iPosible ZJ-SL N Solar Interaction WalI Lamp Instruction Manual
- June 15, 2024
- iPosible
Table of Contents
iPosible ZJ-SL N Solar Interaction WalI Lamp
Specifications
- Name of product: Solar interaction wall lamp
- Model : ZJ-SLN15 0
- Output : 5.5V, 1W
- Battery capacity : 2000mAH
- Angle of the sensor: 120°
- Induction distance: 3-5M
- Brightness: 10001m
- Quantity of LED: 150LED
Product Usage Instructions
Before using the product, please read the following instructions carefully:
Precautions
- During the first use, place the product in a location with sufficient sunlight for charging. The product should be used afterbeing charged for several hours.
- If the product will not be used for a long time, place it in a location with sufficient sunlight to maintain the battery function. Charging for 1 day is recommended once a month to keep the battery in good condition. The charging time and efficiency may varydepending on weather conditions and installation position.
- In order to maximize charging efficiency and effectiveness, use the product in good weather conditions with sunlight and avoidobstructing the solar panel.
- The angle and direction of the solar lamp should be adjusted to the best position. It is suggested that the best height for installation is 2-3 meters.
- During winter or when the sunshine duration is short, it is recommended to use the solar lamp under mode 1.
Use Method
To charge the built-in battery:
- Place the lamp in a location with direct sunlight. Strong sunlight will convert into solar energy more effectively.
To use the solar interaction wall lamp:
- Install the lamp in the desired location where light is required, such as a path, garage, or backyard. Ensure that the light can be easily illuminated by sunlight.
- Long press the switch for 2 seconds to enter mode 1: Human body induction mode. The lamp will turn on when people come near, and it will turn off after people have left for 15 seconds.
Using method:
- Press and hold the switch for 2 seconds to open it.
Notes:
- If there is sunlight or other lights on the solar panel, the lamp will not turn on even if the ON/OFF switch has been turned on. During testing, cover the solar panel with an object to see if the lamp turns on after turning on the switch.
- Fix the device in a suitable place using the provided screws.
- It is recommended to install the lamp vertically against the wall, 2-3 meters above the ground as shown in the picture. Depending on the actual conditions, you can try other installation methods, but do not keep the solar panel upside down as it will affect the effectiveness of solar charging during daylight.
Solar interaction wall lamp
Precautions
- During the first use of the product, place the product in a place with sufficient sun light for charging, the product shou Id be used after being charged for several hours.
- When the product w仆I not be used for a long time, please place the product in a place with sufficient sunlight, too, the charging time is 1 day. For keeping the function of the battery, you’d better comprehensively charge the product in a place with sufficient sunlight for once a month.
- The charging time and charging efficiency of the solar panel may be affected by the weather and the installation position. Considering the conversion rate of solar power generation, if the product is used with good weather, it will gain higher charging efficiency and effectiveness.
- When there’s sunlight and other lights, and if the power switch is off, the LED lamp will not be lightened in day and_ night
- The solar lamp should be installed in the place with sufficient light to ensure the solar panel will absorb sunlight sufficiently, so that the working hour of the solar lamp will be prolonged.
- The angle of the solar lamp and the direction of the light shoul d be adjusted to the best position, it is suggested that the best height is 2-3m.
- During winter or when the sunshine duration is short, it is suggested using the solar lamp under mode 1.
Use method
- For charging the built-in battery, please set lamp in the place with direct sunlight
- The strong sunlight can be converted into solar energy in a more effective way.
- Used in the place where the light is required, such as path, garage and backyard, etc. Within those areas, please place the light in the place where can be easily illuminated by the sunlight
- Used in the place where the light is required, such as ath ara e and back ard etc. Within those areas, please place the light in the place where can be easily illuminated by the sunlight,
Long press for 2s to enter mode 1:
Human body induction mode (the lamp will be on when people come, and
thelamp will be off after the people have left for 15s)
**Using method
**
- Press 2 seconds to open the switch
- Notes : If there’s sunlight or other lights on the solar panel, the lamp will not be on even if the ON/OFF switch has been turned on. During testing, other objective should be used to cover the solar panel, then the lamp will be on after turning on the ON/OFF switch.
- Fix the device ni a fit place with the equipped screws
It is recommended to install vertically against the wall 2-3m high above the ground as picture shown. You can try other ways to install it depending on the actual condition but do not keep the solar panel upside down in anyway ,otherwise will affect the effect of solar charging at daylight
Read User Manual Online (PDF format)
Loading......