NDI KC-316A 6 In 1 Non Invasive Moisture Meter User Manual

NDI KC-316A 6 In 1 Non Invasive Moisture Meter User Manual

INTRODUCTION

The KC-316A moisture measuring instrument is designed with a non-invasive principle, utilizing the sensing part of the instrument head. It allows for accurate moisture measurement of various materials without damaging the object being tested. Through the instrument’s LCD screen, users can easily obtain the moisture content, ambient temperature, humidity, and mildew index of the tested object under the current environment. The product is compact, easy to operate, provides rapid measurement, and is highly portable. It is an essential tool for on-the-go use.

PRODUCT OVERVIEW

The KC-316A is a 6-in-1 non-invasive moisture meter. It is designed to measure the moisture content of various materials such as drywall, cement board, softwood, and hardwood. The meter features an inductive measuring component, an LCD screen for displaying measurement values, a function button for mode selection, a battery compartment, and a battery compartment cover.

• Inductive measuring components
• LCD
• Function Button
• Battery compartment
• Battery compartment cover

Product Information

Specifications

• Measuring Range:
  • Drywall: 0 ~ 50% Relative value
  • Cement board: Not specified
  • Softwood: Not specified
  • Hardwood: Not specified
• Temperature Measurement: Yes
• Humidity Measurement: No
• No Operation Backlight Darkening Time: Not specified
• Automatic Shutdown: Not specified
• Power Supply: 2 AAA batteries
• Maximum Power Consumption: Not specified
• Operating Ambient Temperature: Not specified
• Working Environment Humidity: Not specified
• Storage Environment: Not specified
• Dimensions: Not specified
• Weight: Not specified
• Thank you for purchasing our products.
• This instrument is not a universal instrument that can detect any material in the wall, I hope users can understand it.
• Please read this manual carefully before operating it correctly.
• Please keep it properly after use.

LCD Screen Overview

• Buzzer function identifier
• Battery indicator
• Moisture level display
• Mildew index display
• Moisture value display
• Locking sign
• Measurement mode display
• Ambient temperature value
• Temperature unit
• Ambient humidity

Operating Instructions

Install Batteries
To install the batteries, follow these steps:

1. Open the battery compartment at the bottom of the tool.
2. Insert 2 AAA batteries into the compartment according to the positive and negative electrode marks.

To open the battery compartment at the bottom of the tool.Then insert 2pcs AAA batteries into the compartment according to the positive and negative electrode marks.

Selecting the Mode
To select the measurement mode, follow these steps:

1. Long press the POWER button to turn on the tool with a beep. The default startup mode is DRYWALL.
2. Press the MODE button to switch between the DRYWALL, CEMENT BOARD, SOFTWOOD, and HARDWOOD modes.
3. Press and hold the power button for about 1 second to shut down the tool.

Measurement
To measure the moisture content of an object, follow these steps:

1. Place the sensing parts of the machine in close contact with the flat surface of the object being measured(like below schematic diagram). Wait until the moisture value stabilizes before reading the measurement result. If the moisture content exceeds the measurement range, “HH%” will be displayed on the screen.
2. Briefly press the “HOLD” key during measurement to lock the moisture measurement data.
3. The lower section of the screen displays the current environmental temperature and humidity in real-time. The device also calculates the mildew index (nine levels in total) based on the current environmental conditions and displays it in the “D” area of the screen.
4. Briefly press the “SET” key to turn the buzzer on or off. This function has a power-off memory feature. When the buzzer is on, an alarm will sound when the moisture value exceeds the red range.
5. Press and hold the “SET” button to switch the temperature display unit. This function also has a power-off memory feature.
6. After 15 seconds of inactivity, the backlight will dim, and the device will enter power-saving mode. It will exit power-saving mode when there is key operation or when the moisture value changes by more than 1%.

STATUS INDICATION

Moisture indicator:

1. Gypsum board mode:
   • Green indicator block – 1%~16%:DRY
   • Yellow indicator block – 16.1%~28%:SLIGHTLY DAMP
   • Red indicator block – 28.1%~50%:EXCESSIVE DAMPNESS
2. Cement board mode:
   • Green indicator block – 1%~16%:DRY
   • Yellow indicator block – 16.1%~28%:SLIGHTLY DAMP
   • Red indicator block – 28.1%~50%:EXCESSIVE DAMPNESS
3. Cork mode:
   • Green indicator block – 1%~16%:DRY
   • Yellow indicator block – 16.1%~28%:SLIGHTLY DAMP
   • Red indicator block – 28.1%~50%:EXCESSIVE DAMPNESS
4. Hardwood mode:
   • Green indicator block – 1%~16%:DRY
   • Yellow indicator block – 16.1%~28%:SLIGHTLY DAMP
   • Red indicator block – 28.1%~50%:EXCESSIVE DAMPNESS
5. Mildew index indicator bar:
   The mildew index is 9 levels in total, and the higher the index is, the easier the mildew will occur;

OPERATION TIPS

1. In case the instrument fails to start normally or displays a low battery symbol on the LCD screen after turning on, it indicates that the battery needs replacement. Please replace the battery before use.
2. The moisture value of the measured wood is influenced by ambient humidity and wood density. To ensure accurate measurements, it is crucial to select the correct measurement mode. The moisture trend of the material should be assessed by analyzing data obtained from multiple measurements.

SAFETY INSTRUCTION

The following safety tips must be observed when using this product to avoid physical injury.

• Please read all contents of this manual carefully before correct operation.
• Do not remove any label on the instrument.
• Do not operate the instrument with flammable and explosive gases.
• Children are not allowed to use this instrument.

BATTERY SAFETY TIPS

• Before cleaning this product, remove the battery.
• If the product will not be in use for an extended period, please remove the battery.
• Ensure proper battery installation by aligning the positive and negative poles accordingly.
• Please dispose of used batteries by regulations: avoid exposing batteries to high temperatures or disposing of them in fire. Insulate the battery terminals with tape to prevent contact with other objects. Many countries have specific guidelines regarding battery disposal, kindly comply with relevant regulations.

CAUTIONS

• Do not tear off any labels on the instrument
• Do not drop and use rough
• Do not disassemble or install the machine (to avoid causing malfunction)
• Do not place with corrosive gases or other corrosive substances
• Do not use in rain and water droplets
• Do not expose this product to vibrations or high and low temperatures
• Please keep the machine dry and clean.
• Do not immerse the machine in water to avoid damage to the product
• Please remove the battery when the product is not used for a long time

CALIBRATION INSTRUCTION

This instrument features a self-calibration function. If the hand-held instrument is used in the air (with no other object within a 50 cm radius of the machine), the displayed moisture data may not be 0. To perform a self- calibration, press and hold the “HOLD” button for 3 seconds until the “CAL” symbol appears on the display screen. The instrument will enter automatic calibration mode, remain stable, and wait for the moisture data to be displayed again. Once the calibration is complete, the instrument will display the new, accurate moisture measurement.

WARRANTY

This product is covered by a one-year warranty from the date of purchase, guaranteeing that it is free from defects in materials and workmanship.

Please note that the warranty does not apply under the following conditions:

• Any disassembly of internal machine will void the warranty.
• Any damage resulting from abrasion, water, dropping, or disassembling is not covered by the warranty.

Tip: As many components of this product are recyclable, please dispose of it according to local laws instead of throwing it in the trash.

FAQ

Q: What should I do if the instrument fails to start or displays a low battery symbol?
A: If the instrument fails to start normally or displays a low battery symbol on the LCD screen after turning on, it indicates that the battery needs replacement. Please replace the battery before use.

Q: How does ambient humidity and wood density affect the moisture value of measured wood?
A: The moisture value of the measured wood is influenced by ambient humidity and wood density. To ensure accurate measurements,it is crucial to select the correct measurement mode. The moisture trend of the material should be assessed by analyzing data obtained from multiple measurements.

Q: Are there any safety instructions for using this product?
A: Yes, please observe the following safety tips when using this product to avoid physical injury:

• Read all contents of the manual carefully before correct operation.
• Do not remove any label on the instrument.
• Do not operate the instrument with flammable and explosive gases.
• Children are not allowed to use this instrument.

Q: Are there any battery safety tips?
A: No specific battery safety tips are provided in the user manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>