DongCheng FFCL2020 18V 20V MAX Lithium Ion Battery Charger User Manual
- June 15, 2024
- DONGCHENG
Table of Contents
FFCL20-02
Battery charger
OPERATION INSTRUCTIONS
Read through carefully and understand these instructions before use.
IMPORTANT SAFETY
INSTRUCTIONS – SAVE THESE INSTRUCTIONS
DANGER–TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS
-
WARNING:
RISK OF ELECTRIC SHOCK, DRY LOCATION USE ONLY, FOR INDOOR USE ONLY.
Risk of Injury. Charge only 18V Li-Ion type rechargeable batteries,other types may explode. -
It is recommended to place the battery in a well ventilated area during charging.
Work Area Safety
- Do not operate battery charger in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
Electrical Safety
- The plug of battery charger must match the outlet. Never modify the plug in anyway. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Do not expose battery charger to rain, snow or wet conditions.
- Protect battery charger against heat, oil, sharp edges and moving parts.
Battery Charger Use and Care
-
Store battery charger out of reach of children and do not allow persons unfamiliar with the battery charger or these instructions to operate the charger.
-
To be safe, disabled, retarded, untrained people or people disable to operate independently, including young children, are discouraged to operate the battery charger without supervision. Young children should be supervised to ensure that they do not play with the charger.
-
Make sure that the AC voltage of the power source meets the requirement specified on the nameplate of the battery charger. Be sure to charge in a well ventilated area without inflammables.
-
When finishing charging, please power down before taking away the battery from the charger. Do not leave the battery in the charger for long time.
-
Always unplug the charger before performing any kind of work on it (e.g. maintenance, cleaning, etc.). Only use soft and dry cloth to wipe the body of battery charger. Do not clean the charger with wet cloth, thinner, gasoline or other volatile solvents.
-
Do not disassemble the battery charger. Be careful not to drop, shake or strike the battery charger. Store battery charger in a moisture-proof and antifrost area.
-
Never use the battery charger for other purposes or for other manufacturer’s batteries.
-
Make sure no foreign bodies in the cradle of the battery charger before inserting the battery and avoid dirty or moisture.
-
Do not dispose of damaged or worn out battery charger into household waste.
-
Do not charge for damaged battery.
-
Never charge for nonrechargeable batteries, otherwise may result in a risk of overheating, possible burns and even an explosion.
-
Do not operate the battery charger when the environmental temperature is under 5°C or higher than 40°C; Otherwise may cause damage to the battery or disable for charging.
It may unable to charge when the environmental temperature is under 0°C. -
Do not use battery charger with damaged electric plug or cord. To avoid any risk of injury, take the damaged charger to a qualified serviceman or an authorized center to replace the cord and plug. Only use original cord and plug.
-
To avoid the risk of electric shock, do not touch the metal of output connecting parts.
SAVE THESE INSTRUCTIONS.
WARNING!
MISUSE or failure to follow the safety rules stated in this instruction manual
may cause serious personal injury.
Conformity of US and CANADA
SPRCIFICATIONS
The battery charger can be used to recharge for rechargeable Li-ion BATTERY PACK under normal clrcunstance.The working temperature of the battery charger is between 5℃ and 40℃ with the humidity ≦ 90% RH.
Model | FFCL20-02 |
---|---|
Input Voltage and Frequency | AC 120V/60Hz |
Input Power | 50W |
Output Voltage | 20V **** |
Charging Current | 2.0A |
Applicable Battery Pack Voltage | 18V **** |
Number Of Battery Packs That Can Be Recharged At One Time (Max) | 1 |
Applicable Battery Cartridge Capacity | 2.0 Ah |
8.0Ah
Full Charging Time| ≈ 60 min| ≈ 75 min| ≈ 120 min| ≈ 150 min| ≈ 180 min| ≈ 240
min
NOTE: Actual Charging Voltage according to the nameplate indicates.
Due to the continuing program of research and development, the specifications
herein are subject to change without prior notice.
INSTRUCTIONS FOR OPERATION
Battery Charing
CAUTION:
- Make sure that the AC voltage of the power source meets the requirement specified on the nameplate of the charger.
- Plug the battery charger into the proper AC power source. The charging indicator light will flicker in green color and the charger operates in standby mode.
- Insert the battery pack fully into the battery charger to start charging.
The battery pack will only be partially charged at the time of delivery.
Please recharge the battery pack indoors before formal operation.
In the environment with high temperature or after using for a long time. The
machine may get hot. Please do not charge it immediately at this time, but
charge it after the battery pack is cooled. Otherwise, the service life of the
battery pack will be shortened or the battery pack will not be charged due to
overheating.
- Negative Terminal
- Positive Terminal
- Indicator Light
- Battery Pack
- Charger
Charging Indicator Light
The battery charger can detect some sort of failure caused by the battery and
indicates by the statuses of the red and green indicator lights.
When a failure occurs,remove the battery and then insert it into the charger
again if the failure continues, change with a new battery. If the new battery
can be charged, then the old battery maybe damaged. If the charging indicator
lights indicate same failure as before while changing with a new battery, the
the charger maybe damaged, take the charger to be repaired by qualified
serviceman.
The following chart lists the relations between the statuses of charging and
charging indicator lights.
Descriptions of Charging Status| Icons| Icons of Charging
Indicator Lights| Descriptions of Charging Indicator Lights
---|---|---|---
Green Light| Red Light
Plug the charger into a proper outlet| | | | Green light flickers, red light
extinguished
During charging| | | | Green light extinguished, red light keeps flickering
steadily
Charge complete| | | | Green light keeps up steadily, red light extinguished
Abnormity occurs on the battery| | | | Green and red light flicker alternately
The temperature of the battery is under 0°C or higher than 45°C| | | | Green
light extinguished, red light flickers
Made by Jiangsu Dongcheng M&E Tools Co.,Ltd.
Add:Power Tools Industrial Park of Tianfen, Qidong City, Jiangsu
Province, P.R. China
Tel :+86-400-182-5988
Fax:+86-513-83299608
https://www.dongchengtool.com/
90040600436/2022.04/NO.1