FireBoard S1G Beacon Temperature Monitor User Manual

: June 15, 2024
: FireBoard

Table of Contents

FireBoard S1G Beacon Temperature Monitor
Product Information
Product Usage Instructions
Getting Started with FireBoard Beacon
Specifications
Configuration Settings
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FireBoard S1G Beacon Temperature Monitor

Product Information

Specifications

Outer Dimensions: N/A
Battery Power: 2x AA batteries
Frequency Range: N/A
Onboard Temp Range: N/A
Onboard Temp Accuracy: N/A
Humidity Sensor Accuracy: N/A
External Probe Range: N/A

Product Usage Instructions

Setup S1G Beacon
The FireBoard Beacon can be paired with a FireBoard account to track temperatures and humidity from long distances with FireBoard S1GTM technology. To set it up:

Connect the FireBoard Antenna (sold separately) to the FireBoard’s aux port. Make sure the S1G connectivity is ready before proceeding.
Power up the Beacon by opening the battery door using the small thumb screw and installing 2x AA batteries. It is recommended to use Lithium batteries for optimal performance in cold temperatures.

Add Beacon to Account
To add the Beacon to your FireBoard account:

Setup or login to your FireBoard account via the FireBoard Mobile app.
From the Devices tab, choose “Add FireBoard”.
The app will scan and find nearby Beacons, sorted by serial number.
Select the Beacon you want to add from the list.
After adding, the Beacon will start transmitting temperature and humidity data automatically.

Configuration Settings
Beacon settings can be configured via the FireBoard Mobile App (Device, Advanced Settings). The available configuration settings are:

LED Indicator Brightness: Off, Dim (default), Normal, Bright
Readings Interval Probe Configuration: 30s, 1m, 5m (default), 10m
LED Indicator (blinks each sample read)
Button (enables realtime mode)

FAQ

Q: How long does the Beacon transmit data in real-time mode?
A: The Beacon transmits data in real-time mode for 10 minutes. After this period, you can push the small button on the back of the Beacon to re-enable real-time mode for another 10 minutes.
Q: Where can I find more information and troubleshooting tips?
A: You can visit docs.fireboard.io for our online Knowledge Base!

Getting Started with FireBoard Beacon

The FireBoard Beacon can be paired with a FireBoard account to track temperatures and humidity from long distances with FireBoard S1GTM technology.

Setup S1G
Beacon works with the FireBoard Antenna or other FireBoard S1G devices in order to transmit data at lower frequencies. Connect the Antenna (sold separately) to the FireBoard’s aux port. Make sure the S1G connectivity is ready before adding Beacon to your FireBoard account.
Power up Beacon
Use the small thumscrew to open the battery door and install the 2x AA batteries. For optimal performance in cold temperatures, Lithium batteries are recommended. The Beacon will transmit data in real time for 10 minutes, making it easy to pair. After this period, the small button on the back of the Beacon can be pushed to re-enable real-time mode for 10 minutes.
Add Beacon to Account
Setup or login to your FireBoard account via the FireBoard Mobile app, then from the Devices tab, choose “Add FireBoard.” This will scan and find nearby Beacons, sorted by serial number. After adding, the Beacon will start transmitting temperature and humidity data automatically.

Specifications

Outer Dimensions 3” L x 2.5” W x 1.12” H (76 x 63 x 28 mm)
Battery Power 2x AA (Lithium recommended)
Frequency Range 902 – 928 Mhz
Onboard Temp Range -58°F – 266°F (-50°C – 130°C)
Onboard Temp Accuracy +/- 0.4°C
Humidity Sensor Accuracy +/- 4% RH
External Probe Range -58°F – 266°F (-50°C – 130°C)

Configuration Settings

Beacon settings are configured via the FireBoard Mobile App (Device, Advanced Settings)

LED Indicator Brightness Off, Dim (default), Normal, Bright
Readings Interval 30s, 1m, 5m (default), 10m
Probe Configuration 100K (default), 10K

Visit docs.fireboard.io for our online Knowledge Base!

Contact Information

FireBoard Labs Kansas City, MO
info@fireboard.com
816-945-2232
www.fireboard.com.

FireBoard is a trademark of FireBoard Labs, LLC and is registered in the U.S. Apple, the Apple logo, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc.