VHD DC12V PG Camera Setup Automatic Tracking User Guide

VHD DC12V PG Camera Setup Automatic Tracking

Product Information

The PG camera setup automatic tracking is a camera system that allows for easy installation and configuration. It provides automatic tracking capabilities and can be connected directly to a computer, via a POE switch, or through a router. The camera provides a DC12V power supply for the computer when directly connected.

Specifications

• Power Supply: DC12V
• Network Connectivity: Ethernet
• Supported Browsers: Internet Explorer
• Camera IP Address: 192.168.1.110 (when not activated)
• Default Account: admin
• Default Password: 123456

Product Usage Instructions

Section A: Connecting the Camera

1. Direct Connection to Computer: Connect the camera directly to the computer and ensure it receives a DC12V power supply.
2. Via POE Switch: Connect the camera to a POE switch.
3. Via Router: Connect the camera to a router.

Section B: Downloading and Opening the Camera Search Tool
To download the camera search tool, visit http://ourdownload.store/

After downloading, follow these steps:

1. Check if the camera’s IP address is in the same network segment as the computer’s IP address. If not, modify the camera IP to match the computer’s network segment (first three digits of IP address should be the same).
2. Open the IE browser.
3. Enter the camera’s IP address into the browser.
4. Enter the camera account password.
5. Download and install the plug-in preview (ensure to close the browser during installation to prevent installation failure).

Section C: Configuring Camera Settings
After opening the IE browser and installing the plug-in, follow these steps:

1. Use the default account “admin” and password “123456” to log in.
2. Check if the human detection function is turned on.
3. Click “live” to enable automatic tracking in Preset call 152.

Frequently Asked Questions (FAQ)

Q: What is the default account and password for logging into the camera?

• A: The default account is “admin” and the password is “123456”.

Q: How can I ensure that the plug-in installation is successful?

• A: Close the browser during plug-in installation to prevent any installation failures.

PG camera setup automatic tracking

A. Connect the camera.

1. The camera is directly connected to the computer and provides a DC12V power supply for it.
2. Connect via POE switch.
3. Connect via router.

• B. Download and open the camera search tool. (the IP address of the camera that has not been activated is 192.168.1.110.)
  Download: http://ourdownload.store_

• Check whether the camera’s IP is in the same network segment as the computer’s IP. If it is different, modify the camera IP to be in the same network segment as the computer. (the first three digits of the camera’s IP address are the same as the computer’s IP address, and the last digit is different.)

• C. Open the lE browser, fill in the camera IP address, fill in the camera account password, and download the plug-in preview (Need to close the browser when installing the plug-in toprevent the plug-in installation from being unsuccessful)

INSTRUCTION

1. The initial account is admin and the password is 123456.
2. Check whether the human detection function is turned on.
3. Click “live” to enable automatic tracking in “Preset” call 152.

References

• ourdownload.store/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>