TENTANDTABLE 1.5hp Inflatable Water Slide Kids Adults Instructions
- June 15, 2024
- TENTANDTABLE
Table of Contents
1.5hp Inflatable Water Slide Kids Adults
Trouble Shooting Inflatable Air Flow (failure to inflate):
The most common reasons for improper air-flow are listed below. Please rule
out Air Leakage from the seams — as this is a correct feature of inflatable
operation.
-
Are the deflation zippers closed? (some units have 3 or 4 zippers—located at the front, back, side or in the arch)
-
Air leaking from sewn seams is normal, during operation!
-
Are the flaps closed on the bottom of the slide drains?
-
Is the air fill tube twisted restricting air into the unit?
IMPORTANT:
Some units have Water Flaps under the outer wall (shown here). Flaps should be completely closed before inflation—and opened for deflation and drainage!
-
Is the air fill tube securely attached to the blower with minimal air leaking out?
-
Is the 2nd air fill tube properly tied off with no air leaking?
-
Are you using the proper blower (1.0hp vs. 1.5hp vs. 2.0hp)?
-
Make sure there is no debris in the blower intake.
