Elecraft KH1 Handheld Portable CW QRP Transceiver Instruction Manual
- June 15, 2024
- ELECRAFT
Table of Contents
Elecraft KH1 Handheld Portable CW QRP Transceiver
Product Information
- Specifications
- Model: Elecraft KH1
- Owner’s Manual Version: Rev. B2-2
- Date: November 29, 2023
- Features
- The Elecraft KH1 offers the following features:
- High-quality battery charger board
- Internal battery plug with plastic pull-tab
- Manual Corrections and Omissions
- No corrections or omissions have been reported for this manual version.
- Important Note Regarding Battery Plug Extraction
- When extracting the internal battery plug using the plastic pull-tab, it is essential to follow these steps:
- Hold the plastic pull-tab firmly with one hand.
- With the other hand, press lightly on the mating PCB jack to stabilize it.
- Gently pull the plastic pull-tab to extract the battery plug.
- This technique prevents the battery charger board from rocking and coming unplugged due to excessive extraction force.
- Frequently Asked Questions (FAQ)
- Q: Are there any features described in the manual that are not yet implemented?
- A: No, all features described in the manual are currently implemented in the Elecraft KH1.
IMPORTANT NOTE REGARDING
IMPORTANT NOTE REGARDING BATTERY PLUG EXTRACTION
- When extracting the internal battery plug using the plastic pull-tab, use a finger or thumb on the other hand to press lightly on the mating pcb jack.
- This will keep the battery charger board from rocking and coming unplugged due to excess extraction force.
FEATURES DESCRIBED
FEATURES DESCRIBED IN THE MANUAL BUT NOT YET IMPLEMENTED
- CW/SSB cross-mode operation
- Internal logging to 32K EEPROM
- VBAT Ah reading/zeroing (in MENU:VBAT)
- Adding seconds to RTC time-setting menu entry (MENU:ADJ TIME)
- ADJ DATE menu entry
- Switch tones (including Morse-audio feedback)
MANUAL CORRECTIONS AND OMISSIONS
- (None)
- Rev. B2-2
- Nov. 29, 2023
Read User Manual Online (PDF format)
Loading......