DURAVIT Wall Hung Toilet Seat Instructions

: June 15, 2024
: DURAVIT

Table of Contents

DURAVIT Wall Hung Toilet Seat
Product Information
- Specifications
Product Usage Instructions
Which cleaning agent
How often
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DURAVIT Wall Hung Toilet Seat

Product Information

Specifications

Product Model: PAL_51212/19.01.13
Material: Environmentally friendly materials
Surface Type: Sealed, nonporous
Hygiene Level: Optimal
Cleaning Agent pH Range: 5-8

Product Usage Instructions

Cleaning and Care Instructions
This product has been manufactured from environmentally friendly materials. The sealed, nonporous surface provides the best possible conditions for optimal hygiene. Please observe the following cleaning and care instructions so that you can enjoy it for as long as possible:

Which Cleaning Agent to Use?
Use a neutral cleaning agent (pH 5-8), or, if necessary, a non-aromatic petroleum hydrocarbon (e.g. turpentine) in the case of stubborn soiling.

How Often to Clean?
If the cleaning is not carried out regularly enough, soiling will become more difficult to remove. Regularly clean the surface or clean immediately if soiled.

How to Clean?

Note!
Spray can penetrate very small openings and gaps and damage the surface.

Spray the spray cleaner onto the cleaning cloth and NOT directly onto the product.
Clean the surface with a soft damp cloth.
Remove heavier soiling with warm water and a cleaning agent that you apply to the cloth.
Rinse with clean warm water to remove all traces of the cleaning agent and dirt.
Dry the surface.

FAQ

Q: What cleaning agent should I use for stubborn soiling?
A: Use a non-aromatic petroleum hydrocarbon, such as turpentine, if necessary.
Q: How often should I clean the surface?
A: Clean the surface regularly or immediately if it becomes soiled.
Q: Can I spray the cleaner directly onto the product?
A: No, spray the cleaner onto the cleaning cloth and not directly onto the product to prevent damage.
Q: How should I remove heavier soiling?
A: Use warm water and a cleaning agent applied to a cloth to remove heavier soiling.
Q: How should I rinse the surface after cleaning?
A: Rinse with clean warm water to remove all traces of the cleaning agent and dirt.
Q: How should I dry the surface?
A: Simply dry the surface using a cloth or allow it to air dry.

This product has been manufactured from environmentally friendly materials. The sealed, non-porous surface provides the best possible conditions for optimal hygiene. Please observe the following cleaning and care instructions so that you can enjoy it for as long as possible:

Which cleaning agent

Use a neutral cleaning agent (pH 5-8), or, if necessary, a non-aromatic petroleum hydrocarbon (e.g. turpentine) in the case of stubborn soiling.

Note!
Damage and yellow discolouration due to incorrect cleaning agents and equipment!

Do NOT use abrasive cleaning agents or cleaning agents containing chlorine or acid, such as: scouring detergents, chlorinated hydrocarbon, esters (e.g. nitro or thinners and acids), ketones (e.g. acetone, alcohols, aromatics) glycol ether or the like.
Do not allow the cleaning agent to take effect.
Do NOT use any high-pressure cleaning equipment. Yellow discolouration due to rising vapours!
Leave the seat up while the toilet/urinal contains a powerful cleaning agent.
Do not use any toilet blocks or cistern tablets.

How often

If the cleaning is not carried out regularly enough, soiling will become more difficult to remove.

Regularly clean the surface or clean immediately if soiled.

How?

Note!
Spray can penetrate very small openings and gaps and damage the surface.

Spray the spray cleaner onto the cleaning cloth and NOT directly onto the product.
Clean the surface with a soft damp cloth.
Remove heavier soiling with warm water and a cleaning agent that you apply to the cloth.
Rinse with clean warm water to remove all traces of the cleaning agent and dirt.
Dry the surface.