KYE Systems Ergo 8300S Wireless Vertical Ergonomic Silent Mouse

Product Information

Specifications

• Model: Ergo 8300S

• Type: Wireless Vertical Ergonomic Silent Mouse

• Dimensions:

  • Vertical Width: 120mm
  • Horizontal Width: 80mm

• Multi-language Quick Guide included

• Manufacturer: KYE Systems Corp.

• Address: #492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei
  City 241017, Taiwan

• Tel: 886-2-2995-6645

• Fax: 886-2-2995-6649

• Email: support@geniusnet.com.tw (Tech. Support)

• Website: http://www.geniusnet.com

• Made in: China

Product Usage Instructions

1. Step 1: Unboxing
   Open the package and take out the Ergo 8300S Wireless Vertical Ergonomic Silent Mouse.

2. Step 2: Inserting Batteries
   The Ergo 8300S mouse is powered by two AAA batteries. Open the battery compartment on the bottom of the mouse and insert the batteries according to the polarity markings.

3. Step 3: Connecting the Receiver
   Plug the USB receiver into an available USB port on your computer. The receiver will automatically pair with the mouse.

4. Step 4: Using the Mouse
   Hold the Ergo 8300S mouse in a vertical position, with your hand resting comfortably on the ergonomic design. The mouse buttons and scroll wheel can be used as in a traditional mouse.

5. Step 5: Adjusting Mouse Sensitivity
   If you find the cursor movement too fast or too slow, you can adjust the mouse sensitivity through your computer’s operating system settings or by using the included software (if applicable).

6. Step 6: Maintaining the Mouse
   To keep your Ergo 8300S mouse in optimal condition, clean it regularly using a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials that may damage the surface.

FAQ

1. Q: How do I know if the mouse is compatible with my computer?
   A: The Ergo 8300S mouse is compatible with most computers running Windows, macOS, or Linux operating systems. It uses a standard USB receiver for connectivity.

2. Q: Can I use this mouse with my laptop?
   A: Yes, the Ergo 8300S wireless mouse can be used with laptops that have an available USB port. Simply plug in the USB receiver and start using the mouse.

3. Q: How long do the batteries last?
   A: The battery life of the Ergo 8300S mouse may vary depending on usage. On average, the batteries can last up to several months before needing replacement

4. Q: Is there any software required for this mouse?
   A: The Ergo 8300S mouse does not require any additional software. It is plug- and-play compatible with most operating systems.

KYE Systems Corp.

• 492, Sec. 5, Chongxin Rd., Sanchong Dist.,

• New Taipei City 241017, Taiwan
• Tel: 886-2-2995-6645
• Fax: 886-2-2995-6649
• Email: support@geniusnet.com.tw (Tech. Support)
• http://www.geniusnet.com
• Ergo 8300S
• NX-7XXXXX Series
• RECEIVER
  • M/N: GM-23000
  • FCC ID: FSUGMZMH PATING 5V 50mA(max)
  • www.geniusnet.com
• KYE Systems Corp. MADE IN CHINA

• For actual items, refer to the physical goods contained herein.
• Product storage conditions
  • Temperature: -20ºC~50ºC
  • Humidity : 5%~85%.

Declaration of Conformity

• The following designated
• product: M/N: Ergo 8300S
  • is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Radio Equipment Directive (2014/53/EU). Foi the evaluation regarding the electromagnetic compatibility, the following standards were applied
  • EN 300 328 / EN 301 489-1 / EN 301 489-17 / EN 62479 / EN 62360-1
• This declaration is prepared for the manufacturer: KYE SYSTEMS CORP. #492 Sec 5 Chonaxin Rd Sanchona Dist New Tainei Citv 241017 Taiwan (R O C \ Diss clan

Symbol for Separate Collection in European Countries
This symbol indicates that this product is to be collected separately. The following apply only to users in European countries

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• For more information, contact the retailer or the local authorities in charge of waste management.

Federal Communication Commission(FCC) interference statement

• This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
• These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in particular installations.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient / Relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

FCC WARNINGS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference. And
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION

• Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
• RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Disclaimer

• The following does not apply to any country where such provisions are inconsistent with local law: KYE Systems Corp. makes no warranties with respect to this documentation, whether expressed or implied. All material is provided “as is”. This includes, but is not limited to, any implied warranties of merchantability and fitness is for a particular purpose.
• The information covered in this document is subject to change without notice.
• KYE Systems Corp. assumes no responsibility for any errors that may appear in this document. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies.
• Copyright KYE Systems Corp. All rights reserved.

OVERVEIW

Hardware Installation

1. You can connect the receiver to a USB port of a PC.
2. Install two AAA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the mouse.

Button Assignment

1. Left button: Provides traditional mouse functions such as click double click or drag.
2. Right button : You can assign this button  to frequently used keyboard and mouse functions.
3. Middle button : Press this button to surf the Internet and Windows documents.
4. DPI adjustment ( +): 1000 / 1200 (default) / 1600.
5. DPI adjustment (-): 1000 / 1200 (default) / 1600.
6. Forward : Scroll up the page.
7. Backward : Scroll down the page.

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror.
2. If you feel the mouse does not move smooth as usual, it is possible the batteries have lost their charge so you need to replace them. Remember to put the batteries in the correct direction.

References

• Genius designs personal peripheral devices with a target to provide a better experience in everyone's lives. Visit Genius to find your devices with high quality, easy usage and effective cost.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>