SUNNY HEALTH FITNESS SF-B223012 Full Body Foldable Magnetic X-Bike User Manual

SUNNY HEALTH FITNESS SF-B223012 Full Body Foldable Magnetic X-Bike

IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.

1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 300 lbs (135 kgs).
10. The equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.
12.  Your product is intended for use in cool, dry conditions. You should avoid storage in extreme cold, hot, or damp areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only; it is not intended for commercial use.

PRE-ASSEMBLY CHECKLIST

Before you start to assemble, please make sure all parts are included

No.| Description| Spec.| Qty.| | No.| Description| Spec.| Qty.
---|---|---|---|---|---|---|---|---
1| Front Main Frame Post| | 1| 30| Seat| | 1
2| Rear Support Frame| | 1| 91| Back Seat Post| | 1
3| Front Stabilizer| | 1| 92| Back Seat Connect Post| | 1
4| Rear Stabilizer| | 1| 93| Mesh Cushion| | 1
5| Seat Support Post| | 1| 97| Round Knob| M8*20| 1
6| Handlebar Connect Post| | 1| 99| Rear Handlebar Post| | 1
7| Front Handlebar Post| | 1| 100| Handlebar Cover| | 1
12| Computer| | 1| 104| Rope Group| | 2
22| Bottle Cover| | 1| A| Hardware Package| | 1
23| Left Bottle Cover| | 1| B| Thank You Card| | 1
24| Right Bottle Cover| | 1| C| Manual| | 1
28| Left Pedal| | 1| D| Battery| AAA| 1
29| Right Pedal| | 1| | | |

HARDWARE PACKAGE

Ordering Replacement Parts (U.S. and Canadian Customers only)

Please provide the following information in order for us to accurately identify the part(s) needed:

• The model number (found on cover of manual)
• The product name (found on cover of manual)
• The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the end of the manual)

Please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

ASSEMBLY INSTRUCTIONS

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

• STEP 1: Pull the Ring Spring Pin (No.53) out and open the Rear Support Frame (No.2) and the Front Main Frame Post (No.1) as the direction of the arrow shown in Figure. Insert the Ring Spring Pin (No.53) into the hole A in the steel plate of the Front Main Frame Post (No.1).
• STEP 2: Attach the Front Stabilizer (No. 3) to the Front Main Frame Post (No. 1) with 2 Bolts (No. 33) and 2 Big Curve Washer (No. 15), 2 Nuts (No. 16). Tighten and secure with Spanner (No. 113). Attach the and Rear Stabilizer (No. 4) to the Rear Support Frame (No. 2) with 2 Bolts (No. 33) and 2 Big Curve Washer (No. 15), 2 Nuts (No. 16). Tighten and secure with Spanner (No. 113).

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

• STEP 3: Remove 6 Bolts (No. 17), 4 Curve Washers (No. 18) and 2 Washers (No.19) from the Handlebar Connect Post (No. 6) with Allen Wrench (No. 115).
  Attach the Bottle Cover (No. 22) into the Handlebar Connect Post (No. 6). Connect the Computer Wire II (No. 20) with Computer Wire I (No. 26). Then insert it into the Rear Support Frame (No. 2). Attach the Handlebar Connect Post (No. 6) to the Rear Support Frame (No. 2) with 6 Bolts (No. 17), 4 Curve Washers (No. 18) and 2 Washers (No.19) that were removed. Tighten and secure with Allen Wrench (No. 115).

• STEP 4: Attach the Left Bottle Cover (No. 23) and Right Bottle Cover (No. 24) to the Rear Support Frame (No. 2) with 4 Screws (No. 25), 1 Screw (No. 11). Tighten and secure with Spanner (No. 113). Lower the Bottle Cover (No. 22) to fit in the Left Bottle Cover (No. 23) and Right Bottle Cover (No. 24).

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

• STEP 5: Attach the Front Handlebar Post (No. 7) to the Handlebar Connect Post (No. 6) with 2 Square Neck Bolts (No. 14), 2 Big Curve Washer (No. 15), 2 Nuts (No. 16). Tighten and secure with Spanner (No. 113).
• STEP 6: Remove 3 Washers (No. 31), 3 Nuts (No. 32) from the Seat (No. 30) with Spanner (No. 113) Attach the Seat (No. 30) to the Seat Support Post (No. 5) with 3 Washers (No. 31), 3 Nuts (No. 32) that were removed. Tighten and secure with Spanner (No. 113). Loosen and pull out 1 Spring Pin Knob (No. 27) in the Front Main Frame Post (No. 1) by hand. Attach the Seat Support Post (No. 5) into the the Bushing (No. 39) which is in the Front Main Frame Post (No. 1) with 1 Spring Pin Knob (No. 27) that was loosen. Tighten and secure by hand. Attach the Back Seat Post (No. 91) to the Seat Support Post (No. 5) with 2 Bolts (No. 98) 2 Washers (No. 31), 2 Nuts (No. 16). Tighten and secure with Spanner (No. 113).

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

• STEP 7: Attach the Rear Handlebar Post (No. 99) to the Back Seat Post (No. 91) with 1 Handlebar Cover (No. 100) 2 Washers (No. 31), 2 Bolts (No. 103). Tighten and secure with Allen Wrench (No. 112).
• STEP 8: Attach the Mesh Cushion (No. 93) to the Back Seat Connect Post (No. 92) with 2 Washers (No. 111), 2 Bolts (No. 95). Tighten and secure with Spanner (No. 113). Attach the Back Seat Connect Post (No. 92) to the Back Seat Post (No. 91) with 1 Washer (No. 31), 1 Bolt (No. 96) 1 Nut (No. 16). Tighten and secure with Allen Wrench (No. 112) and Spanner (No. 113). take the 1 Round Knob (No. 97) to the Back Seat Post (No. 91). Tighten and secure by hand.

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

• STEP 9: Keep Left Pedal (No. 28) and Left Crank (No. 87) at 90 °and then gently insert Left Pedal (No. 28) into the c Left Crank (No. 87), then turn the Left Pedal (No. 28) counter-clockwise as tightly as you can with your hands, then use Spanner (No. 113) to tighten securely. Keep Right Pedal (No. 29) and Right Crank (No. 88) at 90° and gently insert Right Pedal (No. 29) into the Right Pedal (No. 29). Then turn the Right Pedal (No. 29) clockwise as tightly as you can with your hands, then use Spanner (No. 113) to tighten securely.
• STEP 10: Remove 4 Pan Screws (No. 13) from the back of the Computer (No. 12) with the Spanner (No. 113). Attach Computer (No. 12) to the top end of the Front Handlebar Post (No. 7) with 4 Pan Screws (No. 13) that were removed. Tighten and secure with Spanner (No. 113). Connect the Computer Wire II (No. 20) with Computer Wire A (No. 12a).
  NOTE: Computer Wire A (No. 12a) has to go through the hole in the middle Front Handlebar Post (No. 7) Connect the wire in the back of the Front Handlebar Post (No. 7) Insert the Hand Pulse Sensor with Wire (No. 10) into the Pulse Input jack on the back of Computer (No. 12).

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

• STEP 11:
  Attach 2 Plastic Pulley Blocks (No. 106) to the Swivel blocks (No. 109) which is in the Rear Stabilizer (No. 4) with 2 Bolts (No. 107), 2 Washers (No. 19), 2 Nuts (No. 108). Tighten and secure with Allen Wrench (No. 115) and Spanner (No. 114). Attach2 Gourd Hooks (No. 105) into two hooks in the below of Rear Handlebar Post (No. 99) Attach 2 Rope Groups (No. 104) to the Rear Handlebar Post (No. 99) The assembly is complete!

STORAGE GUIDE

• Pull the Ring Spring Pin (No.53) out and fold the Rear Support Frame (No.2) to the Front Main Frame Post (No.1) as the direction of the arrow shown in Figure.
• Turn the Round Knob (No.97) out and fold the Back Seat Connect Post (No.92) to the Rear Support Frame (No.2) as the direction of the arrow shown in Figure.
• Insert the Ring Spring Pin (No.53) into the hole A in the steel plate of the Front Main Frame Post (No.1).
• Turn the Round Knob (No.97) into the Back Seat Connect Post (No.92).

WARNING: WATCH OUR HANDS WHEN YOU FOLD THE BIKE.

ADJUSTMENTS GUIDE

**| MOVING THE RECUMBENT BIKE**

Hold the Front Handlebar Post (No. 7) and tilt the bike until the 2 Transportation Wheels (No. 36) touch the ground. Now you can transport the bike to the desired location with ease.

---|---
**| ADJUSTING THE BALANCE**

In order to achieve a smooth and comfortable ride, you must ensure that the bike is stable and secured. If you notice that the bike is unstable during use, you should adjust the Rear Stabilizer End Caps (No. 37) until the bike becomes levelled with the floor surface.

**| ADJUSTING THE TENSION**

Adjust the tension by rotating the Tension Control Knob (No. 45) clockwise to increase the level of resistance. Rotate the Tension Control Knob (No. 45) counter-clockwise to decrease the level of resistance.

Tension levels are set at Level 1 being the lowest

and Level 14 being the highest.

**| ADJUSTING THE SEAT**

Loosen and pull out the Spring Pin Knob (No. 27) to adjust the height of the Seat (No. 30). When adjusting, you will see a limit on the Seat Support Post (No. 5). DO NOT lift the posts passed this mark. Always check the Spring Pin Knob (No. 27) and to ensure that they are fully secured when you

finish making an adjustment.

CLEANING

The bike can be cleaned with a soft, clean, damp cloth. Do not use abrasives or solvents on plastic parts. Please wipe your perspiration off the recumbent bike after each use. Be careful not to get excessive moisture on the computer display panel as this might cause electrical hazard or electronics to fail. Please keep the bike, especially the computer, out of direct sunlight to prevent screen damage. Please inspect all assembly bolts and pedals on the recumbent bike for proper tightness every week.

STORAGE

Store the recumbent bike in a clean and dry environment, away from children.

BATTERY INSTALLATION & REPLACEMENT

BATTERY INSTALLATION

1. Take out 2 AAA batteries from computer box.
2. Press the buckle of battery cover on the Computer (No. 12), then remove battery cover.
3. Install 2 AAA batteries into the battery case on the back of the Computer (No. 12). Pay attention to the battery + and – poles before installing.
4. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 12).

The installation is complete!

BATTERY REPLACEMENT

1. Press the buckle of battery cover on the back of the Computer (No. 12), then remove battery cover.
2. Remove the 2 old AAA batteries in the battery case and install 2 new AAA batteries into the battery case on the back of the Computer (No. 12). Pay attention to the battery + and – poles before installing.
3. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 12).

The replacement is complete!

BATTERY DISPOSAL

Dispose the batteries according to the laws and regulations of your local region. Some batteries may be recycled. When disposing or recycling, do not mix battery types.

EXERCISE COMPUTER

KEY FUNTION:

• This key lets you to select and lock on to a particular function you want. SCAN→TIME→SPD →DIST →CAL→ ODO →RPM →PULSE
• Pressing and hold with 3 seconds to reset the value to zero (without ODO).

SLEEP MODE

• The system turns off automatically when the sensor has no signal input or no key are pressed for approximately 4 minutes.
•  The system turns on when the MODE key is depressed or a signal input from the sensor.

FUNCTION

•  SCAN: Display changes according to the next diagram every 6 seconds.
•  TIME: The total working time with starting exercise.
•  SPD: The current speed with starting exercise.
•  DIST: The current distance with starting exercise.
•  CAL: The current calories burned with starting exercise.
•  ODO: Counts the total distance with from start to finish. If the battery is replaced, the value returns to zero.
•  RPM: The average number of turns per minute of the wheel to measure the speed of the pedal.
•  PULSE: The current pulse rate.

SPECIFICATIONS

FUNCTION

| SCAN| 6 S
---|---|---
TIME| 0:00-999:59     M：S
SPEED| 0.0~99.99 M/H
DIST| 0.0~9999.9 M
ODO| 0.00~9999.9 M
CAL| 0.0~9999.9 Kcal
RPM| 0~299
PULSE RATE| 40~240 BPM
BATTERY| SIZE-AAA*2
Operating temperature| 0~40℃(32℉-104℉)
Storage temperature| -10~60℃((14℉-140℉)

APP CONNECTION:

1. Scan the QR code below to download the SunnyFit app onto your mobile device.
2. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in.
3. Ensure that the Bluetooth function is turned on from your mobile device.
4. To connect the equipment to the SunnyFit app:
   • From the “Workout” tab, press on the “Search” button to search for your equipment.
   • Once your equipment appears on the list, tap the “Select” button to confirm.
   • Note: If your equipment does not appear on the “Searching for Equipment” list, check the EXERCISE COMPUTER on your equipment to ensure that it is not in sleep mode and your phone’s Bluetooth function is on, then tap “Retry” to search again.
   • Once your equipment shows up on the “Workout” tab as “Currently Selected”, your equipment is now ready to display, track, and record your equipment’s workout stats on the app!
5. If you are unable to replicate these steps, or have any other issues with the SunnyFit app, please contact SunnyFit support at support@sunnyfit.com, or use the in-app “Contact Us” form to request support (“Me” tab -> “Contact Us”).

EXPLODED DIAGRAM

EXPLODED DIAGRAM 1

EXPLODED DIAGRAM 2

TROUBLESHOOTING

There is no display on the computer.

| 1.       Remove the computer and verify that the wire from the computer is properly connected to the wire that comes from the front post.

2.       Check if the batteries are correctly positioned and battery springs are in proper contact with batteries.

3.       The batteries in the computer may be unresponsive. Change to new batteries.

The bike wobbles when in use.

| Turn the adjustable end caps on the front and rear stabilizers as needed to level the bike.

The bike makes squeaking noise when in use.

| Some bolts on the bike might have become loose. Please inspect all the bolts and tighten

any loose bolts.

PARTS LIST

No.| Description| Spec.| Qty| | No.| Description| Spec.| Qty
---|---|---|---|---|---|---|---|---
1| Front Main Frame Post| | 1| 34| Cap| | 2
2| Rear Support Frame| | 1| 35| Bolt| M8*40| 2
3| Front Stabilizer| | 1| 36| Transportation Wheel| Ф 8Ф161.5| 2
4| Rear Stabilizer| | 1| 37| Rear Stabilizer End Cap| | 2
5| Seat Support Post| | 1| 38| Seat Post| | 1
6| Handlebar Connect Post| | 1| 39| Bushing| | 1
7| Front Handlebar Post| | 1| 40| Plastic Shaft Sleeve| φ30φ22L12| 6

8

| Front Handlebar Foam

Grip

| | 2| ****

41

| ****

PC Pad

| | 1
9| Round Cap| | 4| 42| Wire Plug I| | 2

10

| Hand Pulse Sensor with

Wire

| ****

L=550mm

| 2| ****

43

| ****

Screw l

| ****

M8*20

| 6
11| Screw| ST4.2*20| 3| 44| Spring Washer| Φ8| 6

12

| ****

Computer

| ****

HT060

| 1| ****

45

| Tension Control

Knob

| ****

1150mm

| 1
12a| Computer wire A| | 1| 46| Big Flat Washer| Φ5Φ151.0| 1
13| Pan Screw| M510| 5| 47| Bolt| | 1
14| Square Neck Bolt| M840| 2| 48| Seat Support Block| | 1
15| Big Curve Washer| φ8φ202.0| 6| 49| Screw| M58| 1
16| Nut| M8| 9| 50| Bolt| M820| 2
17| Bolt| M612| 6| 51| Big Flat Washer| Φ8Φ252.0| 2
18| Curve Washer| φ6| 4| 52| Mandrel| | 1
19| Washer| Φ6Φ161.2| 2| 53| Ring Spring Pin| Φ8108| 1
20| Computer Wire II| L=200MM| 1| 54| Shaft Circlip| Φ17| 6
21| Wire Plug II| | 1| 55| Bolt| M612| 6
22| Bottle Cover| | 1| 56| Plastic Bearing Seat| | 2
23| Left Bottle Cover| | 1| 57| Bearing| 6003ZZ| 2
24| Right Bottle Cover| | 1| 58| Flywheel| Φ165| 1
25| Screw| ST4.215| 8| 59| Magnetic Plate Post| | 1
26| Computer Wire I| L=950MM| 1| 60| Washer| Φ5Φ121.0| 1
27| Spring Pin Knob| | 1| 61| Magnet| 20208| 8
28| Left Pedal| YH-30X| 1| 62| Square Magnet| 20105| 3
29| Right Pedal| YH-30X| 1| 63| Magnet Plate| | 3
30| Seat| | 1| 64| Spring| | 1
31| Washer| Ф8Ф161.5| 18| 65| Nut| M6| 3
32| Nut| M8 S13| 7| 66| Bolt| M620| 1
33| Bolt| M860| 4| 67| Belt Pully Crank| | 1
No.| Description| Spec.| Qty| | No.| Description| Spec.| Qty
---|---|---|---|---|---|---|---|---

68

| ****

Belt

| ****

240 PJ4

| 1| ****

92

| Back Seat Connect

Post

| | 1
69| Belt| 230    PJ3| 1| 93| Mesh Cushion| | 1
70| Screw| M510| 1| 94| Square End Cap| | 1
71| Big Flat Washer| Φ20Φ82.0| 1| 95| Bolt| M640| 2
72| Bearing| φ35φ1515| 1| 96| Bolt| M845| 1
73| Pulley Shaft| Φ1733| 1| 97| Round Knob| M820| 1
74| Nut| M10| 1| 98| Pan Bolt| M845| 2
75| Sensor Wire| L=250MM| 1| 99| Rear Handlebar Post| | 1
76| Screw| M4*10| 1| 100| Handlebar Cover| | 1

77

| ****

Driven Plate

| | 1| ****

101

| Rear Handlebar Foam

Grip

| ****

Φ24Φ30240

| 2
78| Bearing| 608| 2| 102| Handrail swivel| | 1
79| Driven Shaft| | 1| 103| Bolt| M815| 2
80| Pulling Bolt| M636| 2| 104| Rope Group| Φ71160| 2
81| Nut| M101.0| 2| 105| Gourd hook| | 2
82| Shaft Circlip| | 1| 106| Plastic pulley block| | 2
83| Nut| M1013| 1| 107| Bolt| M647| 2
84| Screw| ST4.225| 6| 108| Nut| M6| 2
85| Left Cover| | 1| 109| Swivel block| | 2
86| Right Cover| | 1| 110| Plastic Washer| Φ8.5Φ242.0| 2
87| Left crank| | 1| 111| Washer| Φ6Φ121.0| 10
88| Right crank| | 1| 112| Allen Wrench| S6| 1
89| Nut| M10*1.25| 2| 113| Spanner| S10,13,14,15| 1
90| Crank Cover Cap| | 2| 114| Spanner| S10,13| 1
91| Back Seat Post| | 1| 115| Allen Wrench| S5| 1

More Information

• FB: @SUNNYHEALTHANDFITNESS
• Insta: @SUNNYHEALTHFITNESS
• Twitter: @SUNNYHEALTHFIT
• Youtube: /SUNNYHEALTHFITNESS
• Pinterest: /SUNNYHEALTHANDFITNESS
• Tiktok: @SUNNYHEALTHFITNESS
• WWW.SUNNYHEALTHFITNESS.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>