BERNY Bands Alligator Grain Calfskin Replacement Watch Straps Installation Guide
- June 15, 2024
- BERNY
Table of Contents
BERNY Bands Alligator Grain Calfskin Replacement Watch Straps
Product Information
Specifications
- Product Name: Quick-Release Strap
- Compatibility: Fits most watches with standard lug sizes
- Material: High-quality durable material
- Color: Black
- Size: Adjustable to fit wrist sizes from X to Y inches
Product Usage Instructions
Step 1: Removing the Old Watch Straps
- Pull the quick-release levers towards the middle of the watch straps.
- Simultaneously, pull the watch straps away from the lugs on the sides of the levers.
- Repeat the previous steps for the other halves of the watch straps until both halves are completely removed.
Step 2: Attaching the Quick-Release Strap
- Take one end of the quick-release strap and insert the spring bar into one side of the watch’s lugs.
- Align the spring bar with the corresponding hole in the watch lugs.
- While keeping the quick-release levers pulled towards the middle of the watch straps, release them. The spring bars should lock into place securely.
- Repeat the previous steps for the other halves of the watch straps until both halves are fastened securely to the watch.
Step 3: Checking Installation
Gently pull both halves of the watch straps away from the watch to ensure a
secure installation. The straps should not come loose or detach easily.
Note: If the installation feels loose or if the watch straps do not lock
properly, repeat the installation steps carefully.
FAQ (Frequently Asked Questions)
-
Q: Can I use the Quick-Release Strap with any watch?
A: The Quick-Release Strap is designed to fit most watches with standard lug sizes. However, it is recommended to check the lug size of your watch before purchasing to ensure compatibility. -
Q: How do I adjust the size of the Quick-Release Strap?
A: The Quick-Release Strap is adjustable to fit wrist sizes from X to Y inches. To adjust the size, simply follow the instructions provided in the user manual or refer to the manufacturer’s website for specific guidelines. -
Q: Can I wash the Quick-Release Strap?
A: Yes, the Quick-Release Strap can be washed. It is recommended to use mild soap and water for cleaning. Avoid using harsh chemicals or abrasive cleaners as they may damage the strap material.
How To Install A Quick-Release Strap
- Step 1 – Removing the Old Straps
- To remove watch straps that have quick-release spring bars, locate the quick-release levers on the back side of the watch straps, as indicated in the photo below:
- Pull the quick-release levers towards the middle of the watch straps and pull the watch straps away from the lugs on the sides of the levers.
- Slide the other ends of the spring bars out of the other lugs and remove the watch straps completely.
- Repeat the previous steps for the other halves of the watch straps so that both halves of the watch straps have been removed completely
- Step 2 – Installing the New Straps
- Before installing the new quick-release straps, note that the buckle ends of the watch straps will be installed in the watch’s top lugs, and the long ends of the watch straps will be installed in the bottom lugs.
- Slide the ends of the spring bars that are opposite the quick-release levers into one side of the watch’s lugs.
- Pull the quick-release levers towards the middle of the watch straps while aligning the spring bars with the holes in the watch lugs. Release the quick-release levers, and the spring bars should lock into the watch’s lugs.
- Repeat the previous steps for the other halves of the watch straps, so that both halves of the watch straps have been fastened securely to the watch.
- The installation is now complete. Gently pull both halves of the watch straps away from the watch to ensure a secure installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>