vivitek DW771USTie High Brightness WXGA UST Projector with Finger And Pen Touch User Guide

: June 15, 2024
: vivitek

Table of Contents

vivitek DW771USTie High Brightness WXGA UST Projector with Finger And Pen
Product Information
Product Usage Instructions
ULTRA SHORT-THROW Interactive 3D PROJECTOR
Features
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

vivitek DW771USTie High Brightness WXGA UST Projector with Finger And Pen

Touch

Product Information

Specifications

Display Type: Single Chip 0.65 DLP Technology by TI
Brightness : 3,500 ANSI Lumens
Native Resolution: WXGA (1280 x 800)
Contrast Ratio: 5,000:1
Light Source Life/Type : 5,000/10,000/12,000 Hours (Normal/Eco. Mode/Dynamic Eco. Mode), 240W/170W
Throw Ratio : 0.35:1
Image Size (Diagonal): 80 – 100 inches
Projection Distance : 605mm -755mm
Projection Lens : Manual Focus
Zoom Ratio : Fixed
Aspect Ratio : 16:10 Native
Offset Keystone Correction
Horizontal Frequency: 15, 31 – 91.4kHz
Vertical Scan Rate : 24 – 30Hz, 47 – 120Hz
Interactive Functionality: Yes (via Camera) (Finger Touch and Pen Based Control) (Requires DT02 Kit)
3D Functionality: Yes (Supports DLP Link, Blu-Ray 3D)
Audio Speakers: 10W (x2)
Projection Method: Table Top or Ceiling Mount (Front or Rear)
Uniformity : 85%
Computer Compatibility: VGA, SVGA, XGA, SXGA, SXGA+,WXGA, UXGA@60hz, Mac
Video Compatibility: UHD / HDTV (720p, 1080i, 1080p) / EDTV (480p, 576p) / SDTV (480i, 576i) / NTSC (M,3.58/4.43 MHz), PAL (B,D,G,H,I,M,N) SECAM (B,D,G,K,K1,L)
I/O Connection Ports
- HDMI 2.0 (x2)
- VGA-Out
- VGA-In
- RJ-45
- Composite Video
- RS-232
- Audio-In RCA (L/R)
- USB mini-B (Interactive)
- Mini-Jack USB A (Power) 5V/1.5A
- Audio-Out (Mini-Jack)
- USB B (Service Only)
Security
Weight: 11lbs (5.0 kg)
Dimensions (W x H x D ): 11.3 x 4.9 x 14.7 inches (287.7 x 126.6 x 374.5 mm)
Noise Level : 34dB/29dB (Normal / Eco. Mode)
Power: Supply : AC 100-240V, 50/60Hz
Consumption : 250W (Eco Mode), 290W (Normal Mode)
Operating Temperature
Warranty
Standard Accessories
Optional Accessories
UPC

Product Usage Instructions

Installation

Choose a suitable location for the projector, ensuring it is within the desired projection distance and angle.
If mounting on a wall or ceiling, use appropriate brackets and follow the instructions provided.
Connect the necessary cables, such as HDMI, VGA, and audio cables, to the corresponding ports on the projector.
If using interactive functionality, connect the USB mini-B cable to the interactive port on the projector and the computer.
Ensure the power supply is connected to the projector and a power outlet.
Turn on the projector using the power button.

Projection

Adjust the focus of the projection lens to achieve a clear image.
Select the desired input source using the remote control or the buttons on the projector.
Use the keystone correction feature if necessary to align the image properly.
Adjust the zoom ratio if needed to enlarge or reduce the size of the projected image.

Interactive Functionality
To utilize the interactive functionality of the projector, follow these steps

Ensure that the DT02 Kit is connected to the projector (if required).
Calibrate the interactive feature by following the on-screen instructions.
Use your finger or the pen (if provided) to interact with the projected image.
Save or export any changes or annotations made during the interactive session.

Lamp Replacement

Ensure the projector is turned off and has cooled down for at least 30 minutes.
Locate the top-loading cover on the projector.
Open the cover carefully to expose the lamp compartment.
Remove the old lamp by gently pulling it out.
Insert the new lamp into the compartment, making sure it is securely in place.
Close the cover and secure it.

FAQ

Q: How long does the lamp last?
A: The lamp can last up to 12,000 hours in Normal/Eco. Mode/Dynamic Eco. Mode.
Q: Can I use this projector for 3D content?
A: Yes, the projector supports 3D content and is compatible with DLP Link and Blu-Ray 3D technology.
Q: How do I connect external devices to the projector?
A: The projector has various connection ports including HDMI, VGA, composite video, and USB ports. Use the appropriate cables to connect your devices to the corresponding ports on the projector.

ULTRA SHORT-THROW Interactive 3D PROJECTOR

DW771USTie

High brightness WXGA UST projector with finger and pen touch IWB advantage, 4K compatible

Features

DLP® and BrilliantColor™ technologies by Texas Instruments for sharp and detailed image quality
3,500 lumens of brightness with a 5,000:1 contrast ratio
Native WXGA (1280 x800) resolution disaplay up to UHD (3840 x 2160) @60Hz
4K incoming signal compatibe
10-point finger touch and pen enabled IWB functionality (Required DT02 Kit)*
Ultra short-throw to limit shadows and light glare
High-efficient lamps that last up to 12,000 hours (Dynamic Eco mode)
3D-ready via DLP® Link™, and Blu-Ray 3D functionality
Full Connectivity options include: Two (2) HDMI 2.0, VGA and Composite video
VGA-Out for display on secondary monitor
Total 20W (10W x2) audio power with audio-in and audio-out ports for external device connection
RJ45/RS-232 for integration and system administration
Network ready and Crestron® RoomView™ approved for network monitoring and management
Sealed optical engine to minimize the impact of dust
Top-loading, cover for quick and easy lamp replacement

Specifications

Supply: AC 100-240V, 50/60Hz
Consumption: 250W (Eco Mode), 290W (Normal Mode), <0.5W (Standby Mode)

Operating Temperature| 41 to 104°F (5 to 40°C)
Warranty| 5-Year Limited Parts/Labor, 1-Year on Lamp
Standard Accessories| AC Power Cord, VGA Cable, Interactive Pen (x2), Remote Control, Batteries for Remote, User Manual (CD), Warranty Card, Wall Mount (%WM-3)
Optional Accessories| Spare Lamp P/N (N/A)
Remote Control P/N (N/A)
UPC| 813097024275