Madison PD1921 Series 12 Wide Pendant with Metal Shade User Manual
- June 15, 2024
- madison
Table of Contents
**Madison PD1921 Series 12 Wide Pendant with Metal Shade User Manual
**
IMPORTANT SAFETY INSTRUCTIONS:
- CAUTION – TURN OFF THE MAIN POWER AT THE CIRCUIT BREAKER BEFORE INSTALLING THE FIXTURE, IN ORDER TO PREVENT POSSIBLE SHOCK.
- CAUTION – If you feel you do not have enough electrical wiring experience contact a qualified licensed electrician for installation of your lighting fixture.
- These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
- Do not use the electric cord only (without steel/reinforced cable) to support the weight of the lighting fixture.
- This lighting fixture is intended for indoor use only, and in dry locations.
- This lighting fixture is intended for ceiling mount only, and connected only to 3-wire, single-phase electrical supply system with proper Ground wire or system.
- For use with E26 (medium) base light bulbs only.
- To avoid the risk of fire, do not exceed the maximum wattage of 60W incandescent bulb , or 9W LED bulb , or 13W fluorescent (CFL) bulb , or 9W self-ballasted LED bulb . (Bulbs not included)
WARNINGS
- To reduce the risk of fire, electrical shock, or personal injury: always turn off this lighting fixture and allow it to cool before attempting to replace the light bulb.
- Do not touch light bulb while fixture is turned on.
- Keep flammable materials away from this lighting fixture.
- Never look directly at a lit bulb.
CARE INSTRUCTIONS
- Turn light off and allow bulb to cool before cleaning.
- Carefully wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
- Feed wires through the mounting plate (A).
- Securely connect wires as shown using wire connectors.
- Secure mounting plate to the ceiling using screws.
Required Supply Circuit: 120V, 60Hz
-
Determine the desired length of the lamp cord, and secure length using small screw and screwdriver.
-
Carefully install the lamp shade as shown.
-
Carefully install the specified light bulb according to maximum wattage recommendations. (light bulb not included)
For use with light bulbs with a E26 (medium) base.
DO NOT EXCEED THE SPECIFIED WATTAGE.
Documents / Resources
|
Madison PD1921 Series 12 Wide Pendant with Metal
Shade
[pdf] User Manual
PD0080, PD0220, PD0337, PD0352, PD0427, PD0496, PD0553, PD1064, PD1434,
PD1435, PD1444, PD1445, PD1921, PD1921 Series 12 Wide Pendant with Metal
Shade, PD1921 Series, 12 Wide Pendant with Metal Shade, Pendant with Metal
Shade, Metal Shade, Shade
---|---