Maytag P6SD-X Air Conditioner Packaged Owner’s Manual

Maytag P6SD-X Air Conditioner Packaged

IMPORTANT INFORMATION

The P6 Series single packaged air conditioners are high efficiency self contained cooling units that can be installed on a roof or on a slab. The convertible unit design makes installations simple in all applications. Units are ETL and ETLC listed.

FEATURES and BENEFITS

• State-of-the-art Copeland Scroll compressor is standard equipment.
• Proven, Industry Standard Components Easier service and availability.
• TXV Externally Equalized Provides precise refrigerant control under varying load conditions.
• High and Low Pressure Switches Added compressor protection.
• Liquid Line Filter Drier Insures clean and dry refrigeration system.
• Externally Accessible Service Ports Quick access to refrigerant system without disrupting operation.
• Compact Footprint/Low Profile Easy to handle and transport.
• Convertible Air Delivery Horizontal or downflow to accommodate rooftop or horizontal application.
• Heavy-Gauge, Full Perimeter Base Rails Facilitates forklift handling and curb mounting.
• Galvanized Steel Cabinet Polyurethane finish provides 950 hours salt spray protection.
• Wire Guard Coated with Earth Friendly Epoxy and Mesh Hail Guard Will never rust and protects the coil from being damaged by balls, lawnmowers, hail etc.
• Corrosion-Resistant Drain Pan Quickly drains away evaporator condensate.
• Quiet Operation and Low Vibration 20″ fan blade combined with custom venture condenser fan.
• Access to Controls and Major Components Easy in and out service.
• Service Access Panels Allows easy access to all major components and the compressor. Designed to make servicing easier for the Contractor.
• Easy to Install Electric heat strip provides up to 20 KW of heat output.
• Accessories Roof curbs, economizers, fresh air dampers and more.

MODEL IDENTIFICATION CODE

DIMENSIONS

Top View

Top View

Model Number P6SD| Unit Weight| Center of Gravity| Height (in inches) C
---|---|---|---
A| B| with base rails

X36| 405| 29.5| 26.0| 35.0
X48| 415| 29.5| 26.5| 35.0
X60| 480| 30.0| 27.5| 43.0

Back (Duct) View

SPECIFICATIONS

Performance
Capacity -Cooling BTUH| 34,200| 46,000| 58,000
Efficiency – SEER| 13.3| 13.0| 13.3
EER (Btuh/watt)| 11.2| 11.5| 11.0
Electrical Rating – 60 Hz
Phase| 1| 1| 1
Operating Voltage Range| 187 – 253| 187 – 253| 187 – 253
Compressor Data
Volts| 208 / 230| 208 / 230| 208 / 230
Rated Load Amps| 18.6| 24.3| 29.3
Lock Rotor Amps| 79| 117| 134
Indoor Blower
Type / No. of Speeds| DD / 3| DD / 3| Fixed Torque / 5
Motor – HP / RPM| 1/4 – 1075| 1/2 – 1080| 3/4
Motor – Amps| 1.3| 3.1| 6.0
Outdoor Fan
Motor – HP / RPM| 1/4 – 1100| 1/4 – 1100| 1/4 – 1100
Motor – Amps| 1.2| 1.2| 1.2
Fan Diameter / CFM| 20/3600| 20/3800| 20/3800
Refrigerant Charge – Oz.| 110| 168| 192
Shipping Weight| 415| 425| 490

BLOWER PERFORMANCE

1160
Tap T2| 1580| 1520| 1460| 1400| 1300| 1280| 1260| 1230
Tap T3| 1740| 1690| 1650| 1600| 1360| 1500| 1460| 1390
Tap T4| 1960| 1910| 1840| 1820| 1540| 1740| 1700| 1600
Tap T5| 2090| 2050| 2010| 1975| 1780| 1900| 1850| 1790

• Denotes factory set cooling speed
• Denotes factory set electric heating speed

NOTE: Airflow performance is with a dry coil

MODEL IDENTIFICATION CODE

Heater application matrix

TONNAGE & PHASE| UNIT| Nominal **KW| HEATER KIT MODEL| HEATER KIT PART NUMBER| BREAKERS REQUIRED**
---|---|---|---|---|---
3 Ton, Single Phase| P6SD| 5| H3HK005H-01B| 917166B| None
8| H3HK008H-01B| 917167B| None
10| H3HK010H-01B| 917168B| None
15| H3HK015H-01B| 917169B| 2
15| H3HK015H-21B| 917172B| None
4 Ton, Single Phase| P6SD| 5| H3HK005H-01B| 917166B| None
8| H3HK008H-01B| 917167B| None
10| H3HK010H-01B| 917168B| None
15| H3HK015H-01B| 917169B| 2
15| H3HK015H-21B| 917172B| None
20| H3HK020H-01B| 917170B| 2
20| H3HK020H-21B| 917173B| None
5 Ton, Single Phase| P6SD| 5| H3HK005H-01B| 917166B| None
8| H3HK008H-01B| 917167B| None
10| H3HK010H-01B| 917168B| 2
15| H3HK015H-01B| 917169B| 2
15| H3HK015H-21B| 917172B| None
20| H3HK020H-01B| 917170B| 3
20| H3HK020H-21B| 917173B| 1

ELECTRICAL DATA

P6SD SERIES – 208/230V – SINGLE PHASE MODELS

MODEL NUMBER P6SD-| HEATER INSTALLED NOMINAL KW| SINGLE CIRCUIT| MULTIPLE SUPPLY CIRCUIT OPTION
mica| mop| CIRCUIT A (C ompressor & F an )| CIRCUIT B (B lower & H eater )
mica| mop| mica| mop
X36K| 0| 25.8| 40| –| –| –| –
5| 26.5| 40| –| –| –| –
8| 41.2| 45| –| –| –| –
10| 51.6| 60| –| –| –| –
15| 76.6| 80| 50.0| 60| 26.6| 30
X48K| 0| 32.9| 50| –| –| –| –
5| 32.9| 50| –| –| –| –
8| 41.2| 50| –| –| –| –
10| 51.6| 60| –| –| –| –
15| 76.6| 80| 51.6| 50| 26.6| 30
20| 101.6| 110| 50| 50| 51.6| 60
MODEL NUMBER P6SD-| HEATER INSTALLED Nominal KW| SINGLE CIRCUIT| MULTIPLE SUPPLY CIRCUIT OPTION
mica| mop| CIRCUIT A (C ompressor , B lower , & F an )| CIRCUIT B (H eater o nly )| CIRCUIT C (H eater o nly )
mica| mop| mica| mOP| mCA| mOP
X60K| 0| 43.8| 70| –| –| –| –| –| –
5| 43.8| 70| –| –| –| –| –| –
8| 43.8| 70| –| –| –| –| –| –
10| 51.5| 70| 43.8| 70| 50| 60| –| –
15| 76.5| 80| 51.5| 70| 25| 30| –| –
20| 101.5| 110| 43.8| 70| 50| 60| 50| 60

NOTE: P6SD 3 & 4 ton models have PSC motors. Since the power wires run through the heater plug, keep the blower and heater on different circuits when adding a heater kit.

COPPER WIRE SIZE — AWG (1% Voltage Drop)

Supply Wire Length-Feet| Supply Circuit Ampacity
200| 150| 100| 50
6| 8| 10| 14| 15
4| 6| 8| 12| 20
4| 6| 8| 10| 25
4| 4| 6| 10| 30
3| 4| 6| 8| 35
3| 4| 6| 8| 40
2| 3| 4| 6| 45
2| 3| 4| 6| 50

Wire Size based on N.E.C. for 60° type copper conductors.

ACCESSORIES

COOLING EXPANDED RATINGS

P6SD-X36

3.64
80| 67| 35.6| 21.3| 2.70| 33.9| 20.7| 2.98| 32.1| 20.2| 3.30| 30.1| 19.5| 3.67
80| 72| 38.9| 16.3| 2.75| 37.1| 15.8| 3.03| 35.2| 15.2| 3.34| 33.1| 14.7| 3.71
75| 63| 33.1| 21.0| 2.68| 31.5| 21.1| 2.95| 29.8| 21.0| 3.28| 28.0| 20.6| 3.64
1000| 80| 62| 33.5| 28.0| 2.68| 31.9| 29.0| 2.96| 30.3| 29.0| 3.28| 28.7| 28.7| 3.65
80| 67| 36.2| 22.5| 2.71| 34.4| 22.0| 2.99| 32.6| 21.4| 3.31| 30.7| 20.9| 3.67
80| 72| 39.6| 17.1| 2.76| 37.8| 16.6| 3.04| 35.8| 16.0| 3.35| 33.7| 15.5| 3.72
75| 63| 33.7| 23.1| 2.68| 32.0| 22.9| 2.96| 30.4| 22.8| 3.28| 28.6| 22.2| 3.65
1100| 80| 62| 34.7| 31.2| 2.69| 33.1| 31.3| 2.97| 31.6| 31.6| 3.30| 29.9| 29.9| 3.66
80| 67| 37.3| 24.5| 2.73| 35.5| 23.9| 3.00| 33.6| 23.2| 3.32| 31.6| 22.6| 3.69
80| 72| 40.7| 18.2| 2.77| 38.8| 17.7| 3.05| 36.7| 17.2| 3.37| 34.5| 16.6| 3.73
75| 63| 34.8| 26.0| 2.70| 33.1| 25.6| 2.97| 31.3| 24.9| 3.29| 29.4| 24.2| 3.66

P6SD-X48

1250

| 80| 62| 44.1| 35.7| 3.45| 42.2| 36.0| 3.84| 40.0| 37.1| 4.27| 37.8| 36.6| 4.77
80| 67| 47.9| 28.8| 3.50| 45.5| 28.0| 3.87| 43.1| 27.2| 4.31| 40.6| 26.7| 4.80
80| 72| 52.1| 21.9| 3.54| 49.5| 21.2| 3.92| 46.9| 20.5| 4.35| 44.2| 19.8| 4.85
75| 63| 52.1| 16.3| 3.54| 49.5| 16.7| 3.92| 47.0| 16.7| 4.35| 44.2| 16.4| 4.85

1400

| 80| 62| 45.2| 38.2| 3.46| 43.1| 39.5| 3.85| 41.0| 39.5| 4.29| 39.0| 39.0| 4.78
80| 67| 48.7| 30.6| 3.51| 46.3| 29.8| 3.88| 43.9| 29.4| 4.32| 41.4| 28.6| 4.81
80| 72| 52.9| 23.1| 3.54| 50.4| 22.4| 3.93| 47.7| 21.6| 4.36| 44.9| 20.9| 4.86
75| 63| 53.1| 18.2| 3.55| 50.5| 18.2| 3.93| 47.7| 17.9| 4.36| 45.0| 17.4| 4.86

1550

| 80| 62| 46.2| 41.8| 3.47| 44.2| 41.9| 3.86| 42.2| 42.2| 4.30| 40.1| 40.1| 4.80
80| 67| 49.6| 32.7| 3.51| 47.1| 32.0| 3.89| 44.6| 31.2| 4.33| 42.0| 30.4| 4.82
80| 72| 53.8| 24.2| 3.55| 51.1| 23.5| 3.95| 48.4| 22.8| 4.37| 45.5| 22.0| 4.86
75| 63| 53.8| 20.3| 3.55| 51.1| 19.8| 3.95| 48.4| 19.2| 4.37| 45.5| 18.4| 4.87

P6SD-X60

1600

| 80| 62| 56.7| 45.9| 4.53| 54.1| 46.1| 5.02| 51.3| 47.5| 5.57| 48.4| 46.7| 6.19
80| 67| 61.2| 37.4| 4.62| 58.1| 36.4| 5.09| 55.0| 35.3| 5.65| 51.7| 34.2| 6.26
80| 72| 66.6| 28.6| 4.72| 63.1| 27.7| 5.20| 59.5| 26.8| 5.75| 55.7| 25.7| 6.36
75| 63| 57.0| 36.9| 4.54| 54.2| 37.0| 5.02| 51.2| 36.7| 5.57| 48.2| 36.0| 6.18

1750

| 80| 62| 57.8| 48.3| 4.59| 55.1| 49.9| 5.07| 52.2| 49.9| 5.62| 49.3| 49.2| 6.24
80| 67| 62.0| 39.2| 4.67| 58.9| 38.1| 5.14| 55.7| 37.0| 5.70| 52.3| 35.8| 6.31
80| 72| 67.1| 29.8| 4.77| 63.5| 28.8| 5.24| 59.9| 27.8| 5.79| 56.2| 26.8| 6.41
75| 63| 57.8| 40.1| 4.59| 54.9| 39.8| 5.07| 51.9| 39.1| 5.62| 48.8| 38.1| 6.23

1900

| 80| 62| 58.7| 52.1| 4.64| 56.0| 52.2| 5.13| 53.1| 53.0| 5.68| 50.4| 50.4| 6.30
80| 67| 62.7| 40.9| 4.72| 59.6| 39.8| 5.20| 56.3| 38.7| 5.75| 52.8| 37.5| 6.36
80| 72| 67.5| 30.9| 4.81| 64.0| 29.9| 5.29| 60.5| 28.8| 5.84| 56.7| 27.7| 6.46
75| 63| 58.5| 43.5| 4.64| 55.6| 42.7| 5.12| 52.5| 41.6| 5.66| 49.3| 40.3| 6.28

GENERAL TERMS OF LIMITED WARRANTY

Nortek Global HVAC, LLC will furnish a replacement for any part of this product which fails in normal use and service within the terms and conditions of the warranty.

For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the Nortek Global HVAC, LLC warranty department for a copy.

Before purchasing this appliance, read important energy cost and efficiency information available from your retailer. Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A (10/2015)

CUSTOMERS SUPPORT

800C-1014 (Replaces 800C-0910)

®/TM/© Maytag. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, Missouri,
USA. Limited warranty provided by the manufacturer. © Nortek Global HVAC, LLC. All rights reserved.

www.maytaghvac.com

References

• TCPDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>