Sunco VT DU-WH-3550K LED Selectable Vapor Tight Fixture User Manual

Sunco VT DU-WH-3550K LED Selectable Vapor Tight Fixture

Product Information

Specifications

• Voltage: 120V
• Wattage: 50W
• Power Factor: >0.458
• Beam Angle: Not specified
• Frequency: Not specified
• Housing Material: Not specified
• Dimmable: Yes
• Average Lifetime: 50,000 hours
• Lumens: 4200, 5600, 7000 (brightness options)
• Moisture Rating: Wet
• CRI (Color Rendering Index): 80
• Usage: Indoor/Outdoor
• Amps: 0.458A
• Warranty: 7 years

Product Usage Instructions

Before You Start

Safety Information:

• To reduce the risk of fire, electric shock, or physical injury,make sure to follow all safety guidelines and comply with local and National Electric Code (N.E.C.) regulations.
• Avoid using the product where it will be directly exposed to water.
• If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician before proceeding.
• WARNING: Cancer & Reproductive Harm-www.P65Warnings.ca.gov
• For dimming information, please visit www.sunco.com.

Quickstart Guide

1. Step 1: Install brackets with proper spacing for size.
2. Step 2: Unlock the fixture & adjust brightness.
3. Step 3: Snap the housing onto the brackets securely.
4. Step 4: Latch the lens onto the housing.

Installation Guide

1. STEP 1:

   • a. Turn off circuit breaker.
   • b. Drill holes to match product lengths, then insert rubber plugs from the kit.

2. STEP 2: Attach mounting brackets to the surface at the appropriate spacing based on the size.

3. STEP 3:

   • a. Open the fixture by releasing the metal latches.
   • b. Use switches to choose CCT (Correlated Color Temperature)
     and brightness settings.

4. STEP 4: Securely snap the housing onto the mounted brackets.

5. STEP 5:

   • a. Thread supply wire through waterproof gland, connect to terminal block, and tighten gland securely.
   • b. Black to Black (Live): White to White (Neutral): Green to Green (Ground).

6. STEP 6 (Optional): To use dimming feature, connect Pink to Pink and Purple to Purple. Attach the lens to the housing using the metal latches.

FAQ

Common Troubleshooting

We’ve got you covered! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem. If you still need assistance, feel free to contact us.
Our team of lighting experts are happy to help brighten your day.

Issue: Light isn’t turning on.
Solution: Double check if the fixture is properly connected and ensure that the circuit breaker hasn’t been tripped.

Issue: Light isn’t bright enough.
Solution: Adjust the brightness settings using the provided switches on the fixture.

Issue: Light not dimming to lowest setting.
Solution: Ensure that the dimmer switch is compatible with the product. Refer to the recommended dimmer list provided in the user manual.

Issue: Light not dimming smoothly.
Solution: Check the compatibility of the dimmer switch with the product. If the issue persists, consider using a different dimmer switch.

Issue: Light is flickering when turning on.
Solution: Verify that the fixture is properly connected and there are no loose connections. If the issue persists, contact our support team for further assistance.

Issue: Light flickering with lights on the same circuit.
Solution: Check the circuit connections and ensure that they are properly grounded. If the issue continues, consult an electrician.

Issue: Light flickering when turned on.
Solution: Ensure that the fixture is securely mounted and there are no loose connections. If the issue persists, contact our support team for further assistance.

Issue: Light flickering when dimmed.
Solution: Verify that the dimmer switch is compatible with the product. If the issue continues, consider using a different dimmer switch.

Issue: Fixture buzzing with power outages.
Solution: This could be a normal behavior due to power fluctuations. However, if the buzzing is excessive or persistent,please contact our support team for further assistance.

User Manual
LED Selectable Vapor
Tight Fixture

SKU: VT_DU-WH-3550K

Whats in the Box?

Vapor Light

Get Your Gear

Before You Start

Safety Information

To reduce the risk of fire, electric shock, or physical injury:

• Turn off power before changing fixture.

• Suitable for use in damp environments at temperatures ranging from -22°F to 113°F. Not for use where directly exposed to water.

• Not intended for use with emergency fixtures.

• Not compatible with photo controls.

• Not compatible with occupancy sensors.

• Not compatible with 3rd party sensors.

• Not compatible with all dimmers. For more dimming information, please visit www.sunco.com.
  Not compatible with timing devices.

• All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.

• Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.

WARNING:
Cancer & Reproductive Harm- www.P65Warnings.ca.gov

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

Quickstart Guide

Step 1
Install brackets with proper spacing for size.

Step 2
Unlock the fixture & adjust brightness.

Step 3
Snap the housing onto the brackets securely.

Step 4
Latch the lens onto the housing.

Installation Guide

STEP 1

• Turn off circuit breaker.
• Drill holes to match product lengths, then insert rubber plugs from the kit.

STEP 2
Attach mounting brackets to the surface at the appropriate spacing based on the size.

STEP 3

• Open the fixture by releasing the metal latches.
• Use switches to choose CCT and brightness settings.

STEP 4
Securely snap the housing onto the mounted brackets.

STEP 5

• Thread supply wire through waterproof gland,connect to terminal block, and tighten gland securely.
• Black to Black (Live): White to White (Neutral): Green to Green (Ground).

STEP 6

Optional: To use dimming feature, connect Pink to Pink and Purple to Purple.
Attach the lens to the housing using the metal latches.

Product Details

Recommended Dimmers

Specifications

Common Troubleshooting

We’ve got you covered! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.

If you still need some assistance, feel free to contact us. Our team of lighting experts are happy to help brighten your day.

Installation

• Light isn’t turning on.
  Double check if fixture is properly connected and circuit breaker hasn’t been tripped.

• Light isn’t bright enough.
  Check proper wattage & for unobstructed fixture.

Dimming

• Light not dimming to lowest setting.
  Ensure minimum dimmer load requirement is met.

• Light not dimming smoothly.
  Verify dimmer compatibility with fixture.

• Light not compatible with dimmer switch.
  Check light-dimmer compatibility. Consider purchasing compatible switch if necessary.

Flickering

• Light is flickering when turning on.
  Check that fixture wiring connections are secure.

• Light flickering with lights on the same circuit.
  Prevent circuit overload from lights.

• Light flickering when turned on.
  Verify fixture compatibility and that it is grounded.

• Light flickering when dimmed.
  Verify dimmer switch compatibility.

Buzzing

• Fixture buzzing with power outages.
  Confirm secure surge protector link for light.

• Fixture buzzing with appliances.
  Look for nearby interferences that can cause buzzing. Such as televisions, radios, etc.

• Fixture buzzing when dimmed.
  Verify dimmer switch compatibility.

Light Distribution Angle

AVERAGE BEAM ANGLE (50%): 116.5 DEG

UNIT:cd Luminous Intensity Distribution 1

The lighting distribution angle determines how light spreads from a source and impacts its illumination. Two main types exist:
symmetric and asymmetric.

Symmetric Lighting: This emits light evenly in all directions, forming a cone-shaped pattern. Great for general lighting in large areas, it’s used for tasks like area illumination, security, and perimeter lighting. Also applied in up-lighting.

Asymmetric Lighting (Beam Angle): This directs light in a specific direction, reducin glare and spill. Ideal for task lighting, it’s common in settings like landscapes, retail stores, and museums.

Note: Reflectors, lenses, and source-to-surface distance can affect the lighting distribution angle.

Customer Support

Warranty Policy

This product is covered by our industry-leading 7-year warranty.

It gets even better – scan the QR code for 2 extra years of protection!

30 Day Return Policy

At Sunco we value our customers and stand by the quality and performance of our products.
If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service

Our team of lighting experts is here to assist you with all your needs! Contact us at:

Email: support@sunco.com
Call or Text: 844-334-9938

Lighting made better.

support@sunco.com 844-334-9938

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>