ICONIC NORDIC ROOMS Edge 13 Shower Corner Instruction Manual

June 4, 2024
ICONIC NORDIC ROOMS

ICONIC NORDIC ROOMS Edge 13 Shower Corner

ICONIC-NORDIC-ROOMS-Edge-13-Shower-Corner-PRODUCT-
IMAGE

COMPONENTS

ICONIC-NORDIC-ROOMS-Edge-13-Shower-Corner-01 ICONIC-NORDIC-ROOMS-Edge-13-Shower-Corner-02ICONIC-NORDIC-ROOMS-Edge-13-Shower-Corner-03

SAFETY REGULATIONS

  • This product complies with standard EN 14428.
  • All glass is tempered safety glass according to EN12150
  • Goggles are recommended to protect your eyes.
  • Always use non-slip safety glove
  • Use safety shoes during installation.
  • We recommend that two persons are present at the installation.

Note! Always set the glass down on a soft foundation, since edges and corners are very delicate

INSTALLATION

ICONIC-NORDIC-ROOMS-Edge-13-Shower-Corner-04Screw fastenings should be made in concrete or other solid structure (a), wooden studs, wooden noggins (b) or in structures that have been tested and approved for fastenings, for example a sheet construction (c). Requirements for sealing apply in wet zones 1 and 2. See examples of construction at säkervatten.se.

ICONIC-NORDIC-ROOMS-Edge-13-Shower-Corner-11Did you know that it’s possible to glue the shower to the wall using our product SAFE-FIX Shower? Read more and watch the instruction clip at www.inr.se

Holes on inside of shower ICONIC-NORDIC-ROOMS-Edge-13-Shower-
Corner-55 ICONIC-NORDIC-ROOMS-Edge-13-Shower-
Corner-06

ICONIC-NORDIC-ROOMS-Edge-13-Shower-Corner-10

WARRANTY

On all shower enclosures in the EDGE, ARC, EPIC and LINC series, we leave a 15-year warranty against any manufacturing defects. On BRIC and BASIC models, we leave a 5 year warranty. Sealing strips and magnetic strips are not covered by the warranty but are considered consumables. We recommend that the strips are replaced annually to remain fresh.

CARE ADVICE

Clean daily with water and a squeegee. To combat ingrained dirt, you are recommended to use a detergent intended for the purpose. Remember that sponges and abrasive paste cleaners can scratch both the glass as well as metal.

RECYCLING
  1. Wear protective goggles and gloves.
  2. Separate the sealing strip from the glass.
  3. Place some form of protection under the glass.
  4. Separate the profiles from the glass.
  5. Strike one corner with a hammer to break the glass.
  • Take glass to the glass recycling facility
  • Take aluminum and screws to the metal recycling facility.
  • Take plastic strips and components to the plastic recycling facility.

INR Sverige
Kosterögatan 15211 24 MalmöSverige
Tel 0200-38 40 40
info@inr.se
www.inr.se

INR Norge
Fjordgaten 13 A3125 TønsbergNorge
Tel +47 33 33 02 00
info@inr.no
www.inr.noINR

INR Danmark
Kosterögatan 15211 24 MalmöSverige
Tel +45 33 60 31 10
info@inr.dk
www.inr.dk

INR Suomi
Itsehallintokuja 402 600 EspooSuomi
Tel 010 209 3300
info@inr.fi
www.inr.fi

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals