Liink1Ga White Dining Table Instruction Manual
- June 15, 2024
- Liink1Ga
Table of Contents
Liink1Ga White Dining Table
PARTS LIST
Please check all the parts list, make sure no one missing or damaged.
Please contact seller if there are any parts missing or damaged.
Installation Instruction
- STEP 1
Screw the 4 holes on top of the legs.
Notes:
1. J and K are two tools to help you easily screw the screws. In this step, you need to screw 4 holes on top of the 4 legs.
2. Do not fully tighten these 4 holes, because 100% tighten them in this step may cause other holes mismatched on the 70% is recommended.
3. Don’t use 6″ til step 4. E, F, G are an accessories set for a single hole on the legs.- STEP 2
Screw the 4 holes on the middle of
Notes:
1. J and K are two tools to help you easily screw the screws
2. In this step, you need to screw 4 holes on the middle of the 4 legs.
3. Do not fully tighten these 4 holes, because 100% tighten them in this step may cause other holes mismatched on the following steps. 70% Is recommended. Don’t use “G” till step 4. E,F,G are an accessories set for a single hole on the legs.
- STEP 3
Installing and securing the table top.
Notes:
1. In this step, you need to screw 12 holes on the boards.
2. Please put a dry cloth on the foor to prevent the boards from scratches. 3. “J” is a tool to help you easily screw the screws. Do not use power drill which may broke the boards, please gently screw the holes with “J”.
- STEP 4
Connecting table top and base together.
Notes:
1. In this step, you need to screw 4 holes on the table top.
2. Please put a dry cloth on the foor to prevent the boards from scratches.
3. “J” is a tool to help you easily screw the screws. Do not use power drill which may broke the boards, please gently screw the holes with “J”.
4. When the base, legs and table top are all connected correctly, check and tighten 100% for all screws, and then cover all the 8 “F” with the 8 “G”. Congratulations! Your assembly project is complete!Read User Manual Online (PDF format)
Loading......