?
  A: To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm from the body.

Overview

Overview of the controller panel functions

Key and knob function details

Press button 4: Play the pause button

• Bluetooth mode:

1. When the input device music is played, press is pause and press again is play; when the input device music is suspended, otherwise.

• AUX pattern:

1. In this mode, when you input the device sound. When playing music, press to mute, and then control the uddouya class.

Key 1 / Key 2: last song / next song

• Bluetooth mode / AUX mode:

1. When the input device music plays / uses, press and switch the last/next song;

Press button 3: Power supply, Bluetooth / AUX switch

1. After power on, press 2S for the first time.
2. Enter the Bluetooth mode by default after boot Type 1, this key background light starts to flash Shuo; connect the background light often on.
3. Double-click the button to switch over the AUX mode.
   Type 1, automatically disconnect Bluetooth, button background light switch color; Five on the 2nd work.

Knob: main volume control/mute

1. Control any mode (Bluetooth / AUX), the volume of any output interface (RCA 1 / RCA 2);
2. In any mode, press the knob button to realize the mute function, and press again to remove the mute;

Key 5 / Key 6: SUB volume- – – / SUB sound measure +

1. Control the volume of RCA 2 output in any mode.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>